From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sat, 13 May 2017 15:39:45 +0200 Subject: [Buildroot] Analysis of build results for 2017-05-12 In-Reply-To: <20170513063125.BA761220BB@mail.free-electrons.com> References: <20170513063125.BA761220BB@mail.free-electrons.com> Message-ID: <20170513153945.1170491c@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, Fabrice, Alexey, Bernd, Vicente, Peter, there are some questions/comments for you below. Thanks! On Sat, 13 May 2017 08:31:25 +0200 (CEST), Thomas Petazzoni wrote: > successes : 232 > failures : 22 Still not bad, but let's try to do better! On 22 failures, 13 failures have already been resolved, which leaves 9 failures to be investigated. > x86_64 | domoticz-3.5877 | NOK | http://autobuild.buildroot.net/results/3c35110f53601bce09028249f9a069934f05782a | Seems like a C++11 related issue. Fabrice, could you have a look ? > m68k | ffmpeg-3.3 | NOK | http://autobuild.buildroot.net/results/66b48ed9ab5c816cf5b2a50133c0ecbec1be7e54 | Still the coldfire/ffmpeg issue. There are some patches pending, but I'm not sure they are the best/correct solution. > arc | libcdio-0.94 | NOK | http://autobuild.buildroot.net/results/e837737abaea851bea428a35ea9d3395a6565c54 | > arc | libcdio-0.94 | NOK | http://autobuild.buildroot.net/results/1dab93aff5555f092ff30674ec0b35301ce62411 | > arc | libcdio-0.94 | NOK | http://autobuild.buildroot.net/results/90f0899f158af53dfa62ba20a46276e72d2facfd | Alexey, this still happens with the latest ARC toolchain components (I tested here). Since it has been happening for a while with no fix, I've disabled libcdio on ARC for the moment: https://git.buildroot.org/buildroot/commit/?id=459f7302df8cdc45aa0f7f2581ebb6f05fb6432a > x86_64 | libcec-4.0.2 | NOK | http://autobuild.buildroot.net/results/643f200d63f1505f8a44eae82a00572c1ee2bcaa | Another C++11 issue, quite similar to the one for domoticz it seems. Bernd, could you have a look? > i686 | mplayer-1.3.0 | NOK | http://autobuild.buildroot.net/results/7e6c45a56d09a61fe63bdb4ed807091f140045df | CC libavcodec/x86/blockdsp_init.o libavcodec/x86/ac3dsp_init.c: In function 'ac3_downmix_sse': libavcodec/x86/ac3dsp_init.c:161:9: error: can't find a register in class 'GENERAL_REGS' while reloading 'asm' libavcodec/x86/ac3dsp_init.c:165:9: error: can't find a register in class 'GENERAL_REGS' while reloading 'asm' Bernd, could you have a look? > sparc | openblas-f04af36ad0e85b64f1... | NOK | http://autobuild.buildroot.net/results/996e0b2872f7712db9e8ec6aa724fb373c578d43 | Architecture mismatch problem. Needs investigation. > i686 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/3932419d50af337230e58964238a3bb9e6c8ac15 | > i586 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/93fd12dd4deac0569f88ea18ee593159a218740f | > i686 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/f0beae1fe9825d5561e8f6b13ff318071b2a4629 | > arc | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/2f2bdfa62da64124a86401cadcfd300239042698 | > powerpc64 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/347d8fd2e286b3e4e5e18743e64d862bdb66dbb9 | > powerpc64 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/e54dc73660bc3e0edbe4bee6c54a10d6723c522d | > i586 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/ca7c9442a98bdc0eef7d5860f99f7b3f6e1df18b | > aarch64 | opencv3-3.2.0 | NOK | http://autobuild.buildroot.net/results/0a5c2f06dd447801efc9378b09dd31bb3399cf77 | I believe most, if not all of these have been fixed by: https://git.buildroot.org/buildroot/commit/?id=b6ea64aec80d50b840881bc89d4a2a1102b49d7e > arm | qt-4.8.7 | NOK | http://autobuild.buildroot.net/results/6756c1e49da27aa5af8e42a69e908380a91235bf | ORPH A static linking configuration, but Qt tries to uses libltdl. Peter (Seiderer) could you have a look? > mipsel | qt5webkit-5.8.0 | NOK | http://autobuild.buildroot.net/results/5f6aa282d19019a078ad0b3aec112eb4f05e8799 | {standard input}: Assembler messages: {standard input}:708: Error: opcode not supported on this processor: mips32r6 (mips32r6) `movz $v0,$t8,$t7' {standard input}:759: Error: opcode not supported on this processor: mips32r6 (mips32r6) `movz $v1,$t8,$t7' Vicente, since this is MIPS stuff, could you have a look? Webkit not suitable for mips32r6 ? > arm | rabbitmq-c-v0.8.0 | NOK | http://autobuild.buildroot.net/results/fe6f800c292633e4cf296a23c614b6379f8be42f | > m68k | rabbitmq-c-v0.8.0 | NOK | http://autobuild.buildroot.net/results/27695ec6b216acc379f31b24fd2777ae8d85aba0 | Static linking issues, again and again. > nios2 | uclibc-ng-test-c9b9876cefc1... | NOK | http://autobuild.buildroot.net/results/d61c8d169fc070271114a515159650f7a0f333c0 | > arm | uclibc-ng-test-c9b9876cefc1... | NOK | http://autobuild.buildroot.net/results/22295711046c519df44d5d976e0bfcae1f006e5a | Fixed by https://git.buildroot.org/buildroot/commit/?id=e7a64ddcbc0b262eaa549fede9bd1e8ca3bb310f. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com