From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Seiderer Date: Thu, 22 Jun 2017 22:29:00 +0200 Subject: [Buildroot] [PATCH v2] board: added support for Raspberry Pi Zero W In-Reply-To: <20170621224648.44373a00@windsurf> References: <1498077584-19344-1-git-send-email-yves.deweerdt.linux@gmail.com> <20170621224648.44373a00@windsurf> Message-ID: <20170622222900.6ec535ed@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Thomas, Yves, On Wed, 21 Jun 2017 22:46:48 +0200, Thomas Petazzoni wrote: > Hello, > > On Wed, 21 Jun 2017 22:39:44 +0200, Yves Deweerdt wrote: > > added a new config file for the Raspberry Pi Zero W (rpi0w) > > - added new folder for raspberrypi0w > > - included the overlays in the genimage config > > - add pi3-miniuart-bt overlay to the config > > - remove rpi0w device tree from the raspberrypi0_defconfig and genimage > > > > Signed-off-by: Yves Deweerdt > > I'd like a review/ack from Peter Seiderer, or other RPi folks of the > Buildroot community. I think the commit log should summarize why the > Zero W support is removed from raspberrypi0_defconfig, and why a > separate defconfig is needed. > The remaining difference between raspberrypi0_defconfig raspberrypi0w_defconfig wil be the usage of the pi3-miniuart-bt overlay. As there is no possibility to enable/disable this on demand I think this is enough to justify a second configuration (and keep the 'better' ttyAMA0 usage for serial console for the basic raspberrypi0)... Regards, Peter > > --- > > board/raspberrypi/genimage-raspberrypi0.cfg | 1 - > > board/raspberrypi/genimage-raspberrypi0w.cfg | 31 +++++++++++++++++++++++++ > > board/raspberrypi0w | 1 + > > configs/raspberrypi0_defconfig | 2 +- > > configs/raspberrypi0w_defconfig | 34 ++++++++++++++++++++++++++++ > > 5 files changed, 67 insertions(+), 2 deletions(-) > > create mode 100644 board/raspberrypi/genimage-raspberrypi0w.cfg > > create mode 120000 board/raspberrypi0w > > create mode 100644 configs/raspberrypi0w_defconfig > > An update to board/raspberrypi/readme.txt would be needed. > > Thanks, > > Thomas