From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 18 Oct 2015 15:32:59 +0200 Subject: [Buildroot] Update of toolchains used in the autobuilders Message-ID: <20151018153259.0bd5eaca@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, I've rebuilt all pre-built Buildroot toolchains used for the autobuilders with the latest Buildroot, and deployed them in the autobuilders. Things worth mentioning: - the br-arm-full-static and br-x86-64-core2-full toolchains are built with 3.14 kernel headers instead of the default (latest) ones, in order to test a bit some older kernel headers. Note that the br-arm-full configuration was already built with 3.10 headers for the same reason, and continues to be built with 3.10 headers. - the br-mips64-n64-full toolchain could not be built. It used to use glibc, but now that uClibc support for MIPS64 has been enabled, it tried to build with uClibc, and the build fails (I'll report the problem separately to Waldemar and Vicente) - the pre-built musl toolchains have not been updated, because due to commit bb41933d3642f44c8d2db07886b2e5bf18b97fad, there is no longer a libc.a generated in the musl toolchains, which breaks the external toolchain logic to find the sysroot. - I've added a br-sparc64-glibc configuration, following the addition of Sparc64 support by Waldemar. Hopefully this configuration will give less issues than the 32 bits Sparc v8 configuration we have. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com