From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/4] board: raspberrypi: use regular kernel image
Date: Thu, 26 Jan 2017 22:25:17 +0100 [thread overview]
Message-ID: <20170126212517.GD3413@free.fr> (raw)
In-Reply-To: <50eb8d771ad78ed54338e29b393808d251366102.1485408968.git.baruch@tkos.co.il>
Baruch, All,
On 2017-01-26 07:36 +0200, Baruch Siach spake thusly:
> Since release 4.4 a kernel without a trailer is assumed to be device tree
> capable. Since our Raspberry Pi defconfigs all use the newer firmware we can
> just use the regular kernel image.
>
> https://www.raspberrypi.org/documentation/configuration/device-tree.md
>
> Tested on Raspberry Pi 3.
>
> Cc: Peter Seiderer <ps.report@gmx.net>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> board/raspberrypi/genimage-raspberrypi.cfg | 2 +-
> board/raspberrypi/genimage-raspberrypi0.cfg | 2 +-
> board/raspberrypi/genimage-raspberrypi2.cfg | 2 +-
> board/raspberrypi/genimage-raspberrypi3.cfg | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/board/raspberrypi/genimage-raspberrypi.cfg b/board/raspberrypi/genimage-raspberrypi.cfg
> index 74758f5e25b7..bd5166a0f313 100644
> --- a/board/raspberrypi/genimage-raspberrypi.cfg
> +++ b/board/raspberrypi/genimage-raspberrypi.cfg
> @@ -9,7 +9,7 @@ image boot.vfat {
> "rpi-firmware/config.txt",
> "rpi-firmware/fixup.dat",
> "rpi-firmware/start.elf",
> - "kernel-marked/zImage"
> + "zImage"
> }
> }
> size = 32M
> diff --git a/board/raspberrypi/genimage-raspberrypi0.cfg b/board/raspberrypi/genimage-raspberrypi0.cfg
> index a38840c829af..a9d4c4501fd9 100644
> --- a/board/raspberrypi/genimage-raspberrypi0.cfg
> +++ b/board/raspberrypi/genimage-raspberrypi0.cfg
> @@ -7,7 +7,7 @@ image boot.vfat {
> "rpi-firmware/config.txt",
> "rpi-firmware/fixup.dat",
> "rpi-firmware/start.elf",
> - "kernel-marked/zImage"
> + "zImage"
> }
> }
> size = 32M
> diff --git a/board/raspberrypi/genimage-raspberrypi2.cfg b/board/raspberrypi/genimage-raspberrypi2.cfg
> index 443c821872f5..a3be2a34426e 100644
> --- a/board/raspberrypi/genimage-raspberrypi2.cfg
> +++ b/board/raspberrypi/genimage-raspberrypi2.cfg
> @@ -7,7 +7,7 @@ image boot.vfat {
> "rpi-firmware/config.txt",
> "rpi-firmware/fixup.dat",
> "rpi-firmware/start.elf",
> - "kernel-marked/zImage"
> + "zImage"
> }
> }
> size = 32M
> diff --git a/board/raspberrypi/genimage-raspberrypi3.cfg b/board/raspberrypi/genimage-raspberrypi3.cfg
> index baab0c4cc108..3c9f1e5e2a22 100644
> --- a/board/raspberrypi/genimage-raspberrypi3.cfg
> +++ b/board/raspberrypi/genimage-raspberrypi3.cfg
> @@ -8,7 +8,7 @@ image boot.vfat {
> "rpi-firmware/fixup.dat",
> "rpi-firmware/start.elf",
> "rpi-firmware/overlays",
> - "kernel-marked/zImage"
> + "zImage"
> }
> }
> size = 32M
> --
> 2.11.0
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2017-01-26 21:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-26 5:36 [Buildroot] [PATCH 1/4] board: raspberrypi: use regular kernel image Baruch Siach
2017-01-26 5:36 ` [Buildroot] [PATCH 2/4] board: raspberrypi: don't generate a marked kernel Baruch Siach
2017-01-26 21:25 ` Yann E. MORIN
2017-01-26 5:36 ` [Buildroot] [PATCH 3/4] rpi-firmware: remove mkknlimg Baruch Siach
2017-01-26 21:25 ` Yann E. MORIN
2017-01-26 5:36 ` [Buildroot] [PATCH 4/4] board: raspberrypi: mention the Zero model in readme.txt Baruch Siach
2017-01-26 20:10 ` Yann E. MORIN
2017-01-26 21:25 ` Yann E. MORIN [this message]
2017-01-26 21:44 ` [Buildroot] [PATCH 1/4] board: raspberrypi: use regular kernel image Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170126212517.GD3413@free.fr \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox