From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v6 2/3] barebox: support auxiliary config build
Date: Sun, 1 May 2016 14:34:40 +0200 [thread overview]
Message-ID: <20160501143440.68983c1e@free-electrons.com> (raw)
In-Reply-To: <f070ae02cf8e605859c8e3e64b6f5f4e864b951c.1461531859.git.pieter@boesman.nl>
Hello,
On Sun, 24 Apr 2016 23:15:24 +0200, Pieter Smith wrote:
> Adds support to build barebox with an auxiliary config.
>
> This is useful for building an SPL (Secondary Program Loader) in addition to
> the traditional TPL (Tertiary Program Loader). The Beaglebone Black for example
> has two barebox configurations:
> - am335x_defconfig builds the full barebox bootloader with device tree, and
> - am335x_mlo_defconfig builds the smaller MLO bootloader that loads the full
> barebox bootloader from the eMMC or SD card.
>
> Tested with the following defconfig:
>
> # architecture
> BR2_arm=y
> BR2_cortex_a8=y
> BR2_ARM_EABIHF=y
>
> # system
> BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
> BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
>
> # filesystem
> BR2_PACKAGE_AM33X_CM3=y
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
> # bootloader
> BR2_TARGET_BAREBOX=y
> BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
> BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
> BR2_TARGET_BAREBOX_CUSTOM_ENV=y
> BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
> BR2_TARGET_BAREBOX_AUX=y
> BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
> BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"
>
> # kernel
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_USE_DEFCONFIG=y
> BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
> BR2_LINUX_KERNEL_ZIMAGE=y
>
> # use the barebox built-in dtb
> # BR2_LINUX_KERNEL_DTS_SUPPORT is not set
>
> Signed-off-by: Pieter Smith <pieter@boesman.nl>
> ---
> boot/barebox/Config.in | 15 ++++++++
> boot/barebox/barebox-aux/Config.in | 60 +++++++++++++++++++++++++++++++
> boot/barebox/barebox-aux/barebox-aux.hash | 1 +
> boot/barebox/barebox-aux/barebox-aux.mk | 8 +++++
> boot/barebox/barebox.mk | 1 +
> 5 files changed, 85 insertions(+)
> create mode 100644 boot/barebox/barebox-aux/Config.in
> create mode 120000 boot/barebox/barebox-aux/barebox-aux.hash
> create mode 100644 boot/barebox/barebox-aux/barebox-aux.mk
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-05-01 12:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-24 21:15 [Buildroot] [PATCH v6 0/5] Support building barebox with an auxiliary config Pieter Smith
2016-04-24 21:15 ` [Buildroot] [PATCH v6 1/3] barebox: prepare for auxiliarry build Pieter Smith
2016-05-01 12:34 ` Thomas Petazzoni
2016-05-01 20:49 ` Pieter Smith
2016-04-24 21:15 ` [Buildroot] [PATCH v6 2/3] barebox: support auxiliary config build Pieter Smith
2016-05-01 12:34 ` Thomas Petazzoni [this message]
2016-05-01 20:48 ` Pieter Smith
2016-04-24 21:15 ` [Buildroot] [PATCH v6 3/3] beaglebone: adds barebox bootloader defconfig Pieter Smith
2016-05-01 12:35 ` Thomas Petazzoni
2016-05-01 20:46 ` Pieter Smith
2016-04-24 21:21 ` [Buildroot] [PATCH v6 0/5] Support building barebox with an auxiliary config Thomas Petazzoni
2016-04-24 21:24 ` Pieter Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160501143440.68983c1e@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox