From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 16 Dec 2018 09:17:54 +0100 Subject: [Buildroot] [autobuild.buildroot.net] Your build results for 2018-12-14 In-Reply-To: <87zht69k2o.fsf@tkos.co.il> References: <20181215070019.5B30D20CE3@mail.bootlin.com> <87zht69k2o.fsf@tkos.co.il> Message-ID: <20181216091754.66bb0ec6@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Sun, 16 Dec 2018 06:22:55 +0200, Baruch Siach wrote: > > Makefile.legacy:9: *** "You have legacy configuration in your .config! > > Please check your configuration.". Stop. > > Makefile:84: recipe for target '_all' failed > > make: *** [_all] Error 2 > > This is most likely because of the BR2_TARGET_GENERIC_PASSWD_MD5 symbol > that has recently been added to Config.in.legacy. You can use the > defconfig instead. Here is what I usually do: > > wget -O .config http://autobuild.buildroot.net/results/71c46fac3bd30c7d30ac89ce43e411a9772665bb/defconfig > make olddefconfig Also, to reproduce a build failure, one can use the following script: http://git.buildroot.net/buildroot-test/plain/utils/br-reproduce-build Like this: ./br-reproduce-build 71c46fac3bd30c7d30ac89ce43e411a9772665bb It makes sure to checkout the right Buildroot commit, on which the build failure occurred. Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com