From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 16 Sep 2015 22:22:14 +0200 Subject: [Buildroot] [v3 2/2] openssl: enable parallel build and installation In-Reply-To: <1442405185-4103-3-git-send-email-ryanbarnett3@gmail.com> References: <1442405185-4103-1-git-send-email-ryanbarnett3@gmail.com> <1442405185-4103-3-git-send-email-ryanbarnett3@gmail.com> Message-ID: <20150916222214.7807f6d4@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Ryan Barnett, On Wed, 16 Sep 2015 07:06:25 -0500, Ryan Barnett wrote: > This is a patch that is originally based on a patch Thomas P. > submitted for an earlier version of this package. I have adopted this > patch to use the latest available Gentoo parallel patch. I have also > seen about a minute improvement on my build times of openssl. > > Part of Thomas P's original message: > > On my build server, the current build of OpenSSL takes 1 minutes and > 20 seconds. With this commit applied, enabling parallel build and > installation, the build only takes 28 seconds. > > All the patches are downloaded from Gentoo. > > There is apparently some interest in upstream OpenSSL to enable > parallel build, see for example commit > https://github.com/openssl/openssl/commit/c3f22253b139793ff3b91ff7e6969e180cf06815. This > commit is not part of any OpenSSL release, but we can hope that the > problem will resolved in the future. > > Signed-off-by: Ryan Barnett > CC: Thomas Petazzoni > CC: Gustavo Zacarias > CC: Arnout Vandecappelle > > --- > Changes from v2 to v3: > - No changes Applied, thanks. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com