From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 31 Aug 2015 22:45:44 +0200 Subject: [Buildroot] First rootfile system build using buildroot In-Reply-To: References: Message-ID: <20150831224544.22ddf67b@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dinesh, On Mon, 31 Aug 2015 20:07:50 +0530, Dinesh Guleria wrote: > I am new to buildroot. I am Trying to learn it. I am following this manual. > http://buildroot.uclibc.org/downloads/manual/manual.html > > So i have started with Rpi. > > I am trying to build my own rootfile system for RPI using buildroot. > > I have downloaded following cross compiler folder from git :-- > https://github.com/raspberrypi/tools/tree/master/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian > as mentioned in this link :-- > http://hertaville.com/2012/09/28/development-environment-raspberry-pi-cross-compiler/ If you're a beginner with Buildroot, don't start with a customer compiler. Either use the one generated by Buildroot ("Buildroot toolchain") or use a pre-defined external toolchain ("Sourcery CodeBench 2014.05" if you're using the RPi 1, or "Linaro" if you're using the RPi 2). Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com