From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 14 Mar 2018 22:09:11 +0100 Subject: [Buildroot] [PATCH] package/libbsd: enable for non-glibc toolchains In-Reply-To: <20180314194356.15839-1-joerg.krause@embedded.rocks> References: <20180314194356.15839-1-joerg.krause@embedded.rocks> Message-ID: <20180314220911.12c69aba@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello J?rg, On Wed, 14 Mar 2018 20:43:56 +0100, J?rg Krause wrote: > libbsd builds now almost fine with a musl or uClibc toolchain, except > for one issue introduced in the latest version bump. Upstream commit > 22fbd62368c39de8ac5e249d1502d5ac0ffdef30 [1] uses the glibc-only macro > `__GLIBC_PREREQ`. The issue is fixed by the attached patch from upstream, > which fixes the use of `__GLIBC_PREREQ` on non-glibc toolchains. > > Backported from: > https://cgit.freedesktop.org/libbsd/patch/?id=1f8a3f7bccfc84b195218ad0086ebd57049c3490 > > netcat-openbsd is the only package selecting libbsd. However, building > it still needs a glibc toolchain, as it uses `b64_ntop` which is not > available in musl or uClibc. > > Build has been successfully tested with: > * armv7-eabihf--glibc--bleeding-edge-2017.11-1 > * armv7-eabihf--musl--bleeding-edge-2018.02-1 > * armv7-eabihf--uclibc--bleeding-edge-2018.02-1 > > [1] https://cgit.freedesktop.org/libbsd/commit/?id=22fbd62368c39de8ac5e249d1502d5ac0ffdef30 > > Signed-off-by: J?rg Krause > --- > ...n-declaration-protection-for-glibc-alread.patch | 80 ++++++++++++++++++++++ > package/libbsd/Config.in | 5 +- Does this allows to enable netcat-openbsd on uclibc and musl ? Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com