From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Thu, 21 Jan 2021 22:44:36 +0100 Subject: [Buildroot] [PATCH v2, 2/2] Replace LIBFOO_CPE_ID_NAME by LIBFOO_CPE_ID_PRODUCT In-Reply-To: <20210118174151.420304-2-fontaine.fabrice@gmail.com> References: <20210118174151.420304-1-fontaine.fabrice@gmail.com> <20210118174151.420304-2-fontaine.fabrice@gmail.com> Message-ID: <20210121224436.1df7f6aa@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Mon, 18 Jan 2021 18:41:51 +0100 Fabrice Fontaine wrote: > Replace LIBFOO_CPE_ID_NAME by LIBFOO_CPE_ID_PRODUCT to better "comply" > with the official "Well-Formed CPE Name Data Model" parameters: > - https://csrc.nist.gov/publications/detail/nistir/7695/final > - https://nvlpubs.nist.gov/nistpubs/Legacy/IR/nistir7695.pdf > > It should be noted that the following parameters could also be replaced > in following commits to increase compliance with above specification: > - LIBFOO_CPE_ID_VERSION_MINOR -> LIBFOO_CPE_ID_UPDATE > - LIBFOO_CPE_ID_PREFIX -> LIBFOO_CPE_VERSION (i.e. 2.3) and > LIBFOO_CPE_ID_PART (a for applications, o for operating systems or h > for hardware) This second paragraph doesn't really belong to a commit log, as it talks about "other things that could be done". So, I dropped this part of the commit, refreshed the patch to take into account other CPE_ID_NAME variables that were introduced since then, and applied. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com