From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steve Morris Date: Sun, 20 Dec 2015 05:36:18 -0800 Subject: [Buildroot] Trouble bringing up Raspberry Pi In-Reply-To: <20151220102721.16b3d82b@free-electrons.com> References: <20151219201126.GA9718@buinea.com> <20151220102721.16b3d82b@free-electrons.com> Message-ID: <20151220133618.GA8906@buinea.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Thomas, Thank you for the response. Yes, I followed those instructions at least a couple of times for both volatile and persistent root. It hung during boot until I added the mdev selection. I was able to get keyboard input working by loading the hid-microsoft module ( microsoft USB keyboard ), but I was assuming a minimal system could read a generic USB keyboard. I'll try it again from scratch and see if I have better results. Steve On Sun, Dec 20, 2015 at 10:27:21AM +0100, Thomas Petazzoni wrote: > Steve, > > On Sat, 19 Dec 2015 12:11:26 -0800, Steve Morris wrote: > > > Perhaps a working .config for the Pi B+ would set me in the right > > direction. > > Did you try: > > make raspberrypi_defconfig > make > > And then read the instructions in board/raspberrypi/readme.txt ? > > Best regards, > > Thomas > -- > Thomas Petazzoni, CTO, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com