From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 4 Oct 2015 17:51:15 +0100 Subject: [Buildroot] [PATCH] python-numpy: re-enable for uClibc In-Reply-To: <1443972881-24357-1-git-send-email-arnout@mind.be> References: <1443972881-24357-1-git-send-email-arnout@mind.be> Message-ID: <20151004175115.7be4e036@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Arnout Vandecappelle (Essensium/Mind), On Sun, 4 Oct 2015 16:34:41 +0100, Arnout Vandecappelle (Essensium/Mind) wrote: > In commit b0f025386f6861fdc21e38e3a33b65669276f2c2 a patch was added > to make sure that python-numpy does work in uClibc. This patch was > needed for the x86 architecture, because uClibc in fact does support > fenv for x86. However, we don't turn on this support in our uClibc > config. Because the Config.in depends still allowed uClibc for x86, > this lead to a built failure, which lead to the fix in commit b0f02538. > But since this fix also fixes it for all other (supported) > architectures, we can just remove the !uClibc dependency completely. > > This is also propagated to the reverse dependency in opencv3. > > Signed-off-by: Arnout Vandecappelle (Essensium/Mind) > Cc: Gwenhael Goavec-Merou > --- > package/opencv3/Config.in | 1 - > package/python-numpy/Config.in | 3 --- > 2 files changed, 4 deletions(-) Applied, thanks. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com