[Buildroot] [PATCH 0/4] Support for the Beagle-V platform

[Thomas Petazzoni <thomas.petazzoni@bootlin.com>]

Hello,

On Thu, 29 Apr 2021 15:52:14 +0200
Erico Nunes <nunes.erico@gmail.com> wrote:

> > > Ok, thanks, I will give it a try anyway.
> > > I noticed that the manual build instructions in
> > > https://wiki.seeedstudio.com/BeagleV-Make-File-System-Compile-uboot-Kernal/#compile-u-boot
> > > suggest a CONFIG_SYS_TEXT_BASE=0x80020000 change and as far as I see
> > > this is not in the build here, so maybe that could be related too.  
> >
> > The kernel is relocated to 80020000 by U-Boot before booting, in the
> > configuration I'm providing. See the boot log in the cover letter:
> >
> > """
> > Moving Image from 0x84000000 to 0x80200000, end=80f1b000
> > """  
> 
> This is 0x80200000, not 0x80020000.

Ah, you're right (of course). The U-Boot configuration I'm using from
the U-Boot defconfig provided by Starfive indeed has
CONFIG_SYS_TEXT_BASE=0x80200000 and not the 0x80020000 you're
mentioning. I'll give it a try.

But I just checked, and the image that was already flashed on my
Beagle-V was using 0x80200000 to load the kernel.

Best regards,

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com