From: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v4 06/36] Globally replace $(HOST_DIR)/usr/share with $(HOST_DIR)/share
Date: Wed, 5 Jul 2017 13:14:23 +0200 [thread overview]
Message-ID: <20170705111453.2284-7-arnout@mind.be> (raw)
In-Reply-To: <20170705111453.2284-1-arnout@mind.be>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
boot/syslinux/syslinux.mk | 2 +-
fs/iso9660/iso9660.mk | 2 +-
package/Makefile.in | 2 +-
package/autoconf-archive/autoconf-archive.mk | 2 +-
package/automake/automake.mk | 2 +-
package/gettext/gettext.mk | 2 +-
package/gutenprint/gutenprint.mk | 2 +-
package/libselinux/libselinux.mk | 4 ++--
package/libsemanage/libsemanage.mk | 2 +-
package/libsigrok/libsigrok.mk | 2 +-
package/libsvgtiny/libsvgtiny.mk | 2 +-
package/luarocks/luarocks.mk | 2 +-
package/luvi/luvi.mk | 2 +-
package/netsurf-buildsystem/netsurf-buildsystem.mk | 2 +-
package/python-cffi/python-cffi.mk | 2 +-
package/thrift/thrift.mk | 2 +-
package/ti-cgt-pru/ti-cgt-pru.mk | 4 ++--
package/tz/tz.mk | 6 +++---
package/tzdata/tzdata.mk | 6 +++---
19 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/boot/syslinux/syslinux.mk b/boot/syslinux/syslinux.mk
index 6eb2dd938d..13496414dd 100644
--- a/boot/syslinux/syslinux.mk
+++ b/boot/syslinux/syslinux.mk
@@ -97,7 +97,7 @@ define SYSLINUX_INSTALL_IMAGES_CMDS
$(INSTALL) -D -m 0755 $(@D)/$$i $(BINARIES_DIR)/syslinux/$${i##*/}; \
done
for i in $(SYSLINUX_C32); do \
- $(INSTALL) -D -m 0755 $(HOST_DIR)/usr/share/syslinux/$${i} \
+ $(INSTALL) -D -m 0755 $(HOST_DIR)/share/syslinux/$${i} \
$(BINARIES_DIR)/syslinux/$${i}; \
done
endef
diff --git a/fs/iso9660/iso9660.mk b/fs/iso9660/iso9660.mk
index fec6fe17c2..fafe5b0e84 100644
--- a/fs/iso9660/iso9660.mk
+++ b/fs/iso9660/iso9660.mk
@@ -70,7 +70,7 @@ ROOTFS_ISO9660_BOOT_IMAGE = isolinux/isolinux.bin
define ROOTFS_ISO9660_INSTALL_BOOTLOADER
$(INSTALL) -D -m 0644 $(BINARIES_DIR)/syslinux/* \
$(ROOTFS_ISO9660_TARGET_DIR)/isolinux/
- $(INSTALL) -D -m 0644 $(HOST_DIR)/usr/share/syslinux/ldlinux.c32 \
+ $(INSTALL) -D -m 0644 $(HOST_DIR)/share/syslinux/ldlinux.c32 \
$(ROOTFS_ISO9660_TARGET_DIR)/isolinux/ldlinux.c32
endef
endif
diff --git a/package/Makefile.in b/package/Makefile.in
index 113c89b81b..b95e5e3fa8 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -282,7 +282,7 @@ HOST_MAKE_ENV = \
PKG_CONFIG_SYSROOT_DIR="/" \
PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
- PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/usr/share/pkgconfig"
+ PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig"
HOST_CONFIGURE_OPTS = \
$(HOST_MAKE_ENV) \
diff --git a/package/autoconf-archive/autoconf-archive.mk b/package/autoconf-archive/autoconf-archive.mk
index 6a7ac4da38..8a6d59578e 100644
--- a/package/autoconf-archive/autoconf-archive.mk
+++ b/package/autoconf-archive/autoconf-archive.mk
@@ -9,6 +9,6 @@ AUTOCONF_ARCHIVE_SOURCE = autoconf-archive-$(AUTOCONF_ARCHIVE_VERSION).tar.xz
AUTOCONF_ARCHIVE_SITE = $(BR2_GNU_MIRROR)/autoconf-archive
AUTOCONF_ARCHIVE_LICENSE = GPL-3.0+ with exception
AUTOCONF_ARCHIVE_LICENSE_FILES = COPYING COPYING.EXCEPTION
-HOST_AUTOCONF_ARCHIVE_INSTALL_OPTS = aclocaldir=$(HOST_DIR)/usr/share/autoconf-archive install
+HOST_AUTOCONF_ARCHIVE_INSTALL_OPTS = aclocaldir=$(HOST_DIR)/share/autoconf-archive install
$(eval $(host-autotools-package))
diff --git a/package/automake/automake.mk b/package/automake/automake.mk
index 13041213bb..88c4fb3ee9 100644
--- a/package/automake/automake.mk
+++ b/package/automake/automake.mk
@@ -12,7 +12,7 @@ AUTOMAKE_LICENSE_FILES = COPYING
HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
-ACLOCAL_HOST_DIR = $(HOST_DIR)/usr/share/aclocal
+ACLOCAL_HOST_DIR = $(HOST_DIR)/share/aclocal
define GTK_DOC_M4_INSTALL
$(INSTALL) -D -m 0644 package/automake/gtk-doc.m4 \
diff --git a/package/gettext/gettext.mk b/package/gettext/gettext.mk
index 31f2459981..ec9588f8ad 100644
--- a/package/gettext/gettext.mk
+++ b/package/gettext/gettext.mk
@@ -89,7 +89,7 @@ HOST_GETTEXT_POST_INSTALL_HOOKS += HOST_GETTEXT_GETTEXTIZE_CONFIRMATION
# host, so do it manually
define HOST_GETTEXT_ADD_ABOUT_NLS
$(INSTALL) -m 0644 $(@D)/$(HOST_GETTEXT_SUBDIR)/ABOUT-NLS \
- $(HOST_DIR)/usr/share/gettext/ABOUT-NLS
+ $(HOST_DIR)/share/gettext/ABOUT-NLS
endef
HOST_GETTEXT_POST_INSTALL_HOOKS += HOST_GETTEXT_ADD_ABOUT_NLS
diff --git a/package/gutenprint/gutenprint.mk b/package/gutenprint/gutenprint.mk
index 2e0ff3d906..65b8d31091 100644
--- a/package/gutenprint/gutenprint.mk
+++ b/package/gutenprint/gutenprint.mk
@@ -84,7 +84,7 @@ HOST_GUTENPRINT_POST_BUILD_HOOKS += HOST_GUTENPRINT_POST_BUILD_INSTAL_TMP_HEADER
define GUTENPRINT_POST_INSTALL_TARGET_FIXUP
mkdir -p $(TARGET_DIR)/usr/share/gutenprint/5.2
- cp -rf $(HOST_DIR)/usr/share/gutenprint/5.2/xml $(TARGET_DIR)/usr/share/gutenprint/5.2
+ cp -rf $(HOST_DIR)/share/gutenprint/5.2/xml $(TARGET_DIR)/usr/share/gutenprint/5.2
endef
GUTENPRINT_POST_INSTALL_TARGET_HOOKS += GUTENPRINT_POST_INSTALL_TARGET_FIXUP
diff --git a/package/libselinux/libselinux.mk b/package/libselinux/libselinux.mk
index 3f2aa4cbfe..1698947184 100644
--- a/package/libselinux/libselinux.mk
+++ b/package/libselinux/libselinux.mk
@@ -36,7 +36,7 @@ endif
LIBSELINUX_MAKE_OPTS += \
PYINC="$(LIBSELINUX_PYINC)" \
PYSITEDIR=$(TARGET_DIR)/usr/lib/$(LIBSELINUX_PYLIBVER)/site-packages \
- SWIG_LIB="$(HOST_DIR)/usr/share/swig/$(SWIG_VERSION)/"
+ SWIG_LIB="$(HOST_DIR)/share/swig/$(SWIG_VERSION)/"
LIBSELINUX_MAKE_INSTALL_TARGETS += install-pywrap
@@ -90,7 +90,7 @@ HOST_LIBSELINUX_MAKE_OPTS = \
LDFLAGS="$(HOST_LDFLAGS) -lpcre -lpthread" \
PYINC="$(HOST_LIBSELINUX_PYINC)" \
PYSITEDIR="$(HOST_DIR)/lib/$(HOST_LIBSELINUX_PYLIBVER)/site-packages" \
- SWIG_LIB="$(HOST_DIR)/usr/share/swig/$(SWIG_VERSION)/"
+ SWIG_LIB="$(HOST_DIR)/share/swig/$(SWIG_VERSION)/"
define HOST_LIBSELINUX_BUILD_CMDS
# DESTDIR is needed during the compile to compute library and
diff --git a/package/libsemanage/libsemanage.mk b/package/libsemanage/libsemanage.mk
index efeb1fcd20..5ef2d57e35 100644
--- a/package/libsemanage/libsemanage.mk
+++ b/package/libsemanage/libsemanage.mk
@@ -30,7 +30,7 @@ endef
HOST_LIBSEMANAGE_DEPENDENCIES = host-bison host-audit host-libsepol host-libselinux \
host-ustr host-bzip2 host-swig
HOST_LIBSEMANAGE_MAKE_OPTS += $(HOST_CONFIGURE_OPTS) \
- SWIG_LIB="$(HOST_DIR)/usr/share/swig/$(SWIG_VERSION)/"
+ SWIG_LIB="$(HOST_DIR)/share/swig/$(SWIG_VERSION)/"
ifeq ($(BR2_PACKAGE_PYTHON3),y)
HOST_LIBSEMANAGE_DEPENDENCIES += host-python3
diff --git a/package/libsigrok/libsigrok.mk b/package/libsigrok/libsigrok.mk
index fe7d6c40b8..ef7fab82bd 100644
--- a/package/libsigrok/libsigrok.mk
+++ b/package/libsigrok/libsigrok.mk
@@ -39,7 +39,7 @@ endif
ifeq ($(BR2_PACKAGE_LIBSIGROKCXX),y)
LIBSIGROK_CONF_OPTS += --enable-cxx
-LIBSIGROK_AUTORECONF_OPTS += -I $(HOST_DIR)/usr/share/autoconf-archive
+LIBSIGROK_AUTORECONF_OPTS += -I $(HOST_DIR)/share/autoconf-archive
LIBSIGROK_DEPENDENCIES += \
host-autoconf-archive \
glibmm \
diff --git a/package/libsvgtiny/libsvgtiny.mk b/package/libsvgtiny/libsvgtiny.mk
index acd08d72d5..febd3fcec8 100644
--- a/package/libsvgtiny/libsvgtiny.mk
+++ b/package/libsvgtiny/libsvgtiny.mk
@@ -23,7 +23,7 @@ LIBSVGTINY_COMPONENT_TYPE = lib-static
endif
define LIBSVGTINY_CONFIGURE_CMDS
- ln -sf $(HOST_DIR)/usr/share/netsurf-buildsystem $(@D)/build
+ ln -sf $(HOST_DIR)/share/netsurf-buildsystem $(@D)/build
endef
define LIBSVGTINY_BUILD_CMDS
diff --git a/package/luarocks/luarocks.mk b/package/luarocks/luarocks.mk
index cf449ac52c..e965ab2288 100644
--- a/package/luarocks/luarocks.mk
+++ b/package/luarocks/luarocks.mk
@@ -53,7 +53,7 @@ endef
$(eval $(host-generic-package))
-LUAROCKS_RUN_ENV = LUA_PATH="$(HOST_DIR)/usr/share/lua/$(LUAINTERPRETER_ABIVER)/?.lua"
+LUAROCKS_RUN_ENV = LUA_PATH="$(HOST_DIR)/share/lua/$(LUAINTERPRETER_ABIVER)/?.lua"
LUAROCKS_RUN_CMD = $(LUA_RUN) $(HOST_DIR)/bin/luarocks
define LUAROCKS_FINALIZE_TARGET
diff --git a/package/luvi/luvi.mk b/package/luvi/luvi.mk
index 3b2094c4b9..956c37ffab 100644
--- a/package/luvi/luvi.mk
+++ b/package/luvi/luvi.mk
@@ -33,7 +33,7 @@ LUVI_CONF_OPTS = \
-DBUILD_SHARED_LIBS=OFF \
-DWithSharedLibluv=ON \
-DTARGET_ARCH=$(LUVI_TARGET_ARCH) \
- -DLUA_PATH=$(HOST_DIR)/usr/share/luajit-$(LUAJIT_VERSION)/?.lua
+ -DLUA_PATH=$(HOST_DIR)/share/luajit-$(LUAJIT_VERSION)/?.lua
# Add "rex" module (PCRE via bundled lrexlib)
ifeq ($(BR2_PACKAGE_PCRE),y)
diff --git a/package/netsurf-buildsystem/netsurf-buildsystem.mk b/package/netsurf-buildsystem/netsurf-buildsystem.mk
index f316eb126b..d4efec0e1d 100644
--- a/package/netsurf-buildsystem/netsurf-buildsystem.mk
+++ b/package/netsurf-buildsystem/netsurf-buildsystem.mk
@@ -10,7 +10,7 @@ NETSURF_BUILDSYSTEM_SITE_METHOD = git
NETSURF_BUILDSYSTEM_LICENSE = MIT, BSD-3-Clause (for llvm/* files)
NETSURF_BUILDSYSTEM_LICENSE_FILES = llvm/LICENSE.TXT
-NETSURF_BUILDSYSTEM_INSTALL_DIR = $(HOST_DIR)/usr/share/netsurf-buildsystem
+NETSURF_BUILDSYSTEM_INSTALL_DIR = $(HOST_DIR)/share/netsurf-buildsystem
define HOST_NETSURF_BUILDSYSTEM_INSTALL_CMDS
mkdir -p $(NETSURF_BUILDSYSTEM_INSTALL_DIR)
diff --git a/package/python-cffi/python-cffi.mk b/package/python-cffi/python-cffi.mk
index 723d87cb97..da95f7df08 100644
--- a/package/python-cffi/python-cffi.mk
+++ b/package/python-cffi/python-cffi.mk
@@ -20,7 +20,7 @@ HOST_PYTHON_CFFI_ENV = \
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
PKG_CONFIG_SYSROOT_DIR="/" \
- PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/usr/share/pkgconfig"
+ PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig"
HOST_PYTHON_CFFI_DEPENDENCIES = host-pkgconf host-python-pycparser host-libffi
$(eval $(python-package))
diff --git a/package/thrift/thrift.mk b/package/thrift/thrift.mk
index cbd5401dce..741d33f571 100644
--- a/package/thrift/thrift.mk
+++ b/package/thrift/thrift.mk
@@ -21,7 +21,7 @@ HOST_THRIFT_CONF_OPTS = --with-sysroot=$(HOST_DIR) \
--disable-tests \
--disable-tutorial
THRIFT_AUTORECONF = YES
-THRIFT_AUTORECONF_OPTS = -I $(HOST_DIR)/usr/share/autoconf-archive
+THRIFT_AUTORECONF_OPTS = -I $(HOST_DIR)/share/autoconf-archive
THRIFT_LICENSE = Apache-2.0
THRIFT_LICENSE_FILES = LICENSE
diff --git a/package/ti-cgt-pru/ti-cgt-pru.mk b/package/ti-cgt-pru/ti-cgt-pru.mk
index 4f8e70bfce..f923e835dc 100644
--- a/package/ti-cgt-pru/ti-cgt-pru.mk
+++ b/package/ti-cgt-pru/ti-cgt-pru.mk
@@ -20,10 +20,10 @@ define HOST_TI_CGT_PRU_EXTRACT_CMDS
endef
# Since this is largely prebuilt toolchain and likes to live in its
-# own directory, put it in $(HOST_DIR)/usr/share/ti-cgt-pru/.
+# own directory, put it in $(HOST_DIR)/share/ti-cgt-pru/.
# Packages wanting to use this toolchain need to use this path as TI's
# standard PRU_CGT path e.g. make PRU_CGT=$(TI_CGT_PRU_INSTALLDIR)...
-TI_CGT_PRU_INSTALLDIR = $(HOST_DIR)/usr/share/ti-cgt-pru
+TI_CGT_PRU_INSTALLDIR = $(HOST_DIR)/share/ti-cgt-pru
define HOST_TI_CGT_PRU_INSTALL_CMDS
mkdir -p $(TI_CGT_PRU_INSTALLDIR)
diff --git a/package/tz/tz.mk b/package/tz/tz.mk
index 7386361088..1e797046d2 100644
--- a/package/tz/tz.mk
+++ b/package/tz/tz.mk
@@ -10,7 +10,7 @@ TZ_LICENSE = Public domain
TZ_LOCALTIME = $(call qstrip,$(BR2_TARGET_LOCALTIME))
define TZ_BUILD_CMDS
- (cd $(HOST_DIR)/usr/share/zoneinfo/posix/; \
+ (cd $(HOST_DIR)/share/zoneinfo/posix/; \
for i in $$(find . -type f); do \
mkdir -p $(@D)/output/$$(dirname $$i); \
$(TZDUMP) -p . -q $${i#./} | sed '1d' > $(@D)/output/$$i; \
@@ -19,9 +19,9 @@ define TZ_BUILD_CMDS
endef
define TZ_INSTALL_TARGET_CMDS
- $(INSTALL) -D -m 0644 $(HOST_DIR)/usr/share/zoneinfo/zone.tab \
+ $(INSTALL) -D -m 0644 $(HOST_DIR)/share/zoneinfo/zone.tab \
$(TARGET_DIR)/usr/share/zoneinfo/zone.tab
- $(INSTALL) -D -m 0644 $(HOST_DIR)/usr/share/zoneinfo/iso3166.tab \
+ $(INSTALL) -D -m 0644 $(HOST_DIR)/share/zoneinfo/iso3166.tab \
$(TARGET_DIR)/usr/share/zoneinfo/iso3166.tab
mkdir -p $(TARGET_DIR)/usr/share/zoneinfo/uclibc
cp -a $(@D)/output/* $(TARGET_DIR)/usr/share/zoneinfo/uclibc
diff --git a/package/tzdata/tzdata.mk b/package/tzdata/tzdata.mk
index 8c8d224e4f..3b7f5c194b 100644
--- a/package/tzdata/tzdata.mk
+++ b/package/tzdata/tzdata.mk
@@ -31,7 +31,7 @@ TZDATA_EXTRACT_CMDS =
define TZDATA_INSTALL_TARGET_CMDS
$(INSTALL) -d -m 0755 $(TARGET_DIR)/usr/share/zoneinfo
- cp -a $(HOST_DIR)/usr/share/zoneinfo/* $(TARGET_DIR)/usr/share/zoneinfo
+ cp -a $(HOST_DIR)/share/zoneinfo/* $(TARGET_DIR)/usr/share/zoneinfo
cd $(TARGET_DIR)/usr/share/zoneinfo; \
for zone in posix/*; do \
ln -sfn "$${zone}" "$${zone##*/}"; \
@@ -55,8 +55,8 @@ define HOST_TZDATA_BUILD_CMDS
endef
define HOST_TZDATA_INSTALL_CMDS
- $(INSTALL) -d -m 0755 $(HOST_DIR)/usr/share/zoneinfo
- cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/usr/share/zoneinfo
+ $(INSTALL) -d -m 0755 $(HOST_DIR)/share/zoneinfo
+ cp -a $(@D)/_output/* $(@D)/*.tab $(HOST_DIR)/share/zoneinfo
endef
$(eval $(generic-package))
--
2.13.2
next prev parent reply other threads:[~2017-07-05 11:14 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 11:14 [Buildroot] [PATCH v4 00/36] Remove /usr component from HOST_DIR (continued) Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 01/36] generic packages: use $(HOST_DIR) instead of $(HOST_DIR)/usr as prefix Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 02/36] Globally replace $(HOST_DIR)/usr/bin with $(HOST_DIR)/bin Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 03/36] Globally replace $(HOST_DIR)/usr/sbin with $(HOST_DIR)/sbin Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 04/36] Globally replace $(HOST_DIR)/usr/lib with $(HOST_DIR)/lib Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 05/36] Globally replace $(HOST_DIR)/usr/include with $(HOST_DIR)/include Arnout Vandecappelle
2017-07-05 11:14 ` Arnout Vandecappelle [this message]
2017-07-05 11:14 ` [Buildroot] [PATCH v4 07/36] Globally replace $(HOST_DIR)/usr with $(HOST_DIR) Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 08/36] qt: fix up alignment after mechanical replacement Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 09/36] boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 10/36] chromebook snow: remove $(HOST_DIR)/usr reference from README Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 11/36] warpboard: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 12/36] stm32f429-disco: replace $HOST_DIR/usr with $HOST_DIR in flash script Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 13/36] stm32f469-disco: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 14/36] eclipse-register-toolchain: toolchain is no longer installed in $(HOST_DIR)/usr Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 15/36] manual: remove references to host/usr paths Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 16/36] grub2: remove host/usr reference from help text Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 17/36] lttng-tools: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 18/36] mfgtools: remove host/usr reference from readme.txt Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 19/36] lesstif: remove host/usr reference from .mk comment Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 20/36] board/gdb/bfin-bf512: remove host/usr reference from readme.txt Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 21/36] board/csky: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 22/36] libffi: avoid $(HOST_DIR)/usr while moving headers Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 23/36] genromfs: use $(HOST_DIR) instead of $(HOST_DIR)/usr as prefix Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 24/36] libcap: use $(HOST_DIR) as prefix instead of DESTDIR Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 25/36] lzip: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 26/36] opkg-utils: use $(HOST_DIR) as PREFIX " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 27/36] raspberrypi-usbboot: remove /usr from DESTDIR-based install commands Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 28/36] dos2unix: use prefix instead of DESTDIR for host installation Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 29/36] imx-uxb-loader: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 30/36] grub2: install in $(HOST_DIR) instead of $(HOST_DIR)/usr Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 31/36] sepolgen: strip /usr/ part from HOST_DIR Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 32/36] libsemanage: rework host installation Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 33/36] libselinux: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 34/36] checkpolicy: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 35/36] policycoreutils: " Arnout Vandecappelle
2017-07-05 11:14 ` [Buildroot] [PATCH v4 36/36] execline: remove --shebangdir configure option Arnout Vandecappelle
2017-07-05 14:31 ` [Buildroot] [PATCH v4 00/36] Remove /usr component from HOST_DIR (continued) Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170705111453.2284-7-arnout@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox