From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 3/7] configs/beaglev_defconfig: new defconfig
Date: Sat, 8 May 2021 00:02:32 +0200 [thread overview]
Message-ID: <20210507220232.GD2137340@scaer> (raw)
In-Reply-To: <20210504205139.1055360-4-thomas.petazzoni@bootlin.com>
Thomas, All,
On 2021-05-04 22:51 +0200, Thomas Petazzoni spake thusly:
> This commit introduces support for the RISC-V based BeagleV platform,
> which uses a Starfive JH7100.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ---
[--SNIP--]
> diff --git a/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch b/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch
> new file mode 100644
> index 0000000000..74d70f2721
> --- /dev/null
> +++ b/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch
> @@ -0,0 +1,39 @@
> +From 2c4c813940c577590f3352cef0c49a8def17905d Mon Sep 17 00:00:00 2001
> +From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> +Date: Wed, 28 Apr 2021 22:58:45 +0200
> +Subject: [PATCH] include/configs/starfive-vic7100: adjust fdt_addr_r
> +
> +The default fdt_addr_r of 0x88000000 doesn't work, the kernel never
> +boots. Using 0x90000000 works fine.
> +
> +Since it would overlap with the kernel_comp_addr_r area, this one is
> +moved 16 MB further, at 0x91000000.
Is this something that is so board specific that we can't upstream it?
[--SNIP--]
> diff --git a/board/beaglev/post-build.sh b/board/beaglev/post-build.sh
> new file mode 100755
> index 0000000000..e303d4b8d9
> --- /dev/null
> +++ b/board/beaglev/post-build.sh
> @@ -0,0 +1,17 @@
> +#!/bin/sh
> +BOARD_DIR=$(dirname $0)
> +
> +# The DTB to use is provided within the U-Boot source tree, so we grab
> +# it from there, and install it to TARGET_DIR/boot/.
> +UBOOT_DIR=$(make -C ${CONFIG_DIR} --no-print-directory VARS=UBOOT_DIR printvars | cut -f2 -d'=')
Here, I've used eval, as suggested in the manual:
eval $(make -C ${CONFIG_DIR} --no-print-directory QUOTED_VARS=YES VARS=UBOOT_DIR printvars)
Applied to master, thanks.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2021-05-07 22:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 20:51 [Buildroot] [PATCH v3 0/7] Support for the BeagleV platform Thomas Petazzoni
2021-05-04 20:51 ` [Buildroot] [PATCH v3 1/7] package/Makefile.in: expose CONFIG_DIR to post-build/post-image scripts Thomas Petazzoni
2021-05-06 21:03 ` Yann E. MORIN
2021-05-08 14:32 ` Peter Korsgaard
2021-05-04 20:51 ` [Buildroot] [PATCH v3 2/7] boot/opensbi: add options to enable/disable image installation Thomas Petazzoni
2021-05-05 1:03 ` Alistair Francis
2021-05-04 20:51 ` [Buildroot] [PATCH v3 3/7] configs/beaglev_defconfig: new defconfig Thomas Petazzoni
2021-05-05 1:05 ` Alistair Francis
2021-05-07 22:02 ` Yann E. MORIN [this message]
2021-05-08 18:23 ` Thomas Petazzoni
2021-05-04 20:51 ` [Buildroot] [PATCH v3 4/7] package/riscv64-elf-toolchain: new package Thomas Petazzoni
2021-05-04 20:51 ` [Buildroot] [PATCH v3 5/7] boot/beaglev-ddrinit: " Thomas Petazzoni
2021-05-07 22:04 ` Yann E. MORIN
2021-05-07 22:06 ` Yann E. MORIN
2021-05-07 23:30 ` Drew Fustini
2021-05-08 7:37 ` Yann E. MORIN
2021-05-08 7:48 ` Drew Fustini
2021-05-08 16:01 ` Khem Raj
2021-05-08 18:20 ` Yann E. MORIN
2021-05-08 19:54 ` Drew Fustini
2021-05-08 21:10 ` Drew Fustini
2021-05-08 22:09 ` Khem Raj
2021-05-09 20:23 ` Drew Fustini
2021-05-09 20:26 ` Khem Raj
2021-05-09 20:34 ` Drew Fustini
2021-05-08 18:21 ` Thomas Petazzoni
2021-05-09 11:03 ` Arnout Vandecappelle
2021-05-09 11:04 ` Arnout Vandecappelle
2021-05-09 20:29 ` Drew Fustini
2021-05-09 20:31 ` Khem Raj
2021-05-10 7:02 ` Drew Fustini
2021-05-10 9:07 ` Peter Korsgaard
2021-05-04 20:51 ` [Buildroot] [PATCH v3 6/7] boot/beaglev-secondboot: " Thomas Petazzoni
2021-05-07 22:07 ` Yann E. MORIN
2021-05-04 20:51 ` [Buildroot] [PATCH v3 7/7] configs/beaglev: enable building of low-level firmware Thomas Petazzoni
2021-05-07 22:08 ` Yann E. MORIN
2021-05-07 22:00 ` [Buildroot] [PATCH v3 0/7] Support for the BeagleV platform Yann E. MORIN
2021-05-14 21:06 ` Drew Fustini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210507220232.GD2137340@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox