From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Thu, 8 Sep 2016 22:28:07 +0200 Subject: [Buildroot] [PATCH v3] configs: Add support for warp7 board In-Reply-To: <1473351149-20025-1-git-send-email-fabio.estevam@nxp.com> References: <1473351149-20025-1-git-send-email-fabio.estevam@nxp.com> Message-ID: <20160908222807.254da1c3@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Thu, 8 Sep 2016 13:12:29 -0300, Fabio Estevam wrote: > Add support for warp7, which is a board based on NXP i.MX7S processor. > > More information about warp7 can be found at: > https://www.element14.com/community/docs/DOC-79058 > > Signed-off-by: Fabio Estevam I've applied, after doing a small change, see below. > +Create a bootable eMMC image > +============================ This section does not document how to create a bootable eMMC image (it's done by Buildroot), but rather how to flash it. So I've adjusted the title of this section accordingly. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com