From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/5] freescale: genimage: Factorize scripts
Date: Sat, 16 Jul 2016 12:41:25 +0200 [thread overview]
Message-ID: <20160716124125.7ed46855@free-electrons.com> (raw)
In-Reply-To: <20160709064004.8844-2-savoundg@gmail.com>
Hello,
On Fri, 8 Jul 2016 23:40:00 -0700, Georges Savoundararadj wrote:
> For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco:
> * Replace genimage.cfg with a common Freescale genimage template named
> genimage.cfg.template because they all use the same layout. The only
> difference comes from the device tree blobs.
> * Replace each post-image.sh script with a generic post-image.sh script
> which is able to generate the right genimage.cfg depending on:
> ** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
> ** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
> ** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
> * Fix the readme.txt files accordingly
>
> Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Peter, Yann, Fabio, could you have a look at this patch and let me know
what you think?
On one hand, yes the genimage.cfg files and post-image scripts for the
different freescale boards are very similar, so some factorization
seems to make sense.
On the other hand, the factorization implies a bit of additional
complexity, which is not that nice for defconfigs, that aim at being
simple.
What is your take on this factorization vs. complexity trade-off? I'm
keeping the full patch below so you can have a look.
Thanks,
Thomas
> ---
> .../genimage.cfg => common/genimage.cfg.template} | 13 ++--
> board/freescale/common/post-image.sh | 71 ++++++++++++++++++++++
> board/freescale/imx25pdk/post-image.sh | 16 -----
> board/freescale/imx25pdk/readme.txt | 2 +-
> board/freescale/imx51evk/genimage.cfg | 41 -------------
> board/freescale/imx51evk/post-image.sh | 16 -----
> board/freescale/imx51evk/readme.txt | 2 +-
> board/freescale/imx53loco/genimage.cfg | 42 -------------
> board/freescale/imx53loco/post-image.sh | 16 -----
> board/freescale/imx6ulevk/genimage.cfg | 41 -------------
> board/freescale/imx6ulevk/post-image.sh | 16 -----
> board/freescale/imx6ulevk/readme.txt | 2 +-
> board/freescale/imx7dsdb/genimage.cfg | 41 -------------
> board/freescale/imx7dsdb/post-image.sh | 16 -----
> board/freescale/imx7dsdb/readme.txt | 2 +-
> configs/freescale_imx6ulevk_defconfig | 2 +-
> configs/freescale_imx7dsabresd_defconfig | 2 +-
> configs/mx25pdk_defconfig | 2 +-
> configs/mx51evk_defconfig | 2 +-
> configs/mx53loco_defconfig | 2 +-
> 20 files changed, 86 insertions(+), 261 deletions(-)
> rename board/freescale/{imx25pdk/genimage.cfg => common/genimage.cfg.template} (58%)
> create mode 100755 board/freescale/common/post-image.sh
> delete mode 100755 board/freescale/imx25pdk/post-image.sh
> delete mode 100644 board/freescale/imx51evk/genimage.cfg
> delete mode 100755 board/freescale/imx51evk/post-image.sh
> delete mode 100644 board/freescale/imx53loco/genimage.cfg
> delete mode 100755 board/freescale/imx53loco/post-image.sh
> delete mode 100644 board/freescale/imx6ulevk/genimage.cfg
> delete mode 100755 board/freescale/imx6ulevk/post-image.sh
> delete mode 100644 board/freescale/imx7dsdb/genimage.cfg
> delete mode 100755 board/freescale/imx7dsdb/post-image.sh
>
> diff --git a/board/freescale/imx25pdk/genimage.cfg b/board/freescale/common/genimage.cfg.template
> similarity index 58%
> rename from board/freescale/imx25pdk/genimage.cfg
> rename to board/freescale/common/genimage.cfg.template
> index 9386e32..3adb12a 100644
> --- a/board/freescale/imx25pdk/genimage.cfg
> +++ b/board/freescale/common/genimage.cfg.template
> @@ -1,17 +1,16 @@
> -# Minimal SD card image for the Freescale's i.MX25 PDK board
> +# Minimal SD card image for the Freescale boards Template
> #
> -# We mimic the .sdcard Freescale's image format for i.MX25:
> +# We mimic the .sdcard Freescale's image format:
> # * the SD card must have 1 kB free space at the beginning,
> # * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> +# * a FAT partition at offset 8 MB is containing zImage/uImage and DTB files
> +# * a single root filesystem partition is required (ext2, ext3 or ext4)
> #
>
> image boot.vfat {
> vfat {
> files = {
> - "imx25-pdk.dtb",
> - "zImage"
> + %FILES%
> }
> }
> size = 16M
> @@ -36,6 +35,6 @@ image sdcard.img {
>
> partition rootfs {
> partition-type = 0x83
> - image = "rootfs.ext4"
> + image = %ROOTFS%
> }
> }
> diff --git a/board/freescale/common/post-image.sh b/board/freescale/common/post-image.sh
> new file mode 100755
> index 0000000..6b22cf2
> --- /dev/null
> +++ b/board/freescale/common/post-image.sh
> @@ -0,0 +1,71 @@
> +#!/usr/bin/env bash
> +
> +#
> +# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
> +# in ${BR_CONFIG}, then prints the corresponding list of file names for the
> +# genimage configuration file
> +#
> +dtb_list()
> +{
> + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
> +
> + for dt in $DTB_LIST; do
> + echo -n "\"$dt.dtb\", "
> + done
> +}
> +
> +#
> +# linux_image extracts the Linux image format from BR2_LINUX_KERNEL_UIMAGE in
> +# ${BR_CONFIG}, then prints the corresponding file name for the genimage
> +# configuration file
> +#
> +linux_image()
> +{
> + if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
> + echo "\"uImage\""
> + else
> + echo "\"zImage\""
> + fi
> +}
> +
> +#
> +# fstype extracts the type of the filesystem generated from BR_TARGET_ROOTFS_EXT2_*
> +# in ${BR_CONFIG}, then prints the extension
> +#
> +fstype()
> +{
> + if grep -Eq "^BR2_TARGET_ROOTFS_EXT2_4=y$" ${BR2_CONFIG}; then
> + echo "ext4"
> + elif grep -Eq "^BR2_TARGET_ROOTFS_EXT2_3=y$" ${BR2_CONFIG}; then
> + echo "ext3"
> + else
> + echo "ext2"
> + fi
> +}
> +
> +main()
> +{
> + local FILES="$(dtb_list) $(linux_image)"
> + local ROOTFS="\"rootfs.$(fstype)\""
> + local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
> + local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> +
> + sed -e "s/%FILES%/${FILES}/" \
> + -e "s/%ROOTFS%/${ROOTFS}/" \
> + board/freescale/common/genimage.cfg.template > ${GENIMAGE_CFG}
> +
> + rm -rf "${GENIMAGE_TMP}"
> +
> + genimage \
> + --rootpath "${TARGET_DIR}" \
> + --tmppath "${GENIMAGE_TMP}" \
> + --inputpath "${BINARIES_DIR}" \
> + --outputpath "${BINARIES_DIR}" \
> + --config "${GENIMAGE_CFG}"
> +
> + rm -f ${GENIMAGE_CFG}
> +
> + exit $?
> +}
> +
> +main $@
> diff --git a/board/freescale/imx25pdk/post-image.sh b/board/freescale/imx25pdk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx25pdk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx25pdk/readme.txt b/board/freescale/imx25pdk/readme.txt
> index a154b99..df7c617 100644
> --- a/board/freescale/imx25pdk/readme.txt
> +++ b/board/freescale/imx25pdk/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx25pdk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX25 PDK board
> =========================
> diff --git a/board/freescale/imx51evk/genimage.cfg b/board/freescale/imx51evk/genimage.cfg
> deleted file mode 100644
> index a44ed30..0000000
> --- a/board/freescale/imx51evk/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal SD card image for the Freescale's i.MX51 EVK board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX51:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx51-babbage.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx51evk/post-image.sh b/board/freescale/imx51evk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx51evk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx51evk/readme.txt b/board/freescale/imx51evk/readme.txt
> index 6639a92..bf739fd 100644
> --- a/board/freescale/imx51evk/readme.txt
> +++ b/board/freescale/imx51evk/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx51evk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX51 EVK board
> =========================
> diff --git a/board/freescale/imx53loco/genimage.cfg b/board/freescale/imx53loco/genimage.cfg
> deleted file mode 100644
> index b56c168..0000000
> --- a/board/freescale/imx53loco/genimage.cfg
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX53 QSB board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX53:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx53-qsb.dtb",
> - "imx53-qsrb.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx53loco/post-image.sh b/board/freescale/imx53loco/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx53loco/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx6ulevk/genimage.cfg b/board/freescale/imx6ulevk/genimage.cfg
> deleted file mode 100644
> index b58193a..0000000
> --- a/board/freescale/imx6ulevk/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX6UL EVK board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX6UL:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx6ul-14x14-evk.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx6ulevk/post-image.sh b/board/freescale/imx6ulevk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx6ulevk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx6ulevk/readme.txt b/board/freescale/imx6ulevk/readme.txt
> index 462715c..98de277 100644
> --- a/board/freescale/imx6ulevk/readme.txt
> +++ b/board/freescale/imx6ulevk/readme.txt
> @@ -43,7 +43,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx6ulevk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX6UL EVK board
> =========================
> diff --git a/board/freescale/imx7dsdb/genimage.cfg b/board/freescale/imx7dsdb/genimage.cfg
> deleted file mode 100644
> index aa6ae9e..0000000
> --- a/board/freescale/imx7dsdb/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX7D SDB board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX7D:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx7d-sdb.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx7dsdb/post-image.sh b/board/freescale/imx7dsdb/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx7dsdb/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx7dsdb/readme.txt b/board/freescale/imx7dsdb/readme.txt
> index c72e9a9..9aeeb16 100644
> --- a/board/freescale/imx7dsdb/readme.txt
> +++ b/board/freescale/imx7dsdb/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx7dsdb/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX7D SDB board
> =========================
> diff --git a/configs/freescale_imx6ulevk_defconfig b/configs/freescale_imx6ulevk_defconfig
> index 5a18c1d..fb860b5 100644
> --- a/configs/freescale_imx6ulevk_defconfig
> +++ b/configs/freescale_imx6ulevk_defconfig
> @@ -31,6 +31,6 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # filesystem / image
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx6ulevk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
> diff --git a/configs/freescale_imx7dsabresd_defconfig b/configs/freescale_imx7dsabresd_defconfig
> index 6768041..311f8ac 100644
> --- a/configs/freescale_imx7dsabresd_defconfig
> +++ b/configs/freescale_imx7dsabresd_defconfig
> @@ -33,4 +33,4 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
> BR2_PACKAGE_HOST_DOSFSTOOLS=y
> BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx7dsdb/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig
> index d682f0f..645fe8a 100644
> --- a/configs/mx25pdk_defconfig
> +++ b/configs/mx25pdk_defconfig
> @@ -14,7 +14,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx25pdk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
> diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
> index 0e2682a..aee4d6b 100644
> --- a/configs/mx51evk_defconfig
> +++ b/configs/mx51evk_defconfig
> @@ -17,7 +17,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx51evk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
> diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
> index 72389e4..b549bd2 100644
> --- a/configs/mx53loco_defconfig
> +++ b/configs/mx53loco_defconfig
> @@ -17,7 +17,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx53loco/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-07-16 10:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-09 6:39 [Buildroot] [PATCH 0/5] freescale: Factorize SD card generation scripts Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 1/5] freescale: genimage: Factorize scripts Georges Savoundararadj
2016-07-16 10:41 ` Thomas Petazzoni [this message]
2016-07-16 20:36 ` Fabio Estevam
2016-07-20 23:55 ` Fabio Estevam
2016-07-09 6:40 ` [Buildroot] [PATCH 2/5] freescale: genimage: Use the common genimage template Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 3/5] imx6sololiteevk: use " Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 4/5] imx6sololiteevk: use zImage Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 5/5] imx6dlsabresd: " Georges Savoundararadj
2016-09-07 22:29 ` [Buildroot] [PATCH v2 1/5] freescale: genimage: Factorize scripts Georges Savoundararadj
2016-09-07 22:29 ` [Buildroot] [PATCH v2 2/5] freescale: genimage: Use the common genimage template Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 3/5] imx6sololiteevk: use " Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 4/5] imx6sololiteevk: use zImage Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 5/5] imx6dlsabresd: " Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-11 21:27 ` [Buildroot] [PATCH v2 1/5] freescale: genimage: Factorize scripts Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160716124125.7ed46855@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox