From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 14 Oct 2015 23:31:06 +0200 Subject: [Buildroot] [PATCH 2/2] toolchain-external: bypass buildroot wrapper In-Reply-To: <1444856755-2011-2-git-send-email-arnout@mind.be> References: <20151011120859.7e786a73@free-electrons.com> <1444856755-2011-1-git-send-email-arnout@mind.be> <1444856755-2011-2-git-send-email-arnout@mind.be> Message-ID: <20151014233106.416d10e6@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Arnout, On Wed, 14 Oct 2015 23:05:55 +0200, Arnout Vandecappelle (Essensium/Mind) wrote: > Lightly tested with an internal toolchain, an external Sourcery > toolchain, an external downloaded buildroot toolchain, and an external > pre-installed buildroot toolchain. Did you test with a pre-existing Buildroot toolchain (i.e that predates the introduction of the wrapper for internal toolchain), or did you build a Buildroot toolchain with the latest Buildroot (including your patches) and then re-used it as an external toolchain in another Buildroot configuration ? Thanks, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com