From: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v4 11/22] toolchain-external-blackfin-uclinux: new package
Date: Mon, 7 Nov 2016 02:20:06 +0100 [thread overview]
Message-ID: <20161107012017.22505-12-arnout@mind.be> (raw)
In-Reply-To: <20161107012017.22505-1-arnout@mind.be>
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Analog Devices external toolchain
for the Blackfin architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
v4: add PREFIX definition, remove legacy implementation.
NOTE busybox build test failed when both FDPIC and FLAT shared libs
are installed, but this also fails on master. So not my problem :-P
---
toolchain/toolchain-external/Config.in | 26 ++++-------------
.../toolchain-external-blackfin-uclinux/Config.in | 17 +++++++++++
.../Config.in.options | 10 +++++++
.../toolchain-external-blackfin-uclinux.hash | 3 ++
.../toolchain-external-blackfin-uclinux.mk | 33 ++++++++++++++++++++++
.../toolchain-external/toolchain-external.hash | 4 ---
toolchain/toolchain-external/toolchain-external.mk | 16 -----------
7 files changed, 69 insertions(+), 40 deletions(-)
create mode 100644 toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in
create mode 100644 toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in.options
create mode 100644 toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.hash
create mode 100644 toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.mk
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index a19e41a..f8e04f5 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -22,6 +22,9 @@ source "toolchain/toolchain-external/toolchain-external-codesourcery-arm/Config.
# ARM big-endian
source "toolchain/toolchain-external/toolchain-external-linaro-armeb/Config.in"
+# Blackfin
+source "toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in"
+
config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A
bool "Arago ARMv7 2011.09"
depends on BR2_arm
@@ -397,24 +400,6 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86
Other architecture variants (beyond Pentium-4/Xeon) are
supported as well, but glibc is not optimised for it.
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
- bool "Blackfin.uclinux.org 2014R1"
- depends on BR2_bfin
- depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
- select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
- select BR2_INSTALL_LIBSTDCPP
- select BR2_TOOLCHAIN_HAS_NATIVE_RPC
- select BR2_USE_WCHAR
- select BR2_TOOLCHAIN_HAS_THREADS
- select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
- select BR2_HOSTARCH_NEEDS_IA32_LIBS
- select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
- select BR2_TOOLCHAIN_GCC_AT_LEAST_4_3
- select BR2_TOOLCHAIN_HAS_FORTRAN
- help
- Toolchain for the Blackfin architecture, from
- http://blackfin.uclinux.org.
-
config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
bool "Musl 1.1.12 toolchain"
depends on (BR2_arm && BR2_ARM_EABI && BR2_USE_MMU) || \
@@ -526,8 +511,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86
default "x86_64-amd-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64
- default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX && BR2_BINFMT_FLAT
- default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX && BR2_BINFMT_FDPIC
default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm && BR2_ARM_EABI
default "arm-linux-musleabihf" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm && BR2_ARM_EABIHF
default "mips-img-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
@@ -581,6 +564,9 @@ source "toolchain/toolchain-external/toolchain-external-codesourcery-arm/Config.
# ARM big-endian
source "toolchain/toolchain-external/toolchain-external-linaro-armeb/Config.in.options"
+# Blackfin
+source "toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in.options"
+
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
choice
diff --git a/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in
new file mode 100644
index 0000000..8b299e8
--- /dev/null
+++ b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in
@@ -0,0 +1,17 @@
+config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
+ bool "Blackfin.uclinux.org 2014R1"
+ depends on BR2_bfin
+ depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+ select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
+ select BR2_INSTALL_LIBSTDCPP
+ select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+ select BR2_USE_WCHAR
+ select BR2_TOOLCHAIN_HAS_THREADS
+ select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
+ select BR2_HOSTARCH_NEEDS_IA32_LIBS
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
+ select BR2_TOOLCHAIN_GCC_AT_LEAST_4_3
+ select BR2_TOOLCHAIN_HAS_FORTRAN
+ help
+ Toolchain for the Blackfin architecture, from
+ http://blackfin.uclinux.org.
diff --git a/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in.options b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in.options
new file mode 100644
index 0000000..3b7f457
--- /dev/null
+++ b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/Config.in.options
@@ -0,0 +1,10 @@
+if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
+
+config BR2_TOOLCHAIN_EXTERNAL_PREFIX
+ default "bfin-uclinux" if BR2_BINFMT_FLAT
+ default "bfin-linux-uclibc" if BR2_BINFMT_FDPIC
+
+config BR2_PACKAGE_PROVIDES_TOOLCHAIN_EXTERNAL
+ default "toolchain-external-blackfin-uclinux"
+
+endif
diff --git a/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.hash b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.hash
new file mode 100644
index 0000000..b320d94
--- /dev/null
+++ b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.hash
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 e424e90d8481d942a40266d78d1488726561fed3ec38403094f98055e61889d0 blackfin-toolchain-2014R1-RC2.i386.tar.bz2
+sha256 c65b1b4b918d5185349d62a3b7bf43b4b21e1175c52598ec047ca56b3f11d857 blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
diff --git a/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.mk b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.mk
new file mode 100644
index 0000000..0a48220
--- /dev/null
+++ b/toolchain/toolchain-external/toolchain-external-blackfin-uclinux/toolchain-external-blackfin-uclinux.mk
@@ -0,0 +1,33 @@
+################################################################################
+#
+# toolchain-external-blackfin-uclinux
+#
+################################################################################
+
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION_MAJOR = 2014R1
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION = $(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION_MAJOR)-RC2
+
+ifeq ($(BR2_BINFMT_FLAT),y)
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_SUBDIR = bfin-uclinux
+else
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_SUBDIR = bfin-linux-uclibc
+endif
+
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_SITE = http://downloads.sourceforge.net/project/adi-toolchain/$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION_MAJOR)/$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION)/i386
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_SOURCE = blackfin-toolchain-$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION).i386.tar.bz2
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_VERSION).i386.tar.bz2
+
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_STRIP_COMPONENTS = 3
+
+# Special handling for Blackfin toolchain, because of the split in two
+# tarballs, and the organization of tarball contents. The tarballs
+# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
+# which themselves contain the toolchain. This is why we strip more
+# components than usual.
+define TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_UCLIBC_EXTRA_EXTRACT
+ $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_EXTRA_DOWNLOADS) | \
+ $(TAR) --strip-components=3 -C $(@D) $(TAR_OPTIONS) -
+endef
+TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_UCLIBC_EXTRA_EXTRACT
+
+$(eval $(toolchain-external-package))
diff --git a/toolchain/toolchain-external/toolchain-external.hash b/toolchain/toolchain-external/toolchain-external.hash
index 3740ca4..16c2e19 100644
--- a/toolchain/toolchain-external/toolchain-external.hash
+++ b/toolchain/toolchain-external/toolchain-external.hash
@@ -1,10 +1,6 @@
######################################
# Next hashes are all locally computed
-# Blackfin toolchains from Analog Devices
-sha256 e424e90d8481d942a40266d78d1488726561fed3ec38403094f98055e61889d0 blackfin-toolchain-2014R1-RC2.i386.tar.bz2
-sha256 c65b1b4b918d5185349d62a3b7bf43b4b21e1175c52598ec047ca56b3f11d857 blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
-
# Mentor's Sourcery CodeBench Lite toolchains
# NiosII
sha256 750639290744adda931c81fa2cd2ffc2bde972488047824dcfaa53c42562191d sourceryg++-2016.05-10-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 7dfcac3..4b21b4f 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -70,16 +70,6 @@ define TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS
endef
endif
-# Special handling for Blackfin toolchain, because of the split in two
-# tarballs, and the organization of tarball contents. The tarballs
-# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
-# which themselves contain the toolchain. This is why we strip more
-# components than usual.
-define TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
- $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \
- $(TAR) --strip-components=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) -
-endef
-
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A),y)
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2
@@ -125,12 +115,6 @@ TOOLCHAIN_EXTERNAL_SOURCE = Codescape.GNU.Tools.Package.2016.05-03.for.MIPS.MTI.
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS
TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX),y)
-TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386
-TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 3
-TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
TOOLCHAIN_EXTERNAL_VERSION = 1.1.12
TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)
--
2.10.2
next prev parent reply other threads:[~2016-11-07 1:20 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 1:19 [Buildroot] [PATCH v4 00/22] Splitting the toolchain-external package Arnout Vandecappelle
2016-11-07 1:19 ` [Buildroot] [PATCH v4 01/22] Use already qstripped BR2_TOOLCHAIN_EXTERNAL_PREFIX everywhere Arnout Vandecappelle
2016-11-07 21:06 ` Romain Naour
2016-11-09 21:51 ` Thomas Petazzoni
2016-11-07 1:19 ` [Buildroot] [PATCH v4 02/22] toolchain-external: reorder the contents of toolchain-external.mk Arnout Vandecappelle
2016-11-07 21:26 ` Romain Naour
2016-11-07 1:19 ` [Buildroot] [PATCH v4 03/22] toolchain-external: move parts to pkg-toolchain-external.mk Arnout Vandecappelle
2016-11-07 21:34 ` Romain Naour
2016-11-07 1:19 ` [Buildroot] [PATCH v4 04/22] toolchain-external: introduce toolchain-external-package Arnout Vandecappelle
2016-11-07 22:16 ` Romain Naour
2016-11-08 1:00 ` Arnout Vandecappelle
2016-11-08 8:20 ` Thomas Petazzoni
2016-11-08 12:30 ` Arnout Vandecappelle
2016-11-08 15:38 ` Thomas Petazzoni
2016-11-08 20:53 ` Arnout Vandecappelle
2016-11-11 11:19 ` Arnout Vandecappelle
2016-11-07 1:20 ` [Buildroot] [PATCH v4 05/22] toolchain-external-linaro-aarch64: new package Arnout Vandecappelle
2016-11-07 22:23 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 06/22] toolchain-external-codesourcery-aarch64: " Arnout Vandecappelle
2016-11-07 22:25 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 07/22] toolchain-external-linaro-arm: " Arnout Vandecappelle
2016-11-07 22:26 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 08/22] toolchain-external-codesourcery-arm: " Arnout Vandecappelle
2016-11-07 22:28 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 09/22] toolchain-external-codesourcery-arm: Cortex-A12 and Cortex-A17 not supported Arnout Vandecappelle
2016-11-07 22:35 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 10/22] toolchain-external-linaro-armeb: new package Arnout Vandecappelle
2016-11-07 22:37 ` Romain Naour
2016-11-07 1:20 ` Arnout Vandecappelle [this message]
2016-11-07 22:42 ` [Buildroot] [PATCH v4 11/22] toolchain-external-blackfin-uclinux: " Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 12/22] toolchain-external-codesourcery-mips: " Arnout Vandecappelle
2016-11-07 22:43 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 13/22] toolchain-external-codescape-img-mips: " Arnout Vandecappelle
2016-11-22 21:20 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 14/22] toolchain-external-codescape-mti-mips: " Arnout Vandecappelle
2016-11-22 21:23 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 15/22] toolchain-external-codesourcery-niosII: " Arnout Vandecappelle
2016-11-22 21:30 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 16/22] toolchain-external-codesourcery-sh: " Arnout Vandecappelle
2016-11-22 21:32 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 17/22] toolchain-external-codesourcery-amd64: " Arnout Vandecappelle
2016-11-22 21:34 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 18/22] toolchain-external-codesourcery-x86: " Arnout Vandecappelle
2016-11-22 21:35 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 19/22] toolchain-external-musl-cross: " Arnout Vandecappelle
2016-11-22 21:40 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 20/22] toolchain-external-custom: " Arnout Vandecappelle
2016-11-22 21:49 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 21/22] toolchain-external-arc: " Arnout Vandecappelle
2016-11-22 21:51 ` Romain Naour
2016-11-07 1:20 ` [Buildroot] [PATCH v4 22/22] toolchain-external: remove Arago toolchains Arnout Vandecappelle
2016-11-07 22:49 ` Romain Naour
2016-11-07 9:39 ` [Buildroot] [PATCH v4 00/22] Splitting the toolchain-external package Romain NAOUR
2016-11-23 21:39 ` Thomas Petazzoni
2016-11-23 22:15 ` Romain Naour
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161107012017.22505-12-arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox