From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sat, 4 Jul 2015 15:03:59 +0200 Subject: [Buildroot] [PATCH v4 1/1] board: add support for WarPboard In-Reply-To: <1435742562-31718-1-git-send-email-lambertarthur22@gmail.com> References: <1435742562-31718-1-git-send-email-lambertarthur22@gmail.com> Message-ID: <20150704150359.48f5a3a1@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Arthur LAMBERT, On Wed, 1 Jul 2015 11:22:42 +0200, Arthur LAMBERT wrote: > This is a set of patch to add support for warpboard > (Freescale board based on imx6sl) > > The patch contains : > - defconfig for warpboard > - linux patches from Fabio Estevam to fix device tree due to last change on > warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which > use incorrect hci protocol > - specific firmware file for warpboard bluetooth > nvram : brcmfmac4330-sdio.txt > > Origin of nvram config file for wifi : > https://github.com/Freescale/meta-fsl-arm-extra > > Signed-off-by: Arthur LAMBERT > --- > Changes v3 -> v4: > - Commit log should be wrapped to 80 columns > - Add more details about bluetooth and rootfs in README > - Enable host-dfu-util in defconfig > Changes v2 -> v3: > - Use imx_v6_v7_defconfig instead of custom config. > - Add patch to enable good hci protocol for bluetooth in kernel config > - Use internal sdma firmware instead of external since the 1.12 integrate > good firmware. > - Fix some typo > - Add some extra info in README and remove useless section > - Fix patch naming convention > - Use GLOBAL_PATH_DIR for all patches > - Move some section in defconfig to keep .config ordering > - Upgrade uboot to 2015.07-rc2 to fix bug on dfu process > Changes v1 -> v2: > - add specific kernel headers > - use wget download rather than git download for kernel > - fix version symbol for uboot > - add imx_usb_loader host utility > - remove bin firmware file and enable linux-firmware package instead > - fix command to enable bluetooth and fix protocol for hci in custom > kernel config Applied after doing a good number of misc improvements to the README file, as discussed earlier in this thread. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com