From mboxrd@z Thu Jan  1 00:00:00 1970
From: Yann E. MORIN <yann.morin.1998@free.fr>
Date: Thu, 29 Oct 2015 21:26:41 +0100
Subject: [Buildroot] [PATCH] fs/ext2: add options for extra space and
 extra inodes
In-Reply-To: <1446109218-11057-3-git-send-email-jezz@sysmic.org>
References: <1446109218-11057-1-git-send-email-jezz@sysmic.org>
 <1446109218-11057-3-git-send-email-jezz@sysmic.org>
Message-ID: <20151029202641.GC3600@free.fr>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

J?r?me, All,

On 2015-10-29 10:00 +0100, J?r?me Pouiller spake thusly:
> This patch has same purpose than 49964858f45d2243c513e6d362e992ad89ec7a45:
> 
>   On some machines, the network interface is slow to appear. For example,
>   on the Raspberry Pi, the network interface eth0 is an ethernet-over-USB,
>   and our standard boot process is too fast, so our network startup script
>   is called before the USB bus is compeltely enumerated, thus it can't
>   configure eth0.
> 
>   Closes #8116.
> 
> However, wait-delay hook is enabled only if wait-delay property appears
> in /etc/network/interfaces. This patch enable it automaticaly when
> interface is configured through DHCP at bootup. But, if user choose
> to write /etc/network/interface himself, he have to explicitly
> set wait-delay.
> 
> Signed-off-by: J?r?me Pouiller <jezz@sysmic.org>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

I hope I'll have time to do a run test later tonight... However, I am
far from my RPis tonight (the whole week, in fact) but I'll try to sneak
downstairs to grab one... :-]

Regards,
Yann E. MORIN.

> ---
>  package/skeleton/skeleton.mk                       |  1 +
>  system/skeleton/etc/network/if-pre-up.d/wait_iface | 21 +++++++++++++++++++++
>  2 files changed, 22 insertions(+)
>  create mode 100755 system/skeleton/etc/network/if-pre-up.d/wait_iface
> 
> diff --git a/package/skeleton/skeleton.mk b/package/skeleton/skeleton.mk
> index 920d3b4..d1b797d 100644
> --- a/package/skeleton/skeleton.mk
> +++ b/package/skeleton/skeleton.mk
> @@ -89,6 +89,7 @@ define SET_NETWORK_DHCP
>  		echo ;                                               \
>  		echo "auto $(NETWORK_DHCP_IFACE)";                   \
>  		echo "iface $(NETWORK_DHCP_IFACE) inet dhcp";        \
> +		echo "	wait-delay 15";                              \
>  	) >> $(TARGET_DIR)/etc/network/interfaces
>  endef
>  endif
> diff --git a/system/skeleton/etc/network/if-pre-up.d/wait_iface b/system/skeleton/etc/network/if-pre-up.d/wait_iface
> new file mode 100755
> index 0000000..ebccff2
> --- /dev/null
> +++ b/system/skeleton/etc/network/if-pre-up.d/wait_iface
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +# In case we have a slow-to-appear interface (e.g. eth-over-USB),
> +# and we need to configure it, wait until it appears, but not too
> +# long either. IF_WAIT_DELAY is in seconds.
> +
> +if [ "${IF_WAIT_DELAY}" -a ! -e "/sys/class/net/${IFACE}" ]; then
> +    printf "Waiting for interface %s to appear" "${IFACE}"
> +    while [ ${IF_WAIT_DELAY} -gt 0 ]; do
> +        if [ -e "/sys/class/net/${IFACE}" ]; then
> +            printf "\n"
> +            exit 0
> +        fi
> +        sleep 1
> +        printf "."
> +        : $((IF_WAIT_DELAY -= 1))
> +    done
> +    printf " timeout!\n"
> +    exit 1
> +fi
> +
> -- 
> 2.1.4
> 

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'