From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
Date: Tue, 19 Apr 2016 23:33:21 +0200 [thread overview]
Message-ID: <20160419213321.GG3505@free.fr> (raw)
In-Reply-To: <87a8kpe39z.fsf@dell.be.48ers.dk>
Ubaldo, Peter, All,
On 2016-04-19 22:45 +0200, Peter Korsgaard spake thusly:
> >>>>> "Ubaldo" == Ubaldo Porcheddu <ubaldo@eja.it> writes:
>
> > Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
> > ---
> > board/raspberrypi/genimage-raspberrypi2.cfg | 1 +
> > configs/raspberrypi2_defconfig | 4 ++--
> > package/rpi-firmware/rpi-firmware.mk | 2 +-
> > 3 files changed, 4 insertions(+), 3 deletions(-)
>
> Thanks for the patch, but can you instead split it up 2 seperate
> patches (with sensible descriptions) - One bumping the rpi-firmware
> version and one updating the rpi2 config to also support rpi3.
>
> The rpi3 afaik uses a different serial port than rpi2. How will that
> work if we use the same defconfig for both boards? Perhaps it makes more
> sense to have a seperate raspberrypi3_defconfig?
Yes, expecially since the CPU is not the same, andthat we may^Wwill one
day have it run in 64-bit mode (one can dream, no?).
So yes, make it a separate defconfig, please.
Regards,
Yann E. MORIN.
> > diff --git a/board/raspberrypi/genimage-raspberrypi2.cfg b/board/raspberrypi/genimage-raspberrypi2.cfg
> > index 443c821..453fb00 100644
> > --- a/board/raspberrypi/genimage-raspberrypi2.cfg
> > +++ b/board/raspberrypi/genimage-raspberrypi2.cfg
> > @@ -2,6 +2,7 @@ image boot.vfat {
> > vfat {
> > files = {
> > "bcm2709-rpi-2-b.dtb",
> > + "bcm2710-rpi-3-b.dtb",
> > "rpi-firmware/bootcode.bin",
> > "rpi-firmware/cmdline.txt",
> > "rpi-firmware/config.txt",
> > diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
> > index ce41ee3..b77db14 100644
> > --- a/configs/raspberrypi2_defconfig
> > +++ b/configs/raspberrypi2_defconfig
> > @@ -13,13 +13,13 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> > BR2_LINUX_KERNEL=y
> > BR2_LINUX_KERNEL_CUSTOM_GIT=y
> > BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
> > -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d33d0293e245badc4ca6ede3984d8bb8ea63cb1a"
> > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="20fe468af4bb40fec0f81753da4b20a8bfc259c9"
> > BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
> > BR2_LINUX_KERNEL_ZIMAGE=y
>
> > # Build the DTB from the kernel sources
> > BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > -BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b bcm2710-rpi-3-b"
>
> > BR2_PACKAGE_RPI_FIRMWARE=y
> > # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
> > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> > index 291da3a..8476678 100644
> > --- a/package/rpi-firmware/rpi-firmware.mk
> > +++ b/package/rpi-firmware/rpi-firmware.mk
> > @@ -4,7 +4,7 @@
> > #
> > ################################################################################
>
> > -RPI_FIRMWARE_VERSION = 8b4e5482b52e6fb438dddc0d88ba0ba8d44af54b
> > +RPI_FIRMWARE_VERSION = 951799bbcd795ddf27769d14acf4813fdcbe53dc
> > RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
> > RPI_FIRMWARE_LICENSE = BSD-3c
> > RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
> > --
> > 1.9.1
>
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
>
>
> --
> Bye, Peter Korsgaard
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2016-04-19 21:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-31 10:51 [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update Ubaldo Porcheddu
2016-04-19 20:45 ` Peter Korsgaard
2016-04-19 21:33 ` Yann E. MORIN [this message]
2016-04-20 7:08 ` Peter Korsgaard
2016-04-20 8:37 ` Ubaldo Porcheddu
2016-04-20 14:25 ` Gustavo Zacarias
2016-04-23 8:36 ` Peter Korsgaard
2016-04-23 16:53 ` Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160419213321.GG3505@free.fr \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox