From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 5 Mar 2017 22:31:58 +0100 Subject: [Buildroot] [PATCH v2 2/2] u-boot: add support for full image socfpga mkpimage In-Reply-To: <20170213153329.1770-1-lionel@svkt.org> References: <20170213135934.32014-2-lionel@svkt.org> <20170213153329.1770-1-lionel@svkt.org> Message-ID: <20170305223158.5580290a@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Mon, 13 Feb 2017 16:33:29 +0100, Lionel Flandrin wrote: > Previously only SPL packaging was supported, now we can also wrap the > u-boot-dtb.bin if enabled. > > Signed-off-by: Lionel Flandrin I've extended the commit log quite a bit to explain what is going on. > + If BR2_TARGET_UBOOT_SPL is enabled then BR2_TARGET_UBOOT_SPL_NAME is > + converted by mkpimage using header version 0. > + > + Otherwise the full u-boot-dtb.bin is converted using mkpimage header > + version 1. > + > + In either case the resulting file will be given a .crc extension. These paragraphs were a bit too wide, so I rewrapped them. Also, could you provide a configuration to test the build of the header version 0 situation, and another to test the build of the header version 1 situation ? I'm not familiar enough with the various SoCFPGA SoCs/boards to know which one is in which situation. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com