From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] configs/qemu_riscv{32, 64}_virt_defconfig: Remove BR2_TARGET_GENERIC_GETTY_PORT
Date: Sun, 22 Mar 2020 17:13:16 +0100 [thread overview]
Message-ID: <20200322161316.GI2364@scaer> (raw)
In-Reply-To: <20200322160115.GH2364@scaer>
Romain, Bin, All,
On 2020-03-22 17:01 +0100, Yann E. MORIN spake thusly:
> On 2020-03-22 16:52 +0100, Romain Naour spake thusly:
> > Le 07/03/2020 ? 13:20, Bin Meng a ?crit?:
> > > Currently BR2_TARGET_GENERIC_GETTY_PORT is set to ttyS0 in both
> > > qemu_riscv32_virt and qemu_riscv64_virt defconfig files. This
> > > limits usecases when the same one rootfs could be used on QEMU
> > > 'sifive_u' machine and SiFive HiFive Unleashed board.
> > >
> > > Remove it so that the default boot console can be used.
> >
> > By doing this change, we need to check if -nographic is used to start qemu (so
> > the serial port is the default console) or if console=ttyS0 is used in the
> > kernel command line.
> >
> > riscv32 and risc64 are both using -nographic to start Qemu.
> >
> > Your use case is similar to the one from [1]
> >
> > [1]
> > https://git.buildroot.net/buildroot/commit/?id=131300e6f1d0745a1455d246684550e6ecb68549
> >
> > Reviewed-by: Romain Naour <romain.naour@gmail.com>
>
> Thanks Romain for this review (and for bringing me in!)
>
> However, I disagree: these defconfig files are for qemu, not the real
> hardware.
>
> Additionally, we do have a configuration for the hifive unleashed board
> already, hifive_unleashed_defconfig, which is what should be used for
> the real hardware.
Romain pointed out on IRC that this change is in fact dual-sided:
- it allows the generic riscv defconfigs to boot on the real hardware
HiFive Unleashed board
- it allows the generic riscv defconfigs to boot on the emulated
HiFive Unleashed board which is known to qemu as sifive_u.
Still, my position does not change: if one wants to boot something in
the sifive_u which emulates a HiFive Unleashed board, then one better
use the original hifive_unleashed_defconfig, rather than the generic
riscv one.
Regards,
Yann E. MORIN.
> Regards,
> Yann E. MORIN.
>
> > Best regards,
> > Romain
> >
> >
> > >
> > > Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> > > ---
> > >
> > > configs/qemu_riscv32_virt_defconfig | 1 -
> > > configs/qemu_riscv64_virt_defconfig | 1 -
> > > 2 files changed, 2 deletions(-)
> > >
> > > diff --git a/configs/qemu_riscv32_virt_defconfig b/configs/qemu_riscv32_virt_defconfig
> > > index 914eada..093d888 100644
> > > --- a/configs/qemu_riscv32_virt_defconfig
> > > +++ b/configs/qemu_riscv32_virt_defconfig
> > > @@ -5,7 +5,6 @@ BR2_RISCV_32=y
> > > # System
> > > BR2_SYSTEM_DHCP="eth0"
> > > BR2_TARGET_GENERIC_GETTY=y
> > > -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> > > BR2_GLOBAL_PATCH_DIR="board/qemu/riscv32-virt/patches/"
> > >
> > > # Filesystem
> > > diff --git a/configs/qemu_riscv64_virt_defconfig b/configs/qemu_riscv64_virt_defconfig
> > > index 5c52f7a..54390fc 100644
> > > --- a/configs/qemu_riscv64_virt_defconfig
> > > +++ b/configs/qemu_riscv64_virt_defconfig
> > > @@ -5,7 +5,6 @@ BR2_RISCV_64=y
> > > # System
> > > BR2_SYSTEM_DHCP="eth0"
> > > BR2_TARGET_GENERIC_GETTY=y
> > > -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> > >
> > > # Filesystem
> > > BR2_TARGET_ROOTFS_EXT2=y
> > >
> >
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
>
> --
> .-----------------.--------------------.------------------.--------------------.
> | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
> | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
> '------------------------------^-------^------------------^--------------------'
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2020-03-22 16:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-07 12:20 [Buildroot] [PATCH] configs/qemu_riscv{32, 64}_virt_defconfig: Remove BR2_TARGET_GENERIC_GETTY_PORT Bin Meng
2020-03-12 1:50 ` Bin Meng
2020-03-17 1:49 ` Bin Meng
2020-03-22 15:52 ` Romain Naour
2020-03-22 16:01 ` Yann E. MORIN
2020-03-22 16:13 ` Yann E. MORIN [this message]
2020-03-23 5:38 ` Bin Meng
2020-04-21 21:19 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200322161316.GI2364@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox