From: heiko.thiery at gmail.com <heiko.thiery@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 0/9] Add netopeer2 package (and dependencies)
Date: Fri, 11 Oct 2019 14:40:38 +0200 [thread overview]
Message-ID: <20191011124131.28246-1-heiko.thiery@gmail.com> (raw)
From: Heiko Thiery <heiko.thiery@kontron.com>
This patchset contains the netopeer2 package and the required
dependencies. Netopeer2 is a set of tools implementing network
configuration tools based on the NETCONF Protocol.
This includes the packages for libavl, libyang, libnetconf2, sysrepo,
netopeer2-server, netopeer2-cli, netopeer2-keystored.
Also add the host target support for libev and libssh. This is needed
for the install steps of sysrepo and netopeer2-server and
netopeer2-keystored.
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
---
Changes v1 -> v2:
- replace libredblack with libavl because this is also supported by
debian.
- changes all over the place to integrate review comments.
Changes v2 -> v3:
- download the netopeer2 sources only once for the packages
netopeer2-cli, netopeer2-keystored and netopeer2-server.
Use the same value in <pkg>_DL_SUBDIR and <pkg>_SOURCE for
all 3 packages.
- add sysv init scripts for netopeer-server, sysrepod and
syrepo-plugind.
- changes all over the place to integrate review comments.
Heiko Thiery (8):
package/libev: use host-autotools-package macro
package/libssh: use host-autotools-package macro
package/libyang: add package
package/libnetconf2: add package
package/sysrepo: add package
package/netopeer2-keystored: add package
package/netopeer2-server: add package
package/netopeer2-cli: add package
Michael Walle (1):
package/libavl: add package
DEVELOPERS | 11 +++
package/Config.in | 7 ++
package/libavl/0001-fix-makefile.patch | 49 ++++++++++
package/libavl/Config.in | 13 +++
package/libavl/libavl.hash | 5 ++
package/libavl/libavl.mk | 43 +++++++++
package/libev/libev.mk | 1 +
.../0001-Add-support-for-musl-libc.patch | 65 ++++++++++++++
package/libnetconf2/Config.in | 15 ++++
package/libnetconf2/libnetconf2.hash | 2 +
package/libnetconf2/libnetconf2.mk | 40 +++++++++
package/libssh/libssh.mk | 1 +
package/libyang/Config.in | 13 +++
package/libyang/libyang.hash | 2 +
package/libyang/libyang.mk | 25 ++++++
package/netopeer2-cli/Config.in | 21 +++++
package/netopeer2-cli/netopeer2-cli.hash | 1 +
package/netopeer2-cli/netopeer2-cli.mk | 17 ++++
package/netopeer2-keystored/Config.in | 17 ++++
.../netopeer2-keystored.hash | 2 +
.../netopeer2-keystored.mk | 32 +++++++
package/netopeer2-server/Config.in | 54 +++++++++++
package/netopeer2-server/S52netopeer2-server | 90 +++++++++++++++++++
.../netopeer2-server/netopeer2-server.hash | 1 +
package/netopeer2-server/netopeer2-server.mk | 33 +++++++
...espect-CMAKE_INSTALL_PREFIX-and-DEST.patch | 33 +++++++
...t-make-systemd-unit-dir-configurable.patch | 40 +++++++++
package/sysrepo/Config.in | 26 ++++++
package/sysrepo/S50sysrepod | 44 +++++++++
package/sysrepo/S51sysrepo-plugind | 49 ++++++++++
package/sysrepo/sysrepo.hash | 2 +
package/sysrepo/sysrepo.mk | 51 +++++++++++
32 files changed, 805 insertions(+)
create mode 100644 package/libavl/0001-fix-makefile.patch
create mode 100644 package/libavl/Config.in
create mode 100644 package/libavl/libavl.hash
create mode 100644 package/libavl/libavl.mk
create mode 100644 package/libnetconf2/0001-Add-support-for-musl-libc.patch
create mode 100644 package/libnetconf2/Config.in
create mode 100644 package/libnetconf2/libnetconf2.hash
create mode 100644 package/libnetconf2/libnetconf2.mk
create mode 100644 package/libyang/Config.in
create mode 100644 package/libyang/libyang.hash
create mode 100644 package/libyang/libyang.mk
create mode 100644 package/netopeer2-cli/Config.in
create mode 120000 package/netopeer2-cli/netopeer2-cli.hash
create mode 100644 package/netopeer2-cli/netopeer2-cli.mk
create mode 100644 package/netopeer2-keystored/Config.in
create mode 100644 package/netopeer2-keystored/netopeer2-keystored.hash
create mode 100644 package/netopeer2-keystored/netopeer2-keystored.mk
create mode 100644 package/netopeer2-server/Config.in
create mode 100644 package/netopeer2-server/S52netopeer2-server
create mode 120000 package/netopeer2-server/netopeer2-server.hash
create mode 100644 package/netopeer2-server/netopeer2-server.mk
create mode 100644 package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch
create mode 100644 package/sysrepo/0002-CMakeLists.txt-make-systemd-unit-dir-configurable.patch
create mode 100644 package/sysrepo/Config.in
create mode 100644 package/sysrepo/S50sysrepod
create mode 100644 package/sysrepo/S51sysrepo-plugind
create mode 100644 package/sysrepo/sysrepo.hash
create mode 100644 package/sysrepo/sysrepo.mk
--
2.20.1
next reply other threads:[~2019-10-11 12:40 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 12:40 heiko.thiery at gmail.com [this message]
2019-10-11 12:40 ` [Buildroot] [PATCH v3 1/9] package/libev: use host-autotools-package macro heiko.thiery at gmail.com
2019-10-11 12:40 ` [Buildroot] [PATCH v3 2/9] package/libssh: " heiko.thiery at gmail.com
2019-10-11 12:40 ` [Buildroot] [PATCH v3 3/9] package/libavl: add package heiko.thiery at gmail.com
2019-10-22 21:28 ` Thomas Petazzoni
2019-10-11 12:40 ` [Buildroot] [PATCH v3 4/9] package/libyang: " heiko.thiery at gmail.com
2019-10-22 21:30 ` Thomas Petazzoni
2019-10-11 12:40 ` [Buildroot] [PATCH v3 5/9] package/libnetconf2: " heiko.thiery at gmail.com
2019-10-22 21:33 ` Thomas Petazzoni
2019-10-11 12:40 ` [Buildroot] [PATCH v3 6/9] package/sysrepo: " heiko.thiery at gmail.com
2019-10-23 16:39 ` Michael Walle
2019-10-23 16:43 ` Heiko Thiery
2019-10-11 12:40 ` [Buildroot] [PATCH v3 7/9] package/netopeer2-keystored: " heiko.thiery at gmail.com
2019-10-11 12:40 ` [Buildroot] [PATCH v3 8/9] package/netopeer2-server: " heiko.thiery at gmail.com
2019-10-11 12:40 ` [Buildroot] [PATCH v3 9/9] package/netopeer2-cli: " heiko.thiery at gmail.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011124131.28246-1-heiko.thiery@gmail.com \
--to=heiko.thiery@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox