From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 5 Jul 2017 16:13:17 +0200 Subject: [Buildroot] [PATCH v6 10/10] package/qt5base: provide "qt.conf" to make "qmake" relocatable In-Reply-To: <51297962-b3bc-bd68-8dee-3a1ad8ca92ae@grandegger.com> References: <1499185359-8293-1-git-send-email-wg@grandegger.com> <1499185359-8293-11-git-send-email-wg@grandegger.com> <57657dbc-eca2-a352-ae7c-902a01c9ce73@grandegger.com> <51297962-b3bc-bd68-8dee-3a1ad8ca92ae@grandegger.com> Message-ID: <20170705161317.205dc3ae@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Wed, 5 Jul 2017 15:48:22 +0200, Wolfgang Grandegger wrote: > What about making the relocation stuff configurable as shown in the patch below. > The advantage is that it could also control the generation of the "qt.conf", > for example. We don't want to make it configurable, through a Config.in option. However, we would like to have a separate make target that prepares the SDK, creates the tarball, etc. Basically, a normal "make" would not run all the rpath sanitization logic, absolute path replacement, etc. There should be a separate "make sdk" target that does this. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com