[Buildroot] [PATCH 0/5] Add Boundary Devices Nitrogen8M support

[Gary Bisson <gary.bisson@boundarydevices.com>]

Hi all,

This series adds support for our i.MX8MQ based Nitrogen8M platform.

Since this is our first ARM64 design, our boot scripts and post-build
script needed to be updated. Doing so, it became clear that it was time
to remove obsolete boot scripts so it is part of the series as well.

Also, the freescale imx8-bootloader-prepare script hardcoded the evk
device tree which means it could only be used for 1 board. Therefore it
was also modified to accept any device tree as a script argument (using
BR2_ROOTFS_POST_SCRIPT_ARGS), let me know if you are ok with this
approach.

Regards,
Gary

Gary Bisson (5):
  board/freescale/common/imx: make imx8-bootloader-prepare more generic
  board/boundarydevices: update post-build.sh for i.MX8MQ platforms
  board/boundarydevices: remove obsolete u-boot scripts
  board/boundarydevices: add i.MX8MQ support to u-boot scripts
  configs/nitrogen8m: Add new defconfig

 .../boundarydevices/common/6x_bootscript.txt  | 131 ------------------
 board/boundarydevices/common/6x_upgrade.txt   |  69 ---------
 board/boundarydevices/common/boot.cmd         |  40 +++---
 board/boundarydevices/common/post-build.sh    |  28 ++--
 board/boundarydevices/common/upgrade.cmd      |  69 ++++++++-
 .../common/imx/imx8-bootloader-prepare.sh     |  12 +-
 configs/nitrogen8m_defconfig                  |  54 ++++++++
 7 files changed, 161 insertions(+), 242 deletions(-)
 delete mode 100644 board/boundarydevices/common/6x_bootscript.txt
 delete mode 100644 board/boundarydevices/common/6x_upgrade.txt
 create mode 100644 configs/nitrogen8m_defconfig

-- 
2.18.0