From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 27 Apr 2016 13:31:49 +0200 Subject: [Buildroot] [PATCH 1/2] uboot and arm trusted firmware build added to juno board In-Reply-To: <20160427102302.GM28464@e106497-lin.cambridge.arm.com> References: <20160426221915.2651d4b2@free-electrons.com> <20160427102302.GM28464@e106497-lin.cambridge.arm.com> Message-ID: <20160427133149.330a7ea0@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Wed, 27 Apr 2016 11:23:02 +0100, Liviu.Dudau at arm.com wrote: > > On Tue, 26 Apr 2016 17:35:55 +0100, Joao Pinto wrote: > > > > > + +-- u-boot.bin > > > + +-- bl1.bin > > > + +-- bl2.bin > > > + +-- bl2u.bin > > > + +-- bl31.bin > > > + +-- fip.bin > > > > Looking at your atfirmware package, I see bl1.bin and fip.bin being > > copied to output/images, but not bl2.bin, bl2u.bin and bl31.bin. Why > > are you mentioning them here? > > Those get embedded into the fip.bin. For Juno you need only bl1.bin and > fip.bin to be transfered to the board. Right, and they are indeed not copied to $(BINARIES_DIR) by the atfirmware package. So they shouldn't be mentioned in the readme.txt. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com