From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 8 Nov 2019 22:12:56 +0100 Subject: [Buildroot] [PATCH 2/2] configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository In-Reply-To: <20191102223839.16262-3-unixmania@gmail.com> References: <20191102223839.16262-1-unixmania@gmail.com> <20191102223839.16262-3-unixmania@gmail.com> Message-ID: <20191108221256.089bfa50@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, +Peter, who contributed the beagleboneai defconfig. On Sat, 2 Nov 2019 19:38:39 -0300 unixmania at gmail.com wrote: > From: Carlos Santos > > The original source URL (http://beagleboard.org/source) now redirects to > https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image > which points to an official kernel repository at GitHub. > > There are updated RT and non-RT kernel source trees. Use the last non-RT > release (4.19.73-ti-r29) and the omap2plus defconfig. > > Signed-off-by: Carlos Santos I've applied to next... but after doing, I realized that you could have used the github macro, like we do in beagleboneai_defconfig. Could you send a patch for that ? Also, it would be nice if we could align beagleboneai, beaglebone and beaglebone_qt5 to use the same U-Boot/Linux versions, if possible. I see that the beagleboneai is using 4.14 even though it's a much newer platform than beaglebone. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com