From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 1/1] package/tvheadend: add various options to disable optional components
Date: Sat, 3 Apr 2021 17:37:33 +0200 [thread overview]
Message-ID: <20210403153733.GC2252@scaer> (raw)
In-Reply-To: <20210403152234.2006719-1-bernd.kuhls@t-online.de>
Bernd, All,
On 2021-04-03 17:22 +0200, Bernd Kuhls spake thusly:
> When enabled some IPTV streams are piped using /usr/bin/ffmpeg so make
> sure that the ffmpeg binary is present.
>
> Transcoding support can already be disabled reducing /usr/bin/tvheadend
> by 1,03MB.
>
> By disabling all new options provided by this patch the binary size can
> additionally be reduced by 2,08MB.
>
> Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
> ---
[--SNIP--]
> +config BR2_PACKAGE_TVHEADEND_IPTV
> + bool "IPTV support"
> + default y
> + select BR2_PACKAGE_FFMPEG_FFMPEG if BR2_PACKAGE_FFMPEG # runtime
As we discussed in the previous thread, IPTV really only works fully
when ffmpeg (the program) is available, which wil not be the case if
ffmpeg (the package) is not enabled.
As I suggested previously, we should ensure that ffmpeg is enabled:
config BR2_PACKAGE_TVHEADEND_IPTV
bool "IPTV support"
depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
select BR2_PACKAGE_FFMPEG # runtime
select BR2_PACKAGE_FFMPEG_FFMPEG # runtime
If you agree, I can change that when applying...
Regards,
Yann E. MORIN.
> + help
> + Enable IPTV support.
> +
> +config BR2_PACKAGE_TVHEADEND_SATIP
> + bool "SAT>IP support"
> + default y
> + help
> + Enable SAT>IP support.
> +
> +config BR2_PACKAGE_TVHEADEND_TIMESHIFT
> + bool "timeshift support"
> + default y
> + help
> + Enable timeshift support.
> +
> config BR2_PACKAGE_TVHEADEND_TRANSCODING
> bool "transcoding support"
> depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
> diff --git a/package/tvheadend/tvheadend.mk b/package/tvheadend/tvheadend.mk
> index 114142bfa9..b694c44e3b 100644
> --- a/package/tvheadend/tvheadend.mk
> +++ b/package/tvheadend/tvheadend.mk
> @@ -63,6 +63,40 @@ TVHEADEND_CONF_OPTS += \
> --disable-libx265
> endif
>
> +ifeq ($(BR2_PACKAGE_TVHEADEND_DESCRAMBLER),y)
> +TVHEADEND_CONF_OPTS += \
> + --enable-cardclient \
> + --enable-cwc \
> + --enable-cccam \
> + --enable-capmt \
> + --enable-constcw
> +else
> +TVHEADEND_CONF_OPTS += \
> + --disable-cardclient \
> + --disable-cwc \
> + --disable-cccam \
> + --disable-capmt \
> + --disable-constcw
> +endif
> +
> +ifeq ($(BR2_PACKAGE_TVHEADEND_IPTV),y)
> +TVHEADEND_CONF_OPTS += --enable-iptv
> +else
> +TVHEADEND_CONF_OPTS += --disable-iptv
> +endif
> +
> +ifeq ($(BR2_PACKAGE_TVHEADEND_SATIP),y)
> +TVHEADEND_CONF_OPTS += --enable-satip_client --enable-satip_server
> +else
> +TVHEADEND_CONF_OPTS += --disable-satip_client --disable-satip_server
> +endif
> +
> +ifeq ($(BR2_PACKAGE_TVHEADEND_TIMESHIFT),y)
> +TVHEADEND_CONF_OPTS += --enable-timeshift
> +else
> +TVHEADEND_CONF_OPTS += --disable-timeshift
> +endif
> +
> ifeq ($(BR2_PACKAGE_LIBDVBCSA),y)
> TVHEADEND_DEPENDENCIES += libdvbcsa
> TVHEADEND_CONF_OPTS += --enable-tvhcsa
> --
> 2.29.2
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2021-04-03 15:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-03 15:22 [Buildroot] [PATCH v2 1/1] package/tvheadend: add various options to disable optional components Bernd Kuhls
2021-04-03 15:37 ` Yann E. MORIN [this message]
2021-04-04 12:30 ` Yann E. MORIN
2021-04-04 14:54 ` Bernd Kuhls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210403153733.GC2252@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox