From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peter Seiderer <ps.report@gmx.net>
Date: Mon, 17 Dec 2018 08:16:50 +0100
Subject: [Buildroot] Wifi not working - raspberrypi3_defconfig
In-Reply-To: <e0a0f4c9-5769-702c-9945-fbcbf7643793@gmail.com>
References: <e0a0f4c9-5769-702c-9945-fbcbf7643793@gmail.com>
Message-ID: <20181217081650.3b16024c@gmx.net>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hello Ola,

On Sun, 16 Dec 2018 20:17:30 +0000, Ola Oni <oniola@gmail.com> wrote:

> Hi Martin,
> 
> I was advised to email you about my issue of not been able to get Wifi 
> working on raspberry pi 3 using buildroot 2018.11
> 
> Below are the entry in my two files [/etc/network/interfaces and 
> /etc/wpa_supplicant.conf]
> 
> # /etc/wpa_supplicant.conf <- filename
> ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=root
> ctrl_interface_group=0
> update_config=1
> 
>  ??? network={
>  ??????????? ssid="myssid"
>  ??????????? psk="mypassword"
>  ??????????? proto=WPA
>  ??????????? key_mgmt=WPA-PSK
>  ??????????? pairwise=CCMP
>  ??????????? auth_alg=OPEN
>  ??? }
> 
> ########################################
> # /etc/network/interfaces <- filename
> # interface file auto-generated by buildroot
> 
> auto lo
> iface lo inet loopback
> 
> auto eth0
> iface eth0 inet dhcp
>  ? pre-up /etc/network/nfs_check
>  ? wait-delay 15
>  ? hostname $(hostname)
> 
> auto wlan0
> iface wlan0 inet dhcp
>  ??????? wireless-essid "myssid"
>  ??????? wireless-key "mypassword"
>  ??????? pre-up wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
>  ??????? post-down killall -q wpa_supplicant
> 
> Attached to this is email is the output from dmesg.

Not much info, Wifi will definitely not work with raspberrypi3_defconfig
out of the box (e.g. package BR2_PACKAGE_WPA_SUPPLICANT not enabled)...

Regards,
Peter

> 
> Regards
> 
> onio
> 
> 
>