From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 7 Apr 2017 10:19:10 +0200 Subject: [Buildroot] Qt5 build failure (beaglebone_qt5_defconfig) In-Reply-To: <20170407080909.GB12962@panicking> References: <87f293c7-8aef-14e9-23e4-195a16b564e3@mind.be> <20170406183218.66cab07e@free-electrons.com> <20170406185739.3caf46f6@free-electrons.com> <20170407075444.GA12962@panicking> <20170407100654.32f1da84@free-electrons.com> <20170407080909.GB12962@panicking> Message-ID: <20170407101910.57e2a19d@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Fri, 7 Apr 2017 10:09:11 +0200, Michael Trimarchi wrote: > > > diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk > > > index 1d464d967..edfc27fa7 100644 > > > --- a/boot/uboot/uboot.mk > > > +++ b/boot/uboot/uboot.mk > > > @@ -195,8 +195,9 @@ endef > > > endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY > > > > > > define UBOOT_BUILD_CMDS > > > - $(if $(BR2_TARGET_UBOOT_CUSTOM_DTS_PATH), > > > - cp -f $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_DTS_PATH)) $(@D)/arch/$(UBOOT_ARCH)/dts/ > > > + UBOOT_CUSTOM_DTS_PATH=$(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_DTS_PATH)) > > > + $(if $(UBOOT_CUSTOM_DTS_PATH), > > > + cp -f $(UBOOT_CUSTOM_DTS_PATH) $(@D)/arch/$(UBOOT_ARCH)/dts/ > > > ) > > My error was cp -f with just one parameter. Test pass and cp -f fail Ah, yes, obviously. Though it would be nicer to define UBOOT_CUSTOM_DTS_PATH outside of UBOOT_BUILD_CMDS. Could you send a separate patch, fixing just that? Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com