From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Seiderer Date: Thu, 25 Apr 2019 22:56:21 +0200 Subject: [Buildroot] [RFC v2 6/7] package/mesa3d: switch build system to meson In-Reply-To: <20190417214348.15685-6-romain.naour@smile.fr> References: <20190417214348.15685-1-romain.naour@smile.fr> <20190417214348.15685-6-romain.naour@smile.fr> Message-ID: <20190425225621.448aaaeb@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Bernd, Romain, On Wed, 17 Apr 2019 23:43:47 +0200, Romain Naour wrote: > From: Bernd Kuhls > > Add a new patch to remove host-python-mako dependency [1]. > > Update patches for meson: > 0002-configure.ac-invert-order-for-wayland-scanner-check.patch > 0003-set-LIBCLC_INCLUDEDIR.patch > > Disable unused options that are set to "auto" mode. > (valgrind, gallium-omx, power8). > > Remove --disable-static option since there is no meson equivalent. > Remove --disable-mangling since it's not yet supported by meson. > > Use r100 instead of radeon as DRI name for BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON. > > [1] http://patchwork.ozlabs.org/patch/1084248/ > > Signed-off-by: Bernd Kuhls > Signed-off-by: Romain Naour > --- > patch 0002-meson-use-generated-files-if-already-present-in-the-.patch may not work at 100%. > --- > ...vert-order-for-wayland-scanner-check.patch | 51 -------- > ...ted-files-if-already-present-in-the-.patch | 81 +++++++++++++ > ...t-proper-value-for-LIBCLC_INCLUDEDIR.patch | 39 ++++++ > .../mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch | 37 ------ > ...d-scanner-provided-by-wayland-scanne.patch | 52 ++++++++ > package/mesa3d/Config.in | 3 +- > package/mesa3d/mesa3d.mk | 113 ++++++++---------- > 7 files changed, 225 insertions(+), 151 deletions(-) > delete mode 100644 package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > create mode 100644 package/mesa3d/0002-meson-use-generated-files-if-already-present-in-the-.patch > create mode 100644 package/mesa3d/0003-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch > delete mode 100644 package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch > create mode 100644 package/mesa3d/0004-meson-use-wayland-scanner-provided-by-wayland-scanne.patch > > diff --git a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch b/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > deleted file mode 100644 > index 5135528795..0000000000 > --- a/package/mesa3d/0002-configure.ac-invert-order-for-wayland-scanner-check.patch > +++ /dev/null > @@ -1,51 +0,0 @@ > -From ef96bac7cbbb11b98606864ead0f731dd5b71d5a Mon Sep 17 00:00:00 2001 > -From: Gustavo Zacarias > -Date: Thu, 17 Nov 2016 15:36:54 -0300 > -Subject: [PATCH] configure.ac: invert order for wayland-scanner check > - > -When cross-compiling the .pc file might point to the wrong > -wayland-scanner binary (target rather than host) resulting in a > -non-executable and wrong scanner. > -Try searching the PATH first, and if that fails fall back into > -pkg-config. > - > -[Vincent: tweak patch for 17.1.1 version] > - > -Signed-off-by: Gustavo Zacarias > -Signed-off-by: Vicente Olivert Riera > -[Romain: rebase on 18.1] > -Signed-off-by: Romain Naour > -[Bernd rebase on 18.3] > -Signed-off-by: Bernd Kuhls > ---- > - configure.ac | 8 ++++---- > - 1 file changed, 4 insertions(+), 4 deletions(-) > - > -diff --git a/configure.ac b/configure.ac > -index f1fbdcc6c7..dcf87e7dd6 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -1841,17 +1841,16 @@ > - fi > - WAYLAND_PROTOCOLS_DATADIR=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols` > - > -- PKG_CHECK_MODULES([WAYLAND_SCANNER], [wayland-scanner], > -+ AC_PATH_PROG([WAYLAND_SCANNER], [wayland-scanner], [:]) > -+ if test "x$WAYLAND_SCANNER" = x; then > -+ PKG_CHECK_MODULES([WAYLAND_SCANNER], [wayland-scanner], > - WAYLAND_SCANNER=`$PKG_CONFIG --variable=wayland_scanner wayland-scanner`, > - WAYLAND_SCANNER='') > -+ fi > - PKG_CHECK_EXISTS([wayland-scanner >= 1.15], > - AC_SUBST(SCANNER_ARG, 'private-code'), > - AC_SUBST(SCANNER_ARG, 'code')) > - > -- if test "x$WAYLAND_SCANNER" = x; then > -- AC_PATH_PROG([WAYLAND_SCANNER], [wayland-scanner], [:]) > -- fi > -- > - if test "x$WAYLAND_SCANNER" = "x:"; then > - AC_MSG_ERROR([wayland-scanner is needed to compile the wayland platform]) > - fi > --- > -2.14.3 > diff --git a/package/mesa3d/0002-meson-use-generated-files-if-already-present-in-the-.patch b/package/mesa3d/0002-meson-use-generated-files-if-already-present-in-the-.patch > new file mode 100644 > index 0000000000..0350d07b08 > --- /dev/null > +++ b/package/mesa3d/0002-meson-use-generated-files-if-already-present-in-the-.patch > @@ -0,0 +1,81 @@ > +From 56a9b8964435e88ad869a149cc8f087eea7c4aa6 Mon Sep 17 00:00:00 2001 > +From: Romain Naour > +Date: Sun, 14 Apr 2019 19:57:25 +0200 > +Subject: [PATCH] meson: use generated files if already present in the release > + archive > + > +meson buildsystem behaviour doesn't is not the same as for autotools > +buildsystem about generated files. With autotools if a generated file > +exist it is not regenerated but with meson it is unconditionnaly > +generated. These files are provided as part of a release archive. > + > +Modify the custom_target using ir_expression_operation.py in order to > +use generated files present in the release archive. > + > +The python script ir_expression_operation.py used to build the header > +file ir_expression_operation_constant.h is using python mako module. > +This module must be installed in order to be able to build mesa from > +the git repository. > + > +Signed-off-by: Romain Naour > +--- > + meson.build | 8 +++++++- > + src/compiler/glsl/meson.build | 2 ++ > + src/compiler/meson.build | 1 + > + 3 files changed, 10 insertions(+), 1 deletion(-) > + > +diff --git a/meson.build b/meson.build > +index 53d02e31097..6c4f1508855 100644 > +--- a/meson.build > ++++ b/meson.build > +@@ -728,8 +728,14 @@ from distutils.version import StrictVersion > + import mako > + assert StrictVersion(mako.__version__) > StrictVersion("0.8.0") > + ''') > ++ > ++# Check if we build from a release archive that already contains pregenerated source files. > ++has_pregenerated_files = run_command('[', '-f', join_paths(meson.source_root(), 'src/mesa/main/format_unpack.c'), ']') > ++ > + if has_mako.returncode() != 0 > +- error('Python (3.x) mako module >= 0.8.0 required to build mesa.') > ++ if has_pregenerated_files.returncode() != 0 > ++ error('Python (3.x) mako module >= 0.8.0 required to build mesa.') > ++ endif > + endif > + > + if cc.get_id() == 'gcc' and cc.version().version_compare('< 4.4.6') > +diff --git a/src/compiler/glsl/meson.build b/src/compiler/glsl/meson.build > +index 8096f2d048e..3b3ec274785 100644 > +--- a/src/compiler/glsl/meson.build > ++++ b/src/compiler/glsl/meson.build > +@@ -43,6 +43,7 @@ ir_expression_operation_constant_h = custom_target( > + output : 'ir_expression_operation_constant.h', > + command : [prog_python, '@INPUT@', 'constant'], > + capture : true, > ++ build_always_stale : false, > + ) > + > + ir_expression_operation_strings_h = custom_target( > +@@ -51,6 +52,7 @@ ir_expression_operation_strings_h = custom_target( > + output : 'ir_expression_operation_strings.h', > + command : [prog_python, '@INPUT@', 'strings'], > + capture : true, > ++ build_always_stale : false, > + ) > + > + float64_glsl_h = custom_target( > +diff --git a/src/compiler/meson.build b/src/compiler/meson.build > +index 0f8f3c12966..ff254b65051 100644 > +--- a/src/compiler/meson.build > ++++ b/src/compiler/meson.build > +@@ -42,6 +42,7 @@ ir_expression_operation_h = custom_target( > + output : 'ir_expression_operation.h', > + command : [prog_python, '@INPUT@', 'enum'], > + capture : true, > ++ build_always_stale : false, > + ) > + > + libcompiler = static_library( > +-- > +2.20.1 > + > diff --git a/package/mesa3d/0003-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0003-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch > new file mode 100644 > index 0000000000..072d79a213 > --- /dev/null > +++ b/package/mesa3d/0003-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch > @@ -0,0 +1,39 @@ > +From 7b46756a99aca7f27a45c3b99460f088570f6f53 Mon Sep 17 00:00:00 2001 > +From: Romain Naour > +Date: Wed, 17 Apr 2019 23:07:42 +0200 > +Subject: [PATCH] meson: Set proper value for LIBCLC_INCLUDEDIR > + > +LIBCLC_INCLUDEDIR is the location where mesa3d OpenCL implementation > +will look for OpenCL "headers" on the target, when building the OpenCL > +kernels. > + > +The value returned by pkg-config for includedir is relevant when > +cross-compiling, on the build machine. But in this specific case, we > +really need a value that is valid on the target. > + > +Those headers are installed by the libclc package in /usr/share so > +that they are not removed by Buildroot target-finalize logic. > + > +Based on the patch for autotools provided by Valentin Korenblit. > + > +Signed-off-by: Romain Naour > +--- > + src/gallium/state_trackers/clover/meson.build | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/src/gallium/state_trackers/clover/meson.build b/src/gallium/state_trackers/clover/meson.build > +index 62ac5f5278d..ecdeb39669c 100644 > +--- a/src/gallium/state_trackers/clover/meson.build > ++++ b/src/gallium/state_trackers/clover/meson.build > +@@ -49,7 +49,7 @@ libclllvm = static_library( > + include_directories : clover_incs, > + cpp_args : [ > + cpp_vis_args, > +- '-DLIBCLC_INCLUDEDIR="@0@/"'.format(dep_clc.get_pkgconfig_variable('includedir')), > ++ '-DLIBCLC_INCLUDEDIR="/usr/share"', > + '-DLIBCLC_LIBEXECDIR="@0@/"'.format(dep_clc.get_pkgconfig_variable('libexecdir')), > + '-DCLANG_RESOURCE_DIR="@0@"'.format(join_paths( > + dep_llvm.get_configtool_variable('libdir'), 'clang', > +-- > +2.20.1 > + > diff --git a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch b/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch > deleted file mode 100644 > index 42ae826a36..0000000000 > --- a/package/mesa3d/0003-set-LIBCLC_INCLUDEDIR.patch > +++ /dev/null > @@ -1,37 +0,0 @@ > -From 94bceeb621e36f3188c6246a763def8695526578 Mon Sep 17 00:00:00 2001 > -From: Valentin Korenblit > -Date: Sat, 20 Oct 2018 10:56:23 +0200 > -Subject: [PATCH] Set proper value for LIBCLC_INCLUDEDIR > - > -LIBCLC_INCLUDEDIR is the location where mesa3d OpenCL implementation > -will look for OpenCL "headers" on the target, when building the OpenCL > -kernels. > - > -The value returned by pkg-config for includedir is relevant when > -cross-compiling, on the build machine. But in this specific case, we > -really need a value that is valid on the target. > - > -Those headers are installed by the libclc package in /usr/share so > -that they are not removed by Buildroot target-finalize logic. > - > -Signed-off-by: Valentin Korenblit > ---- > - configure.ac | 2 +- > - 1 file changed, 1 insertion(+), 1 deletion(-) > - > -diff --git a/configure.ac b/configure.ac > -index 864dcae..cc2390b 100644 > ---- a/configure.ac > -+++ b/configure.ac > -@@ -2429,7 +2429,7 @@ if test "x$enable_opencl" = xyes; then > - PKG_CONFIG_PATH environment variable. > - By default libclc.pc is installed to /usr/local/share/pkgconfig/]) > - else > -- LIBCLC_INCLUDEDIR=`$PKG_CONFIG --variable=includedir libclc` > -+ LIBCLC_INCLUDEDIR="/usr/share" > - LIBCLC_LIBEXECDIR=`$PKG_CONFIG --variable=libexecdir libclc` > - AC_SUBST([LIBCLC_INCLUDEDIR]) > - AC_SUBST([LIBCLC_LIBEXECDIR]) > --- > -2.7.4 > - > diff --git a/package/mesa3d/0004-meson-use-wayland-scanner-provided-by-wayland-scanne.patch b/package/mesa3d/0004-meson-use-wayland-scanner-provided-by-wayland-scanne.patch > new file mode 100644 > index 0000000000..784b27c4a2 > --- /dev/null > +++ b/package/mesa3d/0004-meson-use-wayland-scanner-provided-by-wayland-scanne.patch > @@ -0,0 +1,52 @@ > +From 0e107f7bac8d84d8fb2bb5b83bfb4474348a82c1 Mon Sep 17 00:00:00 2001 > +From: Romain Naour > +Date: Wed, 17 Apr 2019 22:47:05 +0200 > +Subject: [PATCH] meson: use wayland-scanner provided by wayland-scanner-path > + > +When cross-compiling the .pc file might point to the wrong > +wayland-scanner binary (target rather than host) resulting in a > +non-executable and wrong scanner. > +First try by using the path provided by wayland-scanner-path, > +and if that fails fall back into pkg-config. > + > +Based on the patch for autotools provided by Gustavo Zacarias. > + > +Signed-off-by: Romain Naour > +--- > + meson.build | 5 ++++- > + meson_options.txt | 6 ++++++ > + 2 files changed, 10 insertions(+), 1 deletion(-) > + > +diff --git a/meson.build b/meson.build > +index 6c4f1508855..ef0532b2cfb 100644 > +--- a/meson.build > ++++ b/meson.build > +@@ -1319,7 +1319,10 @@ endif > + > + if with_platform_wayland > + dep_wl_scanner = dependency('wayland-scanner', native: true) > +- prog_wl_scanner = find_program(dep_wl_scanner.get_pkgconfig_variable('wayland_scanner')) > ++ prog_wl_scanner = get_option('wayland-scanner-path') > ++ if prog_wl_scanner == '' > ++ prog_wl_scanner = find_program(dep_wl_scanner.get_pkgconfig_variable('wayland_scanner')) > ++ endif > + if dep_wl_scanner.version().version_compare('>= 1.15') > + wl_scanner_arg = 'private-code' > + else > +diff --git a/meson_options.txt b/meson_options.txt > +index ccf70659ff7..59ff8df8337 100644 > +--- a/meson_options.txt > ++++ b/meson_options.txt > +@@ -324,3 +324,9 @@ option( > + value : true, > + description : 'Enable direct rendering in GLX and EGL for DRI', > + ) > ++option( > ++ 'wayland-scanner-path', > ++ type : 'string', > ++ value : '', > ++ description : 'Locations to wayland-scanner binary. Default: use path from pkg-config' > ++) > +-- > +2.20.1 > + > diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in > index eba218efb2..df24acea21 100644 > --- a/package/mesa3d/Config.in > +++ b/package/mesa3d/Config.in > @@ -87,8 +87,7 @@ config BR2_PACKAGE_MESA3D_NEEDS_XA > bool > > # Quote from mesa3d meson.build: "kmsro driver requires one or more > -# renderonly drivers (vc4, etnaviv, freedreno)". But only vc4 support > -# is available by using the (deprecated) autotools build system. > +# renderonly drivers (vc4, etnaviv, freedreno)". > config BR2_PACKAGE_MESA3D_GALLIUM_KMSRO > bool > > diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk > index c8ca9a0d0f..5244545584 100644 > --- a/package/mesa3d/mesa3d.mk > +++ b/package/mesa3d/mesa3d.mk > @@ -25,27 +25,19 @@ MESA3D_DEPENDENCIES = \ > libdrm \ > zlib > > -# Disable assembly usage. > -MESA3D_CONF_OPTS = --disable-asm > - > -# autotools are deprecated in favour of meson, for now force autotools > -MESA3D_CONF_OPTS += --enable-autotools > - > -# Disable static, otherwise configure will fail with: "Cannot enable both static > -# and shared." > -ifeq ($(BR2_SHARED_STATIC_LIBS),y) > -MESA3D_CONF_OPTS += --disable-static > -endif > +MESA3D_CONF_OPTS = \ > + -Dasm=false \ > + -Dgallium-omx=disabled \ > + -Dpower8=false \ > + -Dvalgrind=false > > ifeq ($(BR2_PACKAGE_MESA3D_LLVM),y) > MESA3D_DEPENDENCIES += host-llvm llvm > -MESA3D_CONF_OPTS += \ > - --with-llvm-prefix=$(STAGING_DIR)/usr \ > - --enable-llvm-shared-libs \ > - --enable-llvm > +MESA3D_CONF_ENV += LLVM_CONFIG=$(STAGING_DIR)/usr/bin/llvm-config > +MESA3D_CONF_OPTS += -Dllvm=true > else > # Avoid automatic search of llvm-config > -MESA3D_CONF_OPTS += --disable-llvm > +MESA3D_CONF_OPTS += -Dllvm=false > endif > > # Disable opencl-icd: OpenCL lib will be named libOpenCL instead of > @@ -53,11 +45,9 @@ endif > ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y) > MESA3D_PROVIDES += libopencl > MESA3D_DEPENDENCIES += clang libclc > -MESA3D_CONF_OPTS += --enable-opencl \ > - --disable-opencl-icd \ > - --with-clang-libdir=$(STAGING_DIR)/usr/lib > +MESA3D_CONF_OPTS += -Dgallium-opencl=standalone > else > -MESA3D_CONF_OPTS += --disable-opencl > +MESA3D_CONF_OPTS += -Dgallium-opencl=disabled > endif > > ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS),y) > @@ -82,16 +72,17 @@ MESA3D_DEPENDENCIES += \ > xlib_libXxf86vm \ > xorgproto \ > libxcb > -MESA3D_CONF_OPTS += --enable-glx --disable-mangling > +# Disable-mangling not yet supported by meson build system. > +MESA3D_CONF_OPTS += -Dglx=auto > ifeq ($(BR2_PACKAGE_MESA3D_NEEDS_XA),y) > -MESA3D_CONF_OPTS += --enable-xa > +MESA3D_CONF_OPTS += -Dgallium-xa=true > else > -MESA3D_CONF_OPTS += --disable-xa > +MESA3D_CONF_OPTS += -Dgallium-xa=false > endif > else > MESA3D_CONF_OPTS += \ > - --disable-glx \ > - --disable-xa > + -Dglx=disabled \ > + -Dgallium-xa=false > endif > > # Drivers > @@ -111,63 +102,62 @@ MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I915) += i915 > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965) += i965 > MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU) += nouveau > -MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon > +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += r100 > # Vulkan Drivers > MESA3D_VULKAN_DRIVERS-$(BR2_PACKAGE_MESA3D_VULKAN_DRIVER_INTEL) += intel > > ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-gallium-drivers \ > - --disable-gallium-extra-hud > + -Dgallium-drivers= \ > + -Dgallium-extra-hud=false > else > MESA3D_CONF_OPTS += \ > - --enable-shared-glapi \ > - --with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ > - --enable-gallium-extra-hud > + -Dshared-glapi=true \ > + -Dgallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y)) \ > + -Dgallium-extra-hud=true > endif > > ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-dri-drivers --disable-dri3 > + -Ddri-drivers= -Ddri3=false > else > ifeq ($(BR2_PACKAGE_XLIB_LIBXSHMFENCE),y) > MESA3D_DEPENDENCIES += xlib_libxshmfence > -MESA3D_CONF_OPTS += --enable-dri3 > +MESA3D_CONF_OPTS += -Ddri3=true > else > -MESA3D_CONF_OPTS += --disable-dri3 > +MESA3D_CONF_OPTS += -Ddri3=false > endif > MESA3D_CONF_OPTS += \ > - --enable-shared-glapi \ > - --enable-driglx-direct \ > - --with-dri-driverdir=/usr/lib/dri \ > - --with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) > + -Dshared-glapi=true \ > + -Dglx-direct=true \ > + -Ddri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y)) > endif > > ifeq ($(BR2_PACKAGE_MESA3D_VULKAN_DRIVER),) > MESA3D_CONF_OPTS += \ > - --without-vulkan-drivers > + -Dvulkan-drivers= > else > MESA3D_DEPENDENCIES += xlib_libxshmfence > MESA3D_CONF_OPTS += \ > - --enable-dri3 \ > - --with-vulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) > + -Ddri3=true \ > + -Dvulkan-drivers=$(subst $(space),$(comma),$(MESA3D_VULKAN_DRIVERS-y)) > endif > > # APIs > > ifeq ($(BR2_PACKAGE_MESA3D_OSMESA_CLASSIC),y) > -MESA3D_CONF_OPTS += --enable-osmesa > +MESA3D_CONF_OPTS += -Dosmesa=classic > else > -MESA3D_CONF_OPTS += --disable-osmesa > +MESA3D_CONF_OPTS += -Dosmesa=none > endif > > # Always enable OpenGL: > -# - it is needed for GLES (mesa3d's ./configure is a bit weird) > -MESA3D_CONF_OPTS += --enable-opengl --enable-dri > +# - it is needed for GLES (mesa3d's meson.build is a bit weird) > +MESA3D_CONF_OPTS += -Dopengl=true -Dglx=dri > > # libva and mesa3d have a circular dependency > # we do not need libva support in mesa3d, therefore disable this option > -MESA3D_CONF_OPTS += --disable-va > +MESA3D_CONF_OPTS += -Dgallium-va=false > > # libGL is only provided for a full xorg stack > ifeq ($(BR2_PACKAGE_XORG7),y) > @@ -194,57 +184,58 @@ endif > ifeq ($(BR2_PACKAGE_WAYLAND),y) > MESA3D_DEPENDENCIES += wayland wayland-protocols > MESA3D_PLATFORMS += wayland > +MESA3D_CONF_OPTS += -Dwayland-scanner-path=$(HOST_DIR)/bin/wayland-scanner > endif > ifeq ($(BR2_PACKAGE_XORG7),y) > MESA3D_PLATFORMS += x11 > endif > > MESA3D_CONF_OPTS += \ > - --with-platforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) > + -Dplatforms=$(subst $(space),$(comma),$(MESA3D_PLATFORMS)) > > ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y) > MESA3D_PROVIDES += libegl > MESA3D_CONF_OPTS += \ > - --enable-gbm \ > - --enable-egl > + -Dgbm=true \ > + -Degl=true > else > MESA3D_CONF_OPTS += \ > - --disable-egl > + -Degl=true=false > endif > > ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y) > MESA3D_PROVIDES += libgles > -MESA3D_CONF_OPTS += --enable-gles1 --enable-gles2 > +MESA3D_CONF_OPTS += -Dgles1=true -Dgles2=true > else > -MESA3D_CONF_OPTS += --disable-gles1 --disable-gles2 > +MESA3D_CONF_OPTS += -Dgles1=false -Dgles2=false > endif > > ifeq ($(BR2_PACKAGE_MESA3D_XVMC),y) > MESA3D_DEPENDENCIES += xlib_libXvMC > -MESA3D_CONF_OPTS += --enable-xvmc > +MESA3D_CONF_OPTS += -Dgallium-xvmc=true > else > -MESA3D_CONF_OPTS += --disable-xvmc > +MESA3D_CONF_OPTS += -Dgallium-xvmc=false > endif > > ifeq ($(BR2_PACKAGE_LIBUNWIND),y) > -MESA3D_CONF_OPTS += --enable-libunwind > +MESA3D_CONF_OPTS += -Dlibunwind=true > MESA3D_DEPENDENCIES += libunwind > else > -MESA3D_CONF_OPTS += --disable-libunwind > +MESA3D_CONF_OPTS += -Dlibunwind=false > endif > > ifeq ($(BR2_PACKAGE_LIBVDPAU),y) > MESA3D_DEPENDENCIES += libvdpau > -MESA3D_CONF_OPTS += --enable-vdpau > +MESA3D_CONF_OPTS += -Dgallium-vdpau=true > else > -MESA3D_CONF_OPTS += --disable-vdpau > +MESA3D_CONF_OPTS += -Dgallium-vdpau=false > endif > > ifeq ($(BR2_PACKAGE_LM_SENSORS),y) > -MESA3D_CONF_OPTS += --enable-lmsensors > +MESA3D_CONF_OPTS += -Dlmsensors=true > MESA3D_DEPENDENCIES += lm-sensors > else > -MESA3D_CONF_OPTS += --disable-lmsensors > +MESA3D_CONF_OPTS += -Dlmsensors=false > endif > > -$(eval $(autotools-package)) > +$(eval $(meson-package)) Tested your patch series for i.mx6 (nitrogen6x_defconfig based), got the following configure failure (see defconfig below): [...] Host machine cpu family: arm Host machine cpu: cortex-a9 Target machine cpu family: arm Target machine cpu: cortex-a9 Build machine cpu family: x86_64 Build machine cpu: x86_64 meson.build:342:4: ERROR: Problem encountered: Cannot build GLX support without X11 platform support and at least one OpenGL API A full log can be found at .../build/mesa3d-19.0.2/build/meson-logs/meson-log.txt make[1]: *** [package/pkg-generic.mk:231: .../build/mesa3d-19.0.2/.stamp_configured] The configure failure could be 'fixed' by the following quick patch: diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk index 5244545584..773defbfa1 100644 --- a/package/mesa3d/mesa3d.mk +++ b/package/mesa3d/mesa3d.mk @@ -153,7 +153,7 @@ endif # Always enable OpenGL: # - it is needed for GLES (mesa3d's meson.build is a bit weird) -MESA3D_CONF_OPTS += -Dopengl=true -Dglx=dri +MESA3D_CONF_OPTS += -Dopengl=true # libva and mesa3d have a circular dependency # we do not need libva support in mesa3d, therefore disable this option With this patch applied the configure step succeeds, but the compile step fails with: [29/843] Generating vtn_gather_types.c with a custom command. FAILED: src/compiler/spirv/vtn_gather_types.c .../host/bin/python3 ../src/compiler/spirv/vtn_gather_types_c.py ../src/compiler/spirv/spirv.core.grammar.json src/compiler/spirv/vtn_gather_types.c Traceback (most recent call last): File "../src/compiler/spirv/vtn_gather_types_c.py", line 29, in from mako.template import Template ModuleNotFoundError: No module named 'mako' [30/843] Generating spirv_info.c with a custom command. FAILED: src/compiler/spirv/spirv_info.c .../host/bin/python3 ../src/compiler/spirv/spirv_info_c.py ../src/compiler/spirv/spirv.core.grammar.json src/compiler/spirv/spirv_info.c Traceback (most recent call last): File "../src/compiler/spirv/spirv_info_c.py", line 29, in from mako.template import Template ModuleNotFoundError: No module named 'mako' [35/843] Generating ir_expression_oper....h with a meson_exe.py custom command. FAILED: src/compiler/ir_expression_operation.h .../host/bin/meson --internal exe .../build/mesa3d-19.0.2/build/meson-private/meson_exe_python3_f99bf283dabcb83e5389be4bfb906240d67be6d7.dat Traceback (most recent call last): File "../src/compiler/glsl/ir_expression_operation.py", line 23, in import mako.template ModuleNotFoundError: No module named 'mako' [36/843] Generating nir_constant_expre....c with a meson_exe.py custom command. FAILED: src/compiler/nir/nir_constant_expressions.c .../host/bin/meson --internal exe .../build/mesa3d-19.0.2/build/meson-private/meson_exe_python3_16aba73c258f517db1423ca1fcbcc47a6f58541b.dat Traceback (most recent call last): File "../src/compiler/nir/nir_constant_expressions.py", line 424, in from mako.template import Template ModuleNotFoundError: No module named 'mako' [37/843] Generating nir_builder_opcodes.h with a meson_exe.py custom command. FAILED: src/compiler/nir/nir_builder_opcodes.h .../host/bin/meson --internal exe .../build/mesa3d-19.0.2/build/meson-private/meson_exe_python3_9519d8170e7bc8796b8caf294704c1ae9b9beb60.dat Traceback (most recent call last): File "../src/compiler/nir/nir_builder_opcodes_h.py", line 98, in from mako.template import Template ModuleNotFoundError: No module named 'mako' [38/843] Generating nir_opcodes.h with a meson_exe.py custom command. FAILED: src/compiler/nir/nir_opcodes.h .../host/bin/meson --internal exe .../build/mesa3d-19.0.2/build/meson-private/meson_exe_python3_7d8bc70fe02c4d6671c051c06b6c456b05bca90c.dat Traceback (most recent call last): File "../src/compiler/nir/nir_opcodes_h.py", line 45, in from mako.template import Template ModuleNotFoundError: No module named 'mako' [45/843] Generating format_srgb with a meson_exe.py custom command. ninja: build stopped: subcommand failed. make[1]: *** [package/pkg-generic.mk:241: .../build/mesa3d-19.0.2/.stamp_built] Error 1 Seems the patch 0002-meson-use-generated-files-if-already-present-in-the-.patch is not enough to prevent all python-mako based file generation calls... Regards, Peter BR2_arm=y BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_VFPV3=y BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y BR2_BINUTILS_VERSION_2_32_X=y BR2_GCC_VERSION_8_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/2aef1ef6.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="boundary" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-nit6xlite imx6dl-nitrogen6_vm imx6dl-nitrogen6x imx6q-nitrogen6x imx6dl-nitrogen6_som2 imx6q-nitrogen6_som2 imx6qp-nitrogen6_som2 imx6q-nitrogen6_max imx6qp-nitrogen6_max imx6q-sabrelite" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_PACKAGE_MESA3D=y BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_KMSRO=y BR2_PACKAGE_MESA3D_OPENGL_ES=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1530219d.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6q" BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_TARGET_UBOOT_BOOT_SCRIPT=y BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/boundarydevices/common/boot.cmd" BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_UBOOT_TOOLS=y