From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 27 Dec 2016 10:44:45 +0100 Subject: [Buildroot] BB-Black setup fails to boot using Buildroot Training Lab Book [December 26, 2016] In-Reply-To: <1482829391152-153506.post@n4.nabble.com> References: <1482829391152-153506.post@n4.nabble.com> Message-ID: <20161227104445.052db2dd@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Tue, 27 Dec 2016 01:03:11 -0800 (PST), Ashish_Kumar_Mishra wrote: > U-Boot 2016.03 (Dec 27 2016 - 12:45:34 +0530) > > Watchdog enabled > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Net: Could not get PHY for cpsw: addr 0 > cpsw, usb_ether > Press SPACE to abort autoboot in 1 seconds > reading uImage-dtb.am335x-boneblack > ** Unable to read file uImage-dtb.am335x-boneblack ** > Wrong Image Format for bootm command > ERROR: can't get kernel image! > => > > > Could group members please provide few pointers to get the proper board > booting . I suspect you forgot to put the uEnv.txt file on the SD card. Please read again the "Flash the system" section of the "Basic Buildroot usage" lab. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com