From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 4 Aug 2015 20:06:17 +0200 Subject: [Buildroot] [PATCH v2] board: add support for ARC AXS101 and AXS103 Software Development Platforms In-Reply-To: <1438698110-3664-1-git-send-email-abrodkin@synopsys.com> References: <1438698110-3664-1-git-send-email-abrodkin@synopsys.com> Message-ID: <20150804200617.1bbfb02f@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Alexey Brodkin, On Tue, 4 Aug 2015 17:21:50 +0300, Alexey Brodkin wrote: > The AXS10x Platform consists of a DesignWare AXC001 CPU > Card (with ARC 770D core) in case of AXS101 or AXC003 CPU Card > (typically with ARC HS38 core) in case of AXS103 mounted on an > ARC Software Development Platform Mainboard with DesignWare peripherals: > * SD/MMC contoller > * Gigabit network contoller > * Serial ports (8250-compatible) > * USB 2.0 > * SPI > * I2C > > It also houses HDMI output for external monitor connection. > > For stand-alone usage of the board (with only keyboard, mouse and montor > attached) kernel console and getty made available on tty0 as well as on > serial port (ttyS3). > > Note there're 2 prerequisites: > [1] u-boot: 2015.07 - fix creation of .config > http://patchwork.ozlabs.org/patch/502558/ > > [2] binutils: fix buildng of Linux kernel for ARCv2 ISA > http://patchwork.ozlabs.org/patch/503550/ > > Signed-off-by: Alexey Brodkin > Cc: Thomas Petazzoni > Cc: Gustavo Zacarias > --- Applied, thanks. For defconfigs, we generally like to have a readme.txt file in board// that explains how to flash/use the generated system on the HW. But that's of course only if special instructions are needed. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com