From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Sun, 11 Sep 2016 21:29:09 +0200
Subject: [Buildroot] [Bug 9226] New: Firefly boot fails with: "failed to
 find part:boot"
In-Reply-To: <bug-9226-163@https.bugs.busybox.net/>
References: <bug-9226-163@https.bugs.busybox.net/>
Message-ID: <20160911212909.21c54943@free-electrons.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hello,

Ezequiel, you are the last person who updated the firefly defconfig, so
I assume you have access to the board. Could you have a look at the bug
report below?

Thanks!

Thomas

On Sun, 11 Sep 2016 15:19:57 +0000, bugzilla at busybox.net wrote:
> https://bugs.busybox.net/show_bug.cgi?id=9226
> 
>             Bug ID: 9226
>            Summary: Firefly boot fails with: "failed to find part:boot"
>            Product: buildroot
>            Version: 2016.05
>           Hardware: All
>                 OS: Linux
>             Status: NEW
>           Severity: normal
>           Priority: P5
>          Component: Other
>           Assignee: unassigned at buildroot.uclibc.org
>           Reporter: ciro.santilli at gmail.com
>                 CC: buildroot at uclibc.org
>   Target Milestone: ---
> 
> Tested on 2016.05 and master @ a26aa9686ad457d208df3b85a39c9befa04caaa3
> 
> Followed instructions under board/firefly/firefly-rk3288/readme.txt
> 
> Then from a TTL I see:
> 
>         arm pll = 600000000HZ
>         periph pll = 300000000HZ
>         ddr pll = 200000000HZ
>         codec pll = 594000000HZ
>     Board:  Rockchip platform Board
>     DRAM:  Found dram banks:1
>     Adding bank:0000000000000000(0000000080000000)
>     128 MiB
>     SDCard Update.
>     storage init OK!
>     Using default environment
> 
>     GetParam
>     W: Invalid Parameter's tag (0x7BD32A6C)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0xF07F8F7D)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0xAE8ED94E)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0x5EFFD968)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0xEDDF0B28)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0xE89DA830)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0x00000802)!
>     Invalid parameter
>     W: Invalid Parameter's tag (0x00000000)!
>     Invalid parameter
>     failed to find part:boot
>     failed to prepare fdt from boot!
>     failed to find part:resource
>     failed to prepare fdt from resource!
>     no adc node
>     can't find dts node for led
>     can't find dts node for ricoh619
>     can't find dts node for act8846
>     can't find dts node for rk808
>     can't find dts node for rk818
>     Can't find dts node for fuel guage cw201x
>     SecureBootEn = 0, SecureBootLock = 0
> 
>     #Boot ver: 0000-00-00#0.00
>     empty serial no.
>     unknown reboot type 1
>     no fuel gauge found
>     no fuel gauge found
>     read logo_on switch from dts [0]
>     no fuel gauge found
>     failed to find part:recovery
>     'recovery' does not seem to be a partition nor an address
>     Unable to boot:recovery
>     try to start backup
>     failed to find part:backup
>     'backup' does not seem to be a partition nor an address
>     Unable to boot:backup
>     try to start rockusb
> 
> but get no shell.
> 



-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com