From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arthur LAMBERT Date: Sun, 21 Jun 2015 02:49:56 +0200 Subject: [Buildroot] [PATCH 4/4] firmware file for wifi In-Reply-To: <20150619172017.GA3638@free.fr> References: <1434727794-9419-1-git-send-email-lambertarthur22@gmail.com> <1434727794-9419-4-git-send-email-lambertarthur22@gmail.com> <20150619172017.GA3638@free.fr> Message-ID: <20150621004956.GB23827@arthur-debian> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Le Friday 19 Jun 2015 ?? 19:20:17 (+0200), Yann E. MORIN a ??crit : > Arthur, All, > > On 2015-06-19 17:29 +0200, Arthur LAMBERT spake thusly: > > Signed-off-by: Arthur LAMBERT > > --- > > .../lib/firmware/brcm/brcmfmac4330-sdio.bin | Bin 0 -> 222126 bytes > > .../lib/firmware/brcm/brcmfmac4330-sdio.txt | 40 +++++++++++++++++++++ > > 2 files changed, 40 insertions(+) > > create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin > > create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt > > > > diff --git a/board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin b/board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin > > new file mode 100644 > > index 0000000000000000000000000000000000000000..e3bc355467de633b9717ba1c2a7411ac4c4a8b6c > > This firmware file is available in linux-firmware, and it is installed > if you choose BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX. Ok I will add this package to defconfig and will remove txt/bin firmware file from patch > > > diff --git a/board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt b/board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt > > new file mode 100644 > > index 0000000..9546246 > > --- /dev/null > > +++ b/board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt > > What is the purpose of this file? > > Is it really specific to the warpboard, or can it be used on other > boards? I mean, why do we need this file specifically on the warpboard? > > How is this file used by the firmware? > This file is requested by the brcmfmac driver. It is not specific to warpboard, but specific to brcm4330. This txt file is also present in BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX so I can also remove it from the patch > Regards, > Yann E. MORIN. > Regards, Arthur. > > @@ -0,0 +1,40 @@ > > +# bcm94330wlsdgb.txt > > +manfid=0x2d0 > > +prodid=0x0552 > > +vendid=0x14e4 > > +devid=0x4360 > > +boardtype=0x0552 > > +boardrev=0x11 > > +# this design has 2.4GHz SP3T switch > > +boardflags=0x00080200 > > +nocrc=1 > > +xtalfreq=37400 > > +boardnum=22 > > +macaddr=00:90:4c:c5:12:38 > > +ag0=255 > > +aa2g=1 > > +ccode=CN > > +pa0b0=0x14d0 > > +pa0b1=0xfd98 > > +pa0b2=0xff78 > > +rssismf2g=0xa > > +rssismc2g=0x3 > > +rssisav2g=0x7 > > +maxp2ga0=0x50 > > +sromrev=3 > > +il0macaddr=00:90:4c:c5:12:38 > > +wl0id=0x431b > > +cckPwrOffset=5 > > +ofdm2gpo=0x66666666 > > +mcs2gpo0=0x6666 > > +mcs2gpo1=0x6666 > > +swctrlmap_2g=0x04040404,0x02020202,0x02020404,0x10202,0x1ff > > +swctrlmap_5g=0x00100010,0x00280020,0x00200010,0x14202,0x2f8 > > +rfreg033=0x19 > > +rfreg033_cck=0x1f > > +dacrate2g=160 > > +txalpfbyp2g=1 > > +bphyscale=17 > > +cckPwrIdxCorr=-15 > > +pacalidx2g=45 > > +txgaintbl=1 > > -- > > 1.9.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------'