From: "Antoine Ténart" <antoine.tenart@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH/next 4/5] solidrun/macchiatobin: add new board
Date: Tue, 14 Nov 2017 10:42:37 +0100 [thread overview]
Message-ID: <20171114094237.GA4995@kwain> (raw)
In-Reply-To: <20171114092024.juocxhwoaqd7xiql@bars>
Hi Sergey,
On Tue, Nov 14, 2017 at 12:20:24PM +0300, Sergey Matyukevich wrote:
>
> Thanks for detailed summary of mcbin networking support. However it sill looks
> like there is a missing piece here. I have checked behavior of both mainline 4.14
> (516fb7f2e73dcc) and marvell-mainline devel-4.14/all (a3d9036af3c6033). I did no
> changes to kernel/dts/defconfig at all other than enabling Marvell PHYs for mainline
> kernel. But the result is still the same: 1Gb eth2 interface works with devel-4.14/all,
> but doesn't work with mainline. Though PHY is recognized and attached, mii-diag also
> provides sane report. Tx packet counter in ifconfig is increased, but no packets
> on wire.
>
> Probably I am missing something obvious. I will do more checks and comparisons
> later this week. Setup is just the same: mainline U-Boot 2017.09 and images
> built using this patchset.
Note that I never tested with the upstream U-Boot. Do the interfaces
work in U-Boot?
Antoine
--
Antoine T?nart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2017-11-14 9:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-12 20:16 [Buildroot] [PATCH/next 0/5] Add support for MacchiatoBin board Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 1/5] armada-firmware: new package Sergey Matyukevich
2017-11-13 7:30 ` Baruch Siach
2017-11-13 19:47 ` Sergey Matyukevich
2017-11-14 22:07 ` Arnout Vandecappelle
2017-11-15 21:15 ` Sergey Matyukevich
2017-11-15 21:55 ` Arnout Vandecappelle
2017-11-12 20:16 ` [Buildroot] [PATCH/next 2/5] armada-ddr: " Sergey Matyukevich
2017-11-13 8:00 ` Baruch Siach
2017-11-13 20:12 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 3/5] atf: add support for Marvell Armada SoCs Sergey Matyukevich
2017-11-13 8:23 ` Baruch Siach
2017-11-13 20:10 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 4/5] solidrun/macchiatobin: add new board Sergey Matyukevich
2017-11-13 12:27 ` Baruch Siach
2017-11-13 12:51 ` Jan Kundrát
2017-11-13 13:13 ` Baruch Siach
2017-11-13 20:06 ` Sergey Matyukevich
2017-11-13 22:36 ` Thomas Petazzoni
2017-11-14 7:41 ` Antoine Ténart
2017-11-14 9:20 ` Sergey Matyukevich
2017-11-14 9:42 ` Antoine Ténart [this message]
2017-11-14 20:27 ` Sergey Matyukevich
2017-11-14 20:53 ` Antoine Ténart
2017-11-15 21:20 ` Sergey Matyukevich
2017-11-13 14:52 ` Baruch Siach
2017-11-13 19:51 ` Sergey Matyukevich
2017-11-14 19:11 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 5/5] Add myself to MacchiatoBin releated packages Sergey Matyukevich
2017-11-14 21:58 ` [Buildroot] [PATCH/next 0/5] Add support for MacchiatoBin board Arnout Vandecappelle
2017-11-15 15:59 ` Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171114094237.GA4995@kwain \
--to=antoine.tenart@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox