From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 3/6] package/seatd: new package
Date: Sun, 16 May 2021 15:54:51 +0200 [thread overview]
Message-ID: <20210516135451.GF2506@scaer> (raw)
In-Reply-To: <20210513163325.1775639-4-aperez@igalia.com>
Adrian, All,
On 2021-05-13 19:33 +0300, Adrian Perez de Castro spake thusly:
> Introduce a seatd package, which can be used by wlroots 0.12.0 and
> newer. The package includes both a library (always built) and an
> optional seat management daemon.
>
> The library can use systemd-logind, the seatd daemon, or a simple
> builtin in-process mode. Build options are introduced for each of them.
> At least one backend needs to be built; if both logind and seatd are
> disabled the builtin backend will be enabled unconditionally.
>
> Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[--SNIP--]
> diff --git a/package/seatd/Config.in b/package/seatd/Config.in
> new file mode 100644
> index 0000000000..a921e0e01c
> --- /dev/null
> +++ b/package/seatd/Config.in
> @@ -0,0 +1,48 @@
> +menuconfig BR2_PACKAGE_SEATD
> + bool "seatd"
> + select BR2_PACKAGE_SEATD_LIBSEAT
> + help
> + Seat management daemon and support library.
> +
> + https://git.sr.ht/~kennylevinsen/seatd
> +
> +if BR2_PACKAGE_SEATD
> +
> +config BR2_PACKAGE_SEATD_LIBSEAT
Why do you need a separate option BR2_PACKAGE_SEATD_LIBSEAT? If the
package is not enabled, that option is not visible; if the package is
enabled, that option is forcibly set... So, I fail to see a reason for
it...
> + bool "libseat"
> + select BR2_PACKAGE_SEATD_LIBSEAT_BUILTIN \
> + if !BR2_PACKAGE_SEATD_LIBSEAT_LOGIND && !BR2_PACKAGE_SEATD_LIBSEAT_SEATD
... and the select it does can be moved to the main symbol without any
issue, AFAICS...
> +if BR2_PACKAGE_SEATD_LIBSEAT
> +
> +config BR2_PACKAGE_SEATD_LIBSEAT_LOGIND
> + bool "logind backend"
> + default y
We usually do not default y, unless there is a very good reason for it.
In this case, I would even drop the option completely, and just enable
the logind support in the makefile:
ifeq ($(BR2_PACKAGE_SYSTEMD_LOGIND),y)
SEATD_CONF_OPTS += -Dlogind=enabled
else
SEATD_CONF_OPTS += -Dlogind=disabled
endif
Also, don't you need a "SEATD_DPENDENCIES += systemd" in that case?
> + depends on BR2_PACKAGE_SYSTEMD_LOGIND
> + help
> + Support using logind for seat management.
> +
> +comment "logind backend needs systemd-logind"
> + depends on !BR2_PACKAGE_SYSTEMD_LOGIND
> +
> +config BR2_PACKAGE_SEATD_LIBSEAT_SEATD
> + bool "seatd backend"
> + default y
> + depends on BR2_PACKAGE_SEATD_SEATD
> + help
> + Support using seatd for seat management.
Ditto: I would also drop the option and enable the seatd backend if the
daemon is enabled.
> +comment "seatd backend needs seatd daemon"
> + depends on !BR2_PACKAGE_SEATD_SEATD
> +
> +config BR2_PACKAGE_SEATD_LIBSEAT_BUILTIN
> + bool "builtin backend"
> + help
> + Builtin in-process seatd implementation.
And thus, we'd just have this one option, which gets forcibly selected
when neither systemd-logind nor the seatd daemone are enabled;
config BR2_PACKAGE_SEATD
bool "seatd"
select BR2_PACKAGE_SEATD_LIBSEAT_BUILTIN \
if !BR2_PACKAGE_SYSTEMD_LOGIND \
&& !BR2_PACKAGE_SEATD_SEATD
Regards,
Yann E. MORIN.
> +endif
> +
> +config BR2_PACKAGE_SEATD_SEATD
> + bool "seatd daemon"
> +
> +endif
> diff --git a/package/seatd/seatd.hash b/package/seatd/seatd.hash
> new file mode 100644
> index 0000000000..342079e958
> --- /dev/null
> +++ b/package/seatd/seatd.hash
> @@ -0,0 +1,5 @@
> +# Calculated locally
> +sha256 274b56324fc81ca6002bc1cdd387668dee34a6e1063e5f3896805c3770948988 0.5.0.tar.gz
> +
> +# License files
> +sha256 282a494803d666616bd726e0279636b5f6a31387ae19a707459074050f2600d3 LICENSE
> diff --git a/package/seatd/seatd.mk b/package/seatd/seatd.mk
> new file mode 100644
> index 0000000000..45da53904f
> --- /dev/null
> +++ b/package/seatd/seatd.mk
> @@ -0,0 +1,42 @@
> +################################################################################
> +#
> +# seatd
> +#
> +################################################################################
> +
> +SEATD_VERSION = 0.5.0
> +SEATD_SOURCE = $(SEATD_VERSION).tar.gz
> +SEATD_SITE = https://git.sr.ht/~kennylevinsen/seatd/archive
> +SEATD_LICENSE = MIT
> +SEATD_LICENSE_FILES = LICENSE
> +SEATD_INSTALL_STAGING = YES
> +
> +SEATD_CONF_OPTS += \
> + -Dman-pages=disabled \
> + -Dexamples=disabled
> +
> +ifeq ($(BR2_PACKAGE_SEATD_LIBSEAT_LOGIND),y)
> +SEATD_CONF_OPTS += -Dlogind=enabled
> +else
> +SEATD_CONF_OPTS += -Dlogind=disabled
> +endif
> +
> +ifeq ($(BR2_PACKAGE_SEATD_LIBSEAT_SEATD),y)
> +SEATD_CONF_OPTS += -Dseatd=enabled
> +else
> +SEATD_CONF_OPTS += -Dseatd=disabled
> +endif
> +
> +ifeq ($(BR2_PACKAGE_SEATD_LIBSEAT_BUILTIN),y)
> +SEATD_CONF_OPTS += -Dbuiltin=enabled
> +else
> +SEATD_CONF_OPTS += -Dbuiltin=disabled
> +endif
> +
> +ifeq ($(BR2_PACKAGE_SEATD_SEATD),y)
> +SEATD_CONF_OPTS += -Dserver=enabled
> +else
> +SEATD_CONF_OPTS += -Dserver=disabled
> +endif
> +
> +$(eval $(meson-package))
> --
> 2.31.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2021-05-16 13:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 16:33 [Buildroot] [PATCH 0/6] Update Cage, wlroots, and wayland Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 1/6] package/wayland: bump to version 1.19.0 Adrian Perez de Castro
2021-05-16 14:04 ` Yann E. MORIN
2021-05-18 12:13 ` Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 2/6] package/wlroots: bump to version 0.13.0 Adrian Perez de Castro
2021-05-16 13:41 ` Yann E. MORIN
2021-05-18 12:22 ` Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 3/6] package/seatd: new package Adrian Perez de Castro
2021-05-16 13:54 ` Yann E. MORIN [this message]
2021-05-18 13:17 ` Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 4/6] package/seatd: install init scripts Adrian Perez de Castro
2021-05-16 14:00 ` Yann E. MORIN
2021-05-18 13:33 ` Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 5/6] package/wlroots: use libseat when available Adrian Perez de Castro
2021-05-13 16:33 ` [Buildroot] [PATCH 6/6] package/cage: bump to version 0.1.3 Adrian Perez de Castro
2021-05-16 14:07 ` [Buildroot] [PATCH 0/6] Update Cage, wlroots, and wayland Yann E. MORIN
2021-05-18 13:54 ` [Buildroot] [PATCH v2 0/5] " Adrian Perez de Castro
2021-05-18 13:54 ` [Buildroot] [PATCH v2 1/5] package/wlroots: bump to version 0.13.0 Adrian Perez de Castro
2021-05-18 13:54 ` [Buildroot] [PATCH v2 2/5] package/seatd: new package Adrian Perez de Castro
2021-05-18 13:54 ` [Buildroot] [PATCH v2 3/5] package/seatd: install init scripts Adrian Perez de Castro
2021-05-18 13:54 ` [Buildroot] [PATCH v2 4/5] package/wlroots: use libseat when available Adrian Perez de Castro
2021-05-18 13:54 ` [Buildroot] [PATCH v2 5/5] package/cage: bump to version 0.1.3 Adrian Perez de Castro
2021-05-18 14:00 ` [Buildroot] [PATCH v2 0/5] Update Cage, wlroots, and wayland Adrian Perez de Castro
2021-05-18 17:11 ` Yann E. MORIN
2021-05-27 13:41 ` Adrian Perez de Castro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210516135451.GF2506@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox