Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 2/4] linux: add custom linux logo
Date: Sat, 30 Jun 2018 22:51:13 +0200	[thread overview]
Message-ID: <20180630205113.GC23012@scaer> (raw)
In-Reply-To: <1527628939-7389-3-git-send-email-angelo@amarulasolutions.com>

Angelo, All,

On 2018-05-29 23:22 +0200, Angelo Compagnucci spake thusly:
> From: Angelo Compagnucci <angelo.compagnucci@gmail.com>
> 
> This patch adds a simple way to change the linux bootup logo.
> The patch was kept purposely simple to support only the use cause
> where a user needs a colour linux boot up logo.
> 
> Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

But I have a small comment though, see below...

> ---
>  linux/Config.in |  8 ++++++++
>  linux/linux.mk  | 15 +++++++++++++++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/linux/Config.in b/linux/Config.in
> index b1691fe..102bb22 100644
> --- a/linux/Config.in
> +++ b/linux/Config.in
> @@ -184,6 +184,14 @@ config BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES
>  	  A space-separated list of kernel configuration fragment files,
>  	  that will be merged to the main kernel configuration file.
>  
> +config BR2_LINUX_KERNEL_CUSTOM_LOGO_PATH
> +	string "Custom logo file path"
> +	help
> +	  Change the linux boot logo with your own graphics,
> +	  it can be used as an early bootsplash.o

I would add that support for framebuffer be enabled in the kernel
config.

> +	  Custom logo should be in png or jpg and it will be
> +	  converted to the linux kernel format (224 colors only).

I would also state that this replaces the existing logo file.

Regards,
Yann E. MORIN.

>  #
>  # Binary format
>  #
> diff --git a/linux/linux.mk b/linux/linux.mk
> index 6b5f534..6083756 100644
> --- a/linux/linux.mk
> +++ b/linux/linux.mk
> @@ -226,6 +226,18 @@ define LINUX_TRY_PATCH_TIMECONST
>  endef
>  LINUX_POST_PATCH_HOOKS += LINUX_TRY_PATCH_TIMECONST
>  
> +LINUX_KERNEL_CUSTOM_LOGO_PATH = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_LOGO_PATH))
> +ifneq ($(LINUX_KERNEL_CUSTOM_LOGO_PATH),)
> +LINUX_DEPENDENCIES += host-imagemagick
> +LINUX_KERNEL_CUSTOM_LOGO = y
> +define LINUX_KERNEL_CUSTOM_LOGO_CONVERT
> +	$(HOST_DIR)/usr/bin/convert $(LINUX_KERNEL_CUSTOM_LOGO_PATH) \
> +		-dither None -colors 224 -compress none \
> +		$(LINUX_DIR)/drivers/video/logo/logo_linux_clut224.ppm
> +endef
> +LINUX_PRE_BUILD_HOOKS += LINUX_KERNEL_CUSTOM_LOGO_CONVERT
> +endif
> +
>  ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
>  LINUX_KCONFIG_DEFCONFIG = $(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
>  else ifeq ($(BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG),y)
> @@ -325,6 +337,9 @@ define LINUX_KCONFIG_FIXUP_CMDS
>  		$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_APPENDED_DTB,$(@D)/.config))
>  	$(if $(BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV),
>  		$(call KCONFIG_DISABLE_OPT,CONFIG_MXC_GPU_VIV,$(@D)/.config))
> +	$(if $(LINUX_KERNEL_CUSTOM_LOGO),
> +		$(call KCONFIG_ENABLE_OPT,CONFIG_LOGO,$(@D)/.config)
> +		$(call KCONFIG_ENABLE_OPT,CONFIG_LOGO_LINUX_CLUT224,$(@D)/.config))
>  endef
>  
>  ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT),y)
> -- 
> 2.7.4
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2018-06-30 20:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 21:22 [Buildroot] [PATCH v3 0/4] Linux custom logo Angelo Compagnucci
2018-05-29 21:22 ` [Buildroot] [PATCH v3 1/4] package/imagemagick: add host package Angelo Compagnucci
2018-06-30 20:45   ` Yann E. MORIN
2018-05-29 21:22 ` [Buildroot] [PATCH v3 2/4] linux: add custom linux logo Angelo Compagnucci
2018-06-30 20:51   ` Yann E. MORIN [this message]
2018-05-29 21:22 ` [Buildroot] [PATCH v3 3/4] docs/images: adding default buildroot " Angelo Compagnucci
2018-06-30 20:58   ` Yann E. MORIN
2018-05-29 21:22 ` [Buildroot] [PATCH v3 4/4] configs: add linux boot logo to raspberrypi3 defconfig Angelo Compagnucci
2018-06-30 21:00   ` Yann E. MORIN
2018-07-02 23:13     ` Arnout Vandecappelle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180630205113.GC23012@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox