Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v6 08/16] package/opencv: add python support
Date: Fri, 26 Jun 2015 19:51:07 +0200	[thread overview]
Message-ID: <20150626175107.GA12470@free.fr> (raw)
In-Reply-To: <1435262397-888-9-git-send-email-s.martin49@gmail.com>

Samuel, All,

On 2015-06-25 21:59 +0200, Samuel Martin spake thusly:
> opencv_python module needs python-numpy because it uses some numpy
> headers in this wrapper.
> 
> From its 2.4 release, OpenCV offers python bindings, but they required
> most of the OpenCV modules to be enabled.
> 
> Since OpenCV-3.0.0, python bindings have been reworked:
> - it now supports both python2 and python3
> - only built modules supporting wrapped in python will be included in
>   the bindings.

With Python2 enabled, I still see this in the configure log:

    --   Python 2:
    --     Interpreter:     /home/ymorin/dev/buildroot/O/host/usr/bin/python2 (ver 2.7.10)
    --     Libraries:       /home/ymorin/dev/buildroot/O/host/usr/i586-buildroot-linux-gnu/sysroot/usr/lib32/libpython2.7.so (ver 2.7.10)
    --     numpy:           /home/ymorin/dev/buildroot/O/host/usr/i586-buildroot-linux-gnu/sysroot/usr/lib/python2.7/site-packages/numpy/core/include
           (ver undefined - cannot be probed because of the cross-compilation)
    --     packages path:   /usr/lib/python2.7/site-packages
    --
    --   Python 3:
    --     Interpreter:     /usr/bin/python3.4 (ver 3.4)
    --

Should we force the configure step to find python3 as something like
/bin/false to avoid any potential issue, even if we already pass
-DBUILD_opencv_python3=OFF

(Similarly with python2 when python3 is enabled, of course.)

> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

(reviewed tag still valid)

Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Build-tested only, for i586.

Regards,
Yann E. MORIN.

> ---
> changes v5->v6:
> - rebase
> 
> changes v4->v5:
> - rebase
> - update a/r/t tags
> - update commit log
> - fix python-numpy selection
> - add python3 support
> 
> changes v3->v4:
> - rebase
> - rename _OPT -> _OPTS
> - remove python/numpy patch (merged upstream since opencv bump)
> 
> changes v2->v3:
> - rebase
> - add fetch uri in the opencv's patch (Yann)
> - move pyhton module knob under the multi-line if block about python deps
>   (Yann)
> 
> changes v1->v2:
> - rebase
> - use patch merged upstream
> ---
>  package/opencv/Config.in | 12 +++++++++++-
>  package/opencv/opencv.mk | 33 +++++++++++++++++++++++++++++++--
>  2 files changed, 42 insertions(+), 3 deletions(-)
> 
> diff --git a/package/opencv/Config.in b/package/opencv/Config.in
> index 3c00525..8ed505e 100644
> --- a/package/opencv/Config.in
> +++ b/package/opencv/Config.in
> @@ -89,7 +89,17 @@ config BR2_PACKAGE_OPENCV_LIB_PHOTO
>  	  Include opencv_photo (computational photography) module into the OpenCV
>  	  build.
>  
> -comment "opencv_python module requires numpy which is not yet available."
> +config BR2_PACKAGE_OPENCV_LIB_PYTHON
> +	bool "python"
> +	depends on BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3
> +	depends on BR2_aarch64 || BR2_arm || BR2_armeb || BR2_i386 \
> +		|| BR2_mips || BR2_mipsel || BR2_powerpc || BR2_powerpc64 \
> +		|| BR2_sh || BR2_x86_64 # python-numpy
> +	depends on !BR2_TOOLCHAIN_USES_UCLIBC || BR2_i386 || BR2_x86_64 # python-numpy
> +	select BR2_PACKAGE_PYTHON_NUMPY
> +	help
> +	  Include opencv_python module into the OpenCV build.
> +	  No python example is installed.
>  
>  config BR2_PACKAGE_OPENCV_LIB_SHAPE
>  	bool "shape"
> diff --git a/package/opencv/opencv.mk b/package/opencv/opencv.mk
> index 7211c18..a43de0c 100644
> --- a/package/opencv/opencv.mk
> +++ b/package/opencv/opencv.mk
> @@ -78,8 +78,6 @@ OPENCV_CONF_OPTS += \
>  	-DBUILD_opencv_ml=$(if $(BR2_PACKAGE_OPENCV_LIB_ML),ON,OFF) \
>  	-DBUILD_opencv_objdetect=$(if $(BR2_PACKAGE_OPENCV_LIB_OBJDETECT),ON,OFF) \
>  	-DBUILD_opencv_photo=$(if $(BR2_PACKAGE_OPENCV_LIB_PHOTO),ON,OFF) \
> -	-DBUILD_opencv_python2=OFF \
> -	-DBUILD_opencv_python3=OFF \
>  	-DBUILD_opencv_shape=$(if $(BR2_PACKAGE_OPENCV_LIB_SHAPE),ON,OFF) \
>  	-DBUILD_opencv_stitching=$(if $(BR2_PACKAGE_OPENCV_LIB_STITCHING),ON,OFF) \
>  	-DBUILD_opencv_superres=$(if $(BR2_PACKAGE_OPENCV_LIB_SUPERRES),ON,OFF) \
> @@ -282,6 +280,37 @@ else
>  OPENCV_CONF_OPTS += -DWITH_V4L=OFF -DWITH_LIBV4L=OFF
>  endif
>  
> +ifeq ($(BR2_PACKAGE_OPENCV_LIB_PYTHON),y)
> +ifeq ($(BR2_PACKAGE_PYTHON),y)
> +OPENCV_CONF_OPTS += \
> +	-DBUILD_opencv_python2=ON \
> +	-DBUILD_opencv_python3=OFF \
> +	-DPYTHON2_EXECUTABLE=$(HOST_DIR)/usr/bin/python2 \
> +	-DPYTHON2_INCLUDE_PATH=$(STAGING_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR) \
> +	-DPYTHON2_LIBRARIES=$(STAGING_DIR)/usr/lib/libpython$(PYTHON_VERSION_MAJOR).so \
> +	-DPYTHON2_NUMPY_INCLUDE_DIRS=$(STAGING_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/numpy/core/include \
> +	-DPYTHON2_PACKAGES_PATH=/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages \
> +	-DPYTHON2_NUMPY_VERSION=$(PYTHON_NUMPY_VERSION)
> +OPENCV_DEPENDENCIES += python
> +else
> +OPENCV_CONF_OPTS += \
> +	-DBUILD_opencv_python2=OFF \
> +	-DBUILD_opencv_python3=ON \
> +	-DPYTHON3_EXECUTABLE=$(HOST_DIR)/usr/bin/python3 \
> +	-DPYTHON3_INCLUDE_PATH=$(STAGING_DIR)/usr/include/python$(PYTHON3_VERSION_MAJOR)m \
> +	-DPYTHON3_LIBRARIES=$(STAGING_DIR)/usr/lib/libpython$(PYTHON3_VERSION_MAJOR)m.so \
> +	-DPYTHON3_NUMPY_INCLUDE_DIRS=$(STAGING_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/numpy/core/include \
> +	-DPYTHON3_PACKAGES_PATH=/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages \
> +	-DPYTHON3_NUMPY_VERSION=$(PYTHON_NUMPY_VERSION)
> +OPENCV_DEPENDENCIES += python3
> +endif
> +OPENCV_DEPENDENCIES += python-numpy
> +else
> +OPENCV_CONF_OPTS += \
> +	-DBUILD_opencv_python2=OFF \
> +	-DBUILD_opencv_python3=OFF
> +endif
> +
>  # Installation hooks:
>  define OPENCV_CLEAN_INSTALL_DOC
>  	$(RM) -fr $(TARGET_DIR)/usr/share/OpenCV/doc
> -- 
> 2.4.4
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2015-06-26 17:51 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-25 19:59 [Buildroot] [PATCH v6 00/16] OpenCV bump Samuel Martin
2015-06-25 19:59 ` [Buildroot] [PATCH v6 01/16] package/opencv: alphabetically sorted each _CONF_OPTS group Samuel Martin
2015-06-25 22:00   ` Yann E. MORIN
2015-06-26 18:35   ` Thomas Petazzoni
2015-06-25 19:59 ` [Buildroot] [PATCH v6 02/16] package/opencv: bump to version 3.0 Samuel Martin
2015-06-26 14:51   ` Yann E. MORIN
2015-06-26 15:22     ` Yann E. MORIN
2015-06-26 18:39   ` Thomas Petazzoni
2015-06-25 19:59 ` [Buildroot] [PATCH v6 03/16] package/gstreamer1/gst1-plugins-bad: disable opencv plugin with opencv-3 Samuel Martin
2015-06-25 19:59 ` [Buildroot] [PATCH v6 04/16] package/opencv: define modules inter-dependencies Samuel Martin
2015-06-26 15:20   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 05/16] package/opencv: reword modules' prompt and help text Samuel Martin
2015-06-26 15:27   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 06/16] package/opencv: reduce modules on by default Samuel Martin
2015-06-26 15:30   ` Yann E. MORIN
2015-06-26 15:34   ` Yann E. MORIN
2015-06-26 15:35     ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 07/16] package/opencv: disable all modules " Samuel Martin
2015-06-26 15:36   ` Yann E. MORIN
2015-07-06 22:19     ` Arnout Vandecappelle
2015-06-25 19:59 ` [Buildroot] [PATCH v6 08/16] package/opencv: add python support Samuel Martin
2015-06-26 17:51   ` Yann E. MORIN [this message]
2015-06-26 17:59   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 09/16] package/opencv: add a choice for selecting gstreamer support Samuel Martin
2015-06-26 18:11   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 10/16] package/opencv: add gstreamer-1.x support Samuel Martin
2015-06-26 18:12   ` Yann E. MORIN
2015-06-26 20:01   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 11/16] package/opencv: add openmp support Samuel Martin
2015-06-25 19:59 ` [Buildroot] [PATCH v6 12/16] package/opencv: add a choice for selecting the gui toolkit Samuel Martin
2015-06-26 21:31   ` Yann E. MORIN
2015-06-26 22:47   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 13/16] package/opencv: add qt5 support Samuel Martin
2015-06-26 22:40   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 14/16] package/opencv: add gtk3 support Samuel Martin
2015-06-26 23:00   ` Yann E. MORIN
2015-07-04 17:51     ` Samuel Martin
2015-06-25 19:59 ` [Buildroot] [PATCH v6 15/16] package/opencv: add opengl support Samuel Martin
2015-06-27  7:55   ` Yann E. MORIN
2015-06-25 19:59 ` [Buildroot] [PATCH v6 16/16] package/vlc: add opencv support Samuel Martin
2015-06-25 20:04 ` [Buildroot] [PATCH v6 00/16] OpenCV bump Samuel Martin
2015-06-26 18:47 ` Thomas Petazzoni
2015-07-04 13:34   ` Thomas Petazzoni
2015-07-04 19:00     ` Samuel Martin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150626175107.GA12470@free.fr \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox