From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Wed, 18 Jul 2018 12:01:28 +0200 Subject: [Buildroot] [PATCH v2 2/2] configs/imx7d-sdb: Add new defconfig In-Reply-To: <1531084579-7949-2-git-send-email-festevam@gmail.com> References: <1531084579-7949-1-git-send-email-festevam@gmail.com> <1531084579-7949-2-git-send-email-festevam@gmail.com> Message-ID: <20180718120128.2454a930@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Sun, 8 Jul 2018 18:16:19 -0300, Fabio Estevam wrote: > Introduce imx7d-sdb_defconfig that allows booting imx7d-sdb > board using U-Boot and kernel mainline instead of the > vendor provided versions. > > Signed-off-by: Fabio Estevam > --- > Changes since v1: > - None This was lacking the update to the DEVELOPERS file and to the .gitlab-ci.yml file, so I fixed that and applied. Thanks! However, I find the naming a bit strange. If I understand correctly freescale_imx7dsabresd_defconfig and imx7d-sdb_defconfig are for the same board, the former using the vendor kernel, the latter using the mainline kernel. If that's the case, why isn't the defconfig having the same name, except for the freescale_ prefix ? Also, the board folder is named "imx7dsdb", which isn't very consistent. Could you clarify this and perhaps increase the consistency ? Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com