From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Seiderer Date: Thu, 8 Apr 2021 23:42:04 +0200 Subject: [Buildroot] Smart pi touch problems In-Reply-To: <1617885845138-0.post@n4.nabble.com> References: <1617885845138-0.post@n4.nabble.com> Message-ID: <20210408234204.767594ae@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Aziz, On Thu, 8 Apr 2021 07:44:05 -0500 (CDT), dzeko1234 via buildroot wrote: > Hello , I am deploying a Qt app on RPI3 target using buildroot toolchain . > Also i generated Rpi image from Buildroot . So i would like to use the Pi > touchscreen but I don't know how to configure it . Currently my App appears > on rpi but the touchscreen doesn't work . > Any helps please > thank you Did you enable/configure the appropriate device tree overlay for your touchscreen (see [1], [2])? Regards, Peter [1] https://www.raspberrypi.org/documentation/configuration/device-tree.md [2] https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README > > > > -- > Sent from: http://buildroot-busybox.2317881.n4.nabble.com/ > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot