[Buildroot] [PATCH 2/5] configs/mx6udoo: bump bsp versions and modify image

[Sergey Matyukevich <geomatsi@gmail.com>]

Hello Thomas,

> > diff --git a/board/udoo/mx6qdl/genimage.cfg b/board/udoo/mx6qdl/genimage.cfg
> > new file mode 100644
> > index 0000000000..46209120f0
> > --- /dev/null
> > +++ b/board/udoo/mx6qdl/genimage.cfg
> 
> Why do you introduce a genimage.cfg file? It is identical to the one in
> board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl,
> which I believe is already being used in the current defconfig.
> 
> > diff --git a/board/udoo/mx6qdl/post-build.sh b/board/udoo/mx6qdl/post-build.sh
> > new file mode 100755
> > index 0000000000..6ccd87fafd
> > --- /dev/null
> > +++ b/board/udoo/mx6qdl/post-build.sh
> > @@ -0,0 +1,7 @@
> > +#!/bin/sh
> > +
> > +BOARD_DIR="$(dirname $0)"
> > +
> > +install -d -m 755 $TARGET_DIR/boot
> > +$HOST_DIR/bin/mkimage -A arm -O linux -T script -C none  \
> > +	-n "boot script" -d $BOARD_DIR/boot.scr.txt $TARGET_DIR/boot/boot.scr
> 
> Could you use:
> 
> BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
> BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/udoo/mx6qdl/boot.scr.txt"
> 
> You will still need a post-build.sh script to copy from BINARIES_DIR to
> TARGET_DIR/boot, though.
> 
> > diff --git a/board/udoo/mx6qdl/post-image.sh b/board/udoo/mx6qdl/post-image.sh
> > new file mode 100755
> > index 0000000000..18e76aa40d
> > --- /dev/null
> > +++ b/board/udoo/mx6qdl/post-image.sh
> 
> Even if you cannot use for some reason the common post-image script
> from board/freescale/common/imx/, you could still use the generic
> support/scripts/genimage.sh... which you're anyway doing in a later
> commit.
> 
> > diff --git a/configs/mx6udoo_defconfig b/configs/mx6udoo_defconfig
> > index 86ad13bbf3..2cf13ae559 100644
> > --- a/configs/mx6udoo_defconfig
> > +++ b/configs/mx6udoo_defconfig
> > @@ -3,27 +3,30 @@ BR2_cortex_a9=y
> >  BR2_ARM_ENABLE_NEON=y
> >  BR2_ARM_ENABLE_VFP=y
> >  BR2_ARM_FPU_VFPV3=y
> > -# Linux headers same as kernel, a 4.14 series
> > -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
> > +# Linux headers same as kernel, a 5.8 series
> > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
> >  BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
> > -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
> 
> As asked above, any reason to no longer use this post-image script ?

All suggestions look reasonable. In fact, it looks like I have chosen the
wrong direction. For some reason I decided to switch both Udoo boards
from the common freescale infra to a custom one. However the opposite
needs to be done: both boards should use freescale common infra in order
to simplify maintenance. I will address review comments and submit v2.

Regards,
Sergey