From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 8/8] support/testing: add tests for ATF
Date: Mon, 11 Dec 2017 14:00:57 +0100 [thread overview]
Message-ID: <20171211140057.6abfc914@windsurf> (raw)
In-Reply-To: <87o9n9yu6k.fsf@dell.be.48ers.dk>
Hello,
On Fri, 08 Dec 2017 19:02:27 +0100, Peter Korsgaard wrote:
> > These new tests only do build tests, but allow to quickly verify that
> > the ATF/U-Boot combinations for vexpress, Allwinner and Marvell
> > platforms all continue to build properly.
>
> We will presumably soon have defconfigs using each 3 variants, so I
> don't know how useful this is - But Ok, we can add it for now.
Yes, I also thought about this when writing the tests. The main
motivation for writing the tests is that they allowed me to test the
ATF package very quickly, by running 3 tests that are very focused on
building just ATF+U-Boot: they don't build a toolchain, a kernel, etc.
As such, such tests are much more usable for someone doing active
development on the ATF package and who wants to verify that things
continue to build properly.
And since I had them written, I thought I would submit them as well :)
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2017-12-11 13:00 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-03 21:48 [Buildroot] [PATCH 0/8] Improve ATF to support additional platforms Thomas Petazzoni
2017-12-03 21:48 ` [Buildroot] [PATCH 1/8] arm-trusted-firmware: add option to enable/disable building FIP image Thomas Petazzoni
2017-12-04 21:10 ` Sergey Matyukevich
2017-12-06 16:09 ` Danomi Manchego
2017-12-08 9:14 ` Peter Korsgaard
2017-12-08 12:34 ` Peter Korsgaard
2017-12-03 21:48 ` [Buildroot] [PATCH 2/8] arm-trusted-firmware: add BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 Thomas Petazzoni
2017-12-08 12:35 ` Peter Korsgaard
2017-12-03 21:48 ` [Buildroot] [PATCH 3/8] arm-trusted-firmware: allow to generate the BL31 image Thomas Petazzoni
2017-12-06 16:28 ` Jagan Teki
2017-12-08 12:35 ` Peter Korsgaard
2017-12-03 21:48 ` [Buildroot] [PATCH 4/8] uboot: add support for bundling ATF BL31 into U-Boot Thomas Petazzoni
2017-12-06 16:29 ` Jagan Teki
2017-12-08 12:37 ` Peter Korsgaard
2017-12-08 12:46 ` Thomas Petazzoni
2017-12-03 21:48 ` [Buildroot] [PATCH 5/8] mv-ddr-marvell: new package Thomas Petazzoni
2017-12-08 12:42 ` Peter Korsgaard
2017-12-08 13:18 ` Thomas Petazzoni
2017-12-03 21:48 ` [Buildroot] [PATCH 6/8] binaries-marvell: " Thomas Petazzoni
2017-12-04 20:17 ` Sergey Matyukevich
2017-12-03 21:48 ` [Buildroot] [PATCH 7/8] atf: add support for Marvell Armada SoCs Thomas Petazzoni
2017-12-08 17:59 ` Peter Korsgaard
2017-12-03 21:48 ` [Buildroot] [PATCH 8/8] support/testing: add tests for ATF Thomas Petazzoni
2017-12-04 20:33 ` Sergey Matyukevich
2017-12-08 18:02 ` Peter Korsgaard
2017-12-11 13:00 ` Thomas Petazzoni [this message]
2017-12-11 18:59 ` Peter Korsgaard
2017-12-06 16:26 ` [Buildroot] [PATCH 0/8] Improve ATF to support additional platforms Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171211140057.6abfc914@windsurf \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox