From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 8 Sep 2015 12:00:34 +0200 Subject: [Buildroot] Right board to use -- buildroot begniers In-Reply-To: References: <55EDE7A6.4060902@mind.be> <55EE8B90.9060708@mind.be> Message-ID: <20150908120034.513fdc29@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Tue, 8 Sep 2015 14:26:31 +0530, Dinesh Guleria wrote: > With seggers j- link can i flash uboot to the Nand flash of this board ? You don't need that. The Atmel SoCs have a built-in "monitor" that you can talk to over the USB device port. It requires a tool called SAM-BA. If you're looking at beginning with the Atmel Xplained, you can follow the slides/labs at http://free-electrons.com/training/embedded-linux/, this training is done on this platform, and will teach you how to build and flash the bootloader, how to build and run a kernel, how to build your minimal userspace, how to use Buildroot, etc. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com