From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 4/4] configs/stm32mp157c-dk2: add support for wifi
Date: Wed, 14 Oct 2020 19:02:48 +0200 [thread overview]
Message-ID: <20201014190248.2d91b51f@windsurf> (raw)
In-Reply-To: <20201007144945.1697081-4-shlomi.39sd@gmail.com>
On Wed, 7 Oct 2020 17:49:45 +0300
Shlomi Vaknin <shlomi.39sd@gmail.com> wrote:
> Adding support for wifi for stm32mp157c-dk2 is achieved by using
> another dts which includes the bindings for the wifi module.
> In addition, a txt file for the wifi firmware was added.
> This was copied from the yocto bsp layer of st.
>
> Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
> ---
> .../stm32mp157c-dk2/linux.config | 4 +-
> .../overlay/boot/extlinux/extlinux.conf | 2 +-
> .../brcmfmac43430-sdio.st,stm32mp157c-dk2.txt | 59 +++++++++++++++++++
> .../stm32mp157c-dk2/stm32mp157c-dk2-wifi.dts | 32 ++++++++++
> configs/stm32mp157c_dk2_defconfig | 7 ++-
> 5 files changed, 100 insertions(+), 4 deletions(-)
> create mode 100644 board/stmicroelectronics/stm32mp157c-dk2/overlay/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp157c-dk2.txt
> create mode 100644 board/stmicroelectronics/stm32mp157c-dk2/stm32mp157c-dk2-wifi.dts
Since there are still some issues apparently with this patch, I marked
it as Changes Requested.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2020-10-14 17:02 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-07 14:49 [Buildroot] [PATCH v3 1/4] boot/uboot: add stm32 binary format Shlomi Vaknin
2020-10-07 14:49 ` [Buildroot] [PATCH v3 2/4] configs/stm32mp157*: use trusted configuration Shlomi Vaknin
2020-10-12 18:08 ` Bartosz Bilas
2020-10-12 20:11 ` Shlomi Vaknin
2020-10-13 17:29 ` Bartosz Bilas
2020-10-14 17:02 ` Thomas Petazzoni
2020-10-07 14:49 ` [Buildroot] [PATCH v3 3/4] configs/stm32mp157*: bump kernel version Shlomi Vaknin
2020-10-14 17:02 ` Thomas Petazzoni
2020-10-07 14:49 ` [Buildroot] [PATCH v3 4/4] configs/stm32mp157c-dk2: add support for wifi Shlomi Vaknin
[not found] ` <15798cdd-e335-a291-53d4-1ac03d1bbd6c@grinn-global.com>
2020-10-07 19:27 ` Bartosz Bilas
2020-10-07 20:16 ` Shlomi Vaknin
2020-10-08 17:31 ` Bartosz Bilas
2020-10-08 20:45 ` Shlomi Vaknin
2020-10-09 16:49 ` Bartosz Bilas
2020-10-09 19:13 ` Shlomi Vaknin
2020-10-10 15:41 ` Bartosz Bilas
2020-10-10 18:08 ` Shlomi Vaknin
2020-10-10 18:59 ` Shlomi Vaknin
2020-10-10 19:01 ` Bartosz Bilas
2020-10-10 20:48 ` Shlomi Vaknin
2020-10-12 14:49 ` Bartosz Bilas
2020-10-12 17:35 ` Shlomi Vaknin
2020-10-12 18:15 ` Bartosz Bilas
2020-10-14 17:02 ` Thomas Petazzoni [this message]
2020-11-01 11:08 ` Sergey Matyukevich
2020-10-14 17:00 ` [Buildroot] [PATCH v3 1/4] boot/uboot: add stm32 binary format Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014190248.2d91b51f@windsurf \
--to=thomas.petazzoni@bootlin.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox