From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 22 Feb 2019 22:15:17 +0100 Subject: [Buildroot] [PATCH] configs/zynq_zybo: remove defconfig In-Reply-To: References: <20190222204442.4785-1-thomas.petazzoni@bootlin.com> Message-ID: <20190222221517.70b6a3b3@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Fri, 22 Feb 2019 13:54:11 -0700 James Hilliard wrote: > On Fri, Feb 22, 2019 at 1:44 PM Thomas Petazzoni > wrote: > > > > This defconfig was added in October 2016 and was never updated since > > then. It currently fails to build because U-Boot is too old and > > doesn't build with host-openssl in version 1.1.x. > You can probably just replace uboot with this version > https://github.com/Xilinx/u-boot-xlnx/tree/xilinx-v2018.3 for xilinx > devices like these. I'm pretty sure mainline U-Boot has support for this board, so it's not really the problem. The thing is that defconfigs are meant to be tested on real HW. Since I don't have this HW, and the original submitter didn't reply, there is not much I can do except suggesting to drop the defconfig. Either someone with the HW platform steps in, fixes the build issue and checks that the new U-Boot version runs OK on the HW, or we simply drop the defconfig. Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com