From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 0/6] Support Python 3.x in U-Boot
Date: Fri, 15 May 2020 23:05:10 +0200 [thread overview]
Message-ID: <20200515210510.GH12536@scaer> (raw)
In-Reply-To: <20200502212812.51219-1-thomas.petazzoni@bootlin.com>
Thomas, All,
On 2020-05-02 23:28 +0200, Thomas Petazzoni spake thusly:
> Hello,
>
> Since 2020.01, U-Boot now uses python3 for its scripts, but our uboot
> package only supports adding a dependency on host-python, which causes
> a number of build failures of our defconfigs.
>
> To fix this, this series introduces additional U-Boot options with
> appropriate dependencies, and fixes the problematic defconfigs.
Series applied, with a few changes:
- I applied my proposal to handle the choice of host python version,
see the thread in patch 2
- I fixed the defconfig files as thus:
- for those that need pyelftools or pylibfdt, the NEEDS_PYTHON=y was
superfluous in the defconfig as it is selected by ither option,
- for the others that do not have pyelftools or pylibfdt, it has
become useless, because it no longer show/hides the choice anymore
Thanks!
Regards,
Yann E. MORIN.
> Thomas
>
> Thomas Petazzoni (6):
> package/python3-pyelftools: new package
> boot/uboot: support building U-Boot with Python 3.x
> configs/olimex_a20_olinuxino_lime{,2}: use Python 3.x
> configs/beelink_gs1: use Python 3.x
> configs/roc_pc_rk3399: fix U-Boot dependencies
> configs/nanopi_neo4: fix U-Boot dependencies
>
> boot/uboot/Config.in | 29 +++++++++++++++++++
> boot/uboot/uboot.mk | 12 +++++++-
> configs/beelink_gs1_defconfig | 2 ++
> configs/nanopi_neo4_defconfig | 4 +--
> configs/olimex_a20_olinuxino_lime2_defconfig | 2 ++
> configs/olimex_a20_olinuxino_lime_defconfig | 2 ++
> configs/roc_pc_rk3399_defconfig | 4 +--
> .../python-pyelftools/python-pyelftools.mk | 1 +
> .../python3-pyelftools.hash | 1 +
> .../python3-pyelftools/python3-pyelftools.mk | 17 +++++++++++
> 10 files changed, 69 insertions(+), 5 deletions(-)
> create mode 120000 package/python3-pyelftools/python3-pyelftools.hash
> create mode 100644 package/python3-pyelftools/python3-pyelftools.mk
>
> --
> 2.26.2
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2020-05-15 21:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-02 21:28 [Buildroot] [PATCH 0/6] Support Python 3.x in U-Boot Thomas Petazzoni
2020-05-02 21:28 ` [Buildroot] [PATCH 1/6] package/python3-pyelftools: new package Thomas Petazzoni
2020-05-02 21:28 ` [Buildroot] [PATCH 2/6] boot/uboot: support building U-Boot with Python 3.x Thomas Petazzoni
2020-05-03 8:02 ` Yann E. MORIN
2020-05-03 13:12 ` Thomas Petazzoni
2020-05-09 21:45 ` Yann E. MORIN
2020-05-02 21:28 ` [Buildroot] [PATCH 3/6] configs/olimex_a20_olinuxino_lime{, 2}: use " Thomas Petazzoni
2020-05-02 21:28 ` [Buildroot] [PATCH 4/6] configs/beelink_gs1: " Thomas Petazzoni
2020-05-02 21:58 ` Clément Péron
2020-05-02 21:28 ` [Buildroot] [PATCH 5/6] configs/roc_pc_rk3399: fix U-Boot dependencies Thomas Petazzoni
2020-05-02 21:28 ` [Buildroot] [PATCH 6/6] configs/nanopi_neo4: " Thomas Petazzoni
2020-05-15 21:05 ` Yann E. MORIN [this message]
2020-05-17 17:43 ` [Buildroot] [PATCH 0/6] Support Python 3.x in U-Boot Clément Péron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200515210510.GH12536@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox