Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH next v4 2/6] support/scripts/check-host-rpath: split condition on two statements
Date: Thu, 15 Nov 2018 21:58:30 +0100	[thread overview]
Message-ID: <20181115205830.GQ10271@scaer> (raw)
In-Reply-To: <20181114105557.12599-3-thomas.petazzoni@bootlin.com>

Thomas, All,

On 2018-11-14 11:55 +0100, Thomas Petazzoni spake thusly:
> Inside the check_elf_has_rpath(), we check if the host binary has a
> correct RPATH, which should be either an absolute path to
> $(HOST_DIR)/lib, or a relative path using $ORIGIN. Those two
> conditions are checked in a single statements, but as we are going to
> add a third condition, let's split this up a bit:
> 
>  - If we have a RPATH to $(HOST_DIR)/lib -> we're good, return 0
>  - If we have a RPATH to $ORIGIN/../lib -> we're good, return 0
>  - Otherwise, we will exit the loop, and return 1
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  support/scripts/check-host-rpath | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/support/scripts/check-host-rpath b/support/scripts/check-host-rpath
> index 169628decb..6c5767da05 100755
> --- a/support/scripts/check-host-rpath
> +++ b/support/scripts/check-host-rpath
> @@ -63,7 +63,8 @@ check_elf_has_rpath() {
>          for dir in ${rpath//:/ }; do
>              # Remove duplicate and trailing '/' for proper match
>              dir="$( sed -r -e 's:/+:/:g; s:/$::;' <<<"${dir}" )"
> -            [ "${dir}" = "${hostdir}/lib" -o "${dir}" = "\$ORIGIN/../lib" ] && return 0
> +            [ "${dir}" = "${hostdir}/lib" ] && return 0
> +            [ "${dir}" = "\$ORIGIN/../lib" ] && return 0
>          done
>      done < <( readelf -d "${file}"                                              \
>                |sed -r -e '/.* \(R(UN)?PATH\) +Library r(un)?path: \[(.+)\]$/!d' \
> -- 
> 2.19.1
> 

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2018-11-15 20:58 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-14 10:55 [Buildroot] [PATCH next v4 0/6] Per-package host/target directory support Thomas Petazzoni
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 1/6] Makefile: evaluate CCACHE and HOST{CC, CXX} at time of use Thomas Petazzoni
2018-11-15 20:49   ` Yann E. MORIN
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 2/6] support/scripts/check-host-rpath: split condition on two statements Thomas Petazzoni
2018-11-15 20:58   ` Yann E. MORIN [this message]
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 3/6] Makefile: rework main directory creation logic Thomas Petazzoni
2018-11-15 21:09   ` Yann E. MORIN
2018-11-16 14:08     ` Thomas Petazzoni
2018-11-16  1:21   ` Matthew Weber
2018-11-16 14:15     ` Thomas Petazzoni
2018-11-16 15:14       ` Thomas Petazzoni
2018-11-20 22:08         ` Matthew Weber
2018-11-27  6:24           ` Christian Stewart
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 4/6] Makefile: move .NOTPARALLEL statement after including .config file Thomas Petazzoni
2018-11-15 21:37   ` Yann E. MORIN
2018-11-16  8:53     ` Thomas Petazzoni
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 5/6] Makefile: define TARGET_DIR_WARNING_FILE relative to TARGET_DIR Thomas Petazzoni
2018-11-14 10:55 ` [Buildroot] [PATCH next v4 6/6] core: implement per-package SDK and target Thomas Petazzoni
2018-11-15 16:41   ` Andreas Naumann
2018-11-16 13:47     ` Thomas Petazzoni
2018-11-16 15:22       ` Thomas De Schampheleire
2018-11-16 19:57         ` Yann E. MORIN
2018-11-18 21:55           ` Arnout Vandecappelle
2018-11-19 10:48             ` Thomas Petazzoni
2018-11-19 14:27               ` Andreas Naumann
2018-11-19 19:49               ` Yann E. MORIN
2018-11-20 10:22                 ` Arnout Vandecappelle
2018-11-20 10:29                   ` Thomas Petazzoni
2018-11-20 16:18                     ` Thomas Petazzoni
2018-11-20 16:19               ` Thomas Petazzoni
2018-11-15 14:37 ` [Buildroot] [PATCH next v4 0/6] Per-package host/target directory support Thomas Petazzoni
2018-11-15 16:41 ` Andreas Naumann
2018-11-16 14:43   ` Thomas Petazzoni
2018-11-19 14:17     ` Andreas Naumann
2018-11-19 13:30 ` Arnout Vandecappelle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181115205830.GQ10271@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox